Navman MiVue Stealth Bedienungsanleitung

Navman Dashcam MiVue Stealth

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Navman MiVue Stealth (2 Seiten) in der Kategorie Dashcam. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

User Manual

DDR MiVue Stealth Series

Revision: R01

(10/2018)

Trademark

All brand and product names are trademarks or registered trademarks of their respective companies.

Disclaimer

Speciﬁcations and documents are subject to change without notice. Navman does not warrant this document

is error-free. Navman assumes no liability for damage incurred directly or indirectly from errors, omissions, or

discrepancies between the device and the documents.

Note

Not all models are available in all regions.

Depending on the speciﬁc model purchased, the colour and look of your device and accessories may not exactly

match the graphics shown in this document.

Regulatory information

For regulatory identiﬁcation purposes, Navman DDR MiVue Stealth Series is assigned a model number of N606.

Marking labels located on the exterior of your device indicate the regulations that your model complies with. Please

check the marking labels on your device and refer to the corresponding statements in this section. Some notices

apply to speciﬁc models only. The user needs to switch off the device when exposed to areas with potentially

explosive atmospheres such as petrol stations, chemical storage depots and blasting operations.

5 6 1 5 N 6 0 6 0 0 0 5 R 0 1

10. Governing Law and interpretation.

Where the Licensed Product was acquired by the original retail purchaser in Australia, this Licence is

governed by the laws of New South Wales, the parties submit to the non-exclusive jurisdiction of the courts of

New South Wales. Where the Licensed Product was acquired by the original retail purchaser in New Zealand,

this Licence is governed by the laws of New Zealand, the parties submit to the non-exclusive jurisdiction of the

courts of New Zealand. The term "Navman" refers to MiTAC Australia Pty Ltd of Unit 5, 43-51 College Street,

Gladesville, NSW 2111, Australia.

Privacy notice

Location Information

The Navman device and software a customer uses may, by its nature and function, create, contain, receive,

store, or transmit location based information that, either alone or in combination with other information, could

identify a person, establish a person's whereabouts, reveal the nature or type of places that a person visits or in

which a person is interested, or identify a person's movements, habits, and other information about a person

("Location Information"). This Location Information is used to provide location related services to customers. For

this purpose, Navman* may disclose Location Information to its related companies, service providers, and agents

which may be located overseas in countries including the USA, China, Taiwan, Australia, New Zealand and the

Philippines. Except as explained below in relation to country location when using connected device features, it

is Navman's policy not to collect or store Location Information, or to provide Location Information to unafﬁliated

third parties or persons who are not agents or service providers of Navman, without ﬁrst receiving the consent

of the customer (such as where the customer subscribes to, or directly or indirectly requests, location-based

or similar services from Navman or a third party). Notwithstanding this clause, if, and to the extent that, a court

order, subpoena, or rule of law requires that Navman disclose Location Information to a third party, Navman

reserves the right to comply with such court order, subpoena, or rule of law.

Connected Device Information

If the customer accesses the Navman connected device feature (or a similar feature), including from a website

or mobile device, Navman may collect personal information about the customer through the connected device,

such as the customer’s username, email address, social networking account username (if the customer chooses

to connect to its social networking account), what country the customer is located in when using the device (but

not other Location Information), and internet protocol address, (“Connected Device Information”). Connected

Device Information may be automatically synced between the customer's compatible and connected devices.

When a customer uses the connected device feature, Location Information and dashcam recordings pass

temporarily through our cloud infrastructure and to your device for the purpose of providing that service to you.

However, we do not collect or store this data (except country location as explained above), even temporarily.

Navman will use this information to fulﬁl the customer’s requests for products and services, for communication,

to offer products or services related to the customer’s location (including by providing information about

local businesses onto the customer's Navman device), interests and preferences and to assist Navman in

its development of products and services. Connected Device Information may be provided to Navman's

related companies, agents and third party service providers to enable Navman to deliver programs, products,

information and services and to maintain Navman’s websites, mailing lists and other services. The recipients that

Connected Device Information is provided to may be located in different countries to that in which the customer

is based, including in the USA, China, Taiwan, Australia, New Zealand and the Philippines. The third parties that

data is provided to may include social media providers if the customer has linked the connected device feature to

a social media account. Connected Device Information will not be transferred to third parties that are not acting

on behalf of Navman without the customer’s consent unless required by law or for the purposes disclosed in this

clause. The customer may choose not to provide Connected Device Information to Navman, but this may cause

certain features of the connected device to be unavailable.

services or paying the cost of having the services re-supplied, and Navman does not exclude or limit the

operation of the Consumer Guarantees under any other provision of this warranty or in any other manner

and you agree it is fair and reasonable in all the circumstances for Navman's liability to be so limited.

6.3. Business Supplies in New Zealand

In New Zealand, where both Navman and you are ‘in trade’ and you are acquiring the goods and services for

the purposes of a business, then both Navman and you acknowledge and agree that the statutory guarantees

and implied terms, covenants and conditions contained in the New Zealand Consumer Guarantees Act 1993

are excluded to the fullest extent permitted by law and do not apply, and Navman does not exclude or limit the

operation of the Consumer Guarantees under any other provision of this warranty or in any other manner and

you agree it is fair and reasonable in all the circumstances for Navman's liability to be so limited.

7. Disclaimers and Other Provisions

To the extent permitted by law and except for the Consumer Guarantees and the warranty described above,

Navman excludes all representations, guarantees, conditions, warranties rights and remedies, liabilities and

other terms that may be conferred or implied by statute, general law or custom, in fact or otherwise except any

guarantee, implied term or right conferred under any legislation (including the Australian Consumer Law and

the New Zealand Consumer Guarantees Act 1993), the exclusion of which would contravene legislation or

cause part or all of this clause to be void and the customer acknowledges that Navman does not warrant that the

operation of the product will be continuous or error-free.

Except for liability for a breach of a Consumer Guarantee (a) Navman will not, under any circumstances, be liable

under the law of tort (including negligence), contract, or otherwise for any loss of proﬁts or loss of data or any

indirect or consequential loss or damage, however caused, arising out of or in connection with the product; (b)

Navman’s aggregate liability for all claims arising out of or in connection with the product will be limited to the

total amount actually and originally paid at retail by the customer for the product.

8. Privacy Notice

We collect the personal information you provide when you obtain this warranty and if you make a warranty claim

to provide the warranty and any warranty service. We collect this information either directly from you or from the

agent which handles our warranty claims.

We may disclose your personal information to: (i) the agent which handles our warranty claims; (ii) our related

companies, our employees and agents; (iii) anyone required or authorised by law; and (iv) anyone else you

authorise. These recipients may be located overseas including in Australia, New Zealand, Taiwan, the USA, China

and the Philippines.

Our policy on the collection, use and disclosure of your personal information is set out in our Privacy Policy

available at https://www.navman.com.au/privacy. Our policy contains details about how to access or correct

the personal information we hold and how to complain about a privacy breach and how we will handle such a

complaint.

9. Disclaimer

In the event of improvements to the product, and software, or in limited circumstances where events occur

outside Navman's control, speciﬁcations and documents may be subject to change without notice. While

Navman has taken reasonable care to ensure the accuracy of this document, due to circumstances outside of

Navman's control, Navman cannot warrant this document is at all times error-free.

10. Notes

Not all models are available in all regions. Depending upon the speciﬁc model purchased, the colour and look of

your device and accessories may not exactly match the graphics shown in this document. The screenshots and

other presentations shown in this document are for reference only. They may differ from the actual screens and

presentations generated by the actual product.

Information Storage

Any Location Information or Connected Device Information will be collected and held by CloudMade Inc., 1370

Willow Road, Menlo Park, CA 94025, USA (a third party company which provides cloud services to us), MiTAC

Australia Pty Ltd, Unit 5, 43-51 College Street, Gladesville, NSW 2111, Australia. Navman will take reasonable steps

to secure any Location Information or Connected Device Information about the customer.

Access, correction and complaints

The customer may request to see a copy of the Location Information or Connected Device Information held by

Navman about the customer, and can request corrections to be made to the Location Information or Connected

Device Information. Navman's privacy policy contains information about how a customer may exercise their rights

under the foregoing sentence, how a customer may complain about any breach of privacy laws or applicable

codes, and how Navman will deal with such a complaint. Navman's privacy policy is available at

https://www.

navman.com.au/privacy

* In this Privacy Notice, the term "Navman" means MiTAC Australia Pty Ltd (an entity registered in Australia and

New Zealand and trading as Mitac Professional Solutions, Magellan GPS Technology, MIO TECHNOLOGY and

NAVMAN TECHNOLOGY.

2-year limited warranty

The 2-year limited warranty applies separately to your use of the product, and should be read independently of

the other terms contained in the user manual.

1. Scope.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law and the New

Zealand Consumer Guarantees Act 1993. You are entitled to a replacement or refund for a major failure and

for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods

repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Where a product is comprised of both hardware and software and a separate software licence is provided with the

product, the terms of the software licence apply to the software and this limited warranty applies only to the hardware

portion of the product. This section does affect any rights you may have under the Consumer Guarantees (as deﬁned

below).

This warranty is given by MiTAC Australia Pty Ltd ("Navman”), in Australia and New Zealand.

2. Warranty.

Apart from any rights that you may have because of the Consumer Guarantees (as deﬁned below), Navman warrants

to the original end-user retail purchaser from an authorized Navman dealer that this product will be free from defects

in material and workmanship and (where a User Manual is provided) will substantially conform to the speciﬁcations

and descriptions in the User Manual for the Warranty Period. The "Warranty Period" is two years from the date of

original retail purchase in Australia and New Zealand, as supported by a complete, legible and dated copy of the

original sales receipt.

3. Exclusions and Limitations.

This section sets out exclusions and limitations which apply to the warranty. It does not affect the rights of any

person under the Consumer Guarantees (as deﬁned below). This warranty does not cover any non-rechargeable

batteries, ﬁnishes, service performed or attempted by anyone other than an authorised Navman Service Centre,

installations or defects caused by improper installation, any products, components or parts not manufactured

by Navman, any claim in relation to infringement of any patent, trademark, copyright or other proprietary right,

including trade secrets, any damage or failure of the product caused by shipping, misuse, tampering, abuse,

negligence, wear and tear in excess of that expected from normal consumer use, unauthorised attachments or

modiﬁcation, failure to maintain as recommended, electrical discharges (including lightning), exposure to water

(except as otherwise stated in the User Manual), moisture or liquids, proximity or exposure to heat, disasters such

as ﬁre, ﬂood, wind, and lightning, or failure of availability or reliability of any external resource necessary or useful

for the product's operation (for example, and to the extent applicable, the global positioning system constellation of

satellites and their transmissions; trafﬁc, weather, navigation, point-of-interest, or other data; and radio-frequency

or other wired or wireless signals, whether transferring data or otherwise). Improper or incorrectly performed

maintenance or repair, commercial use, or alteration or removal of any serial number or the opening, dismantling

or repair of this product by anyone other than an authorised Navman Service Centre each will void this warranty.

To the extent that the product is used or useful for navigation: (a) the product, including any associated electronic

charts or maps, navigation data, or radio or other services, is a supplement to other navigational resources and not

a replacement of them; (b) the product does not replace any charts, maps, or other information required by law

to be used for any activity (such as nautical or aeronautical charts); (c) errors and omissions are inevitable; (d) the

user is responsible for cross-checking the product against other sources of navigation information; and (e) Navman

recommends having back-up navigation tools available in the event that the product becomes inoperable.

4. Remedies and How to Obtain Warranty Service.

If the product is defective or fails to conform with the warranted speciﬁcations, and you send the product and all

other required information and materials to Navman, or return it to the retail outlet from which it was purchased,

on or before the last day of the Warranty Period (refer to the process at 1 to 3 below), , Navman will repair or

replace (at Navman's option) the product. This is your remedy for defective or non-conforming products under

Navman's warranty. You may have other rights or remedies under applicable laws (including under the Consumer

Guarantees, as deﬁned below).

To obtain your warranty service:

1. Contact Navman to obtain a Return Materials Authorization number (RMA). You can reach Navman using the

Contact Details outlined at 3 below or through your authorized Navman dealer.

2. Pack the product, a copy of your dated purchase receipt, your address and telephone number, and any other

information Navman requests as part of the return authorization process (such as any return authorization form

you receive) in sturdy packing material.

Ship the product and the other required items to Navman at the address speciﬁed in the Contact Details below,

or return it to the retail outlet from which it was purchased, on or up to the end of the Warranty Period. You

should retain proof of shipping to evidence the date of shipment. Please send the item by registered post for

tracking purposes.

Contact Details:

In Australia: In New Zealand:

Attention: MiTAC Repairs New Zealand Couriers INTL

Locked bag 5010 Attention: Senita

Gladesville Navman Returns

NSW 1675 32 Botha Rd

1300 628 626 Penrose

Email: pcnsupportaus@navman.com.au Auckland

0800 466 286

Email: pcnsupportaus@navman.com.au

When returning products you must set out:

Sender's name: ...................................................................................

Sender's address: ...................................................................................

Sender's phone: ...................................................................................

Sender's email: ...................................................................................

Safety precautions

About the PowerBox and the vehicle power adapter

• Use only the vehicle power adapter supplied with your device. Use of another type of the vehicle power

adapter may result in malfunction and/or danger.

• It is recommended that you contact a skilled installer (for example, the service personnel of the vehicle) for

PowerBox installation and assistance.

• This product is intended to be supplied by a LISTED Power Unit marked with “LPS”, “Limited Power Source”

and output rated + 5 V dc / 2.0 A.

• Do not use the vehicle power adapter in a high moisture environment. Never touch the vehicle power adapter

when your hands or feet are wet.

• Allow adequate ventilation around the vehicle power adapter when connected to the device. Do not cover

the vehicle power adapter with paper or other objects that will reduce cooling. Do not use the vehicle power

adapter while it is inside a carrying case.

• Connect the vehicle power adapter to a proper power source. The voltage requirements are found on the

product case and/or packaging.

• Do not use the vehicle power adapter if the cord becomes damaged.

• Do not attempt to service the unit. There are no serviceable parts inside. Replace the unit if it is damaged or

exposed to excess moisture.

Caring for your device

Taking good care of your device will ensure trouble-free operation and reduce the risk of damage.

• The device may feel warm to the touch during constant recording or when the vehicle is parked under

direct sunlight. This is normal operation for the device and does not affect the device’s performance.

• Keep your device away from excessive moisture and extreme temperatures.

• Do not place anything on top of your device or drop objects on your device.

• Do not drop your device or subject it to severe shock.

• Do not subject your device to sudden and severe temperature changes. This could cause moisture

condensation inside the unit, which could damage your device. In the event of moisture condensation,

allow the device to dry out completely before use.

• Never clean your device with it powered on. Use a soft, lint-free cloth to wipe the exterior of your device.

• Never attempt to disassemble, repair or make any modiﬁcations to your device. Disassembly, modiﬁcation

or any attempt at repair could cause damage to your device and even bodily injury or property damage and

will void any warranty.

• Do not store or carry ﬂammable liquids, gases or explosive materials in the same compartment as your

device, its parts or accessories.

• To discourage theft, do not leave the device and accessories in plain view in an unattended vehicle.

• Overheating may damage the device.

About GPS

• GPS is operated by the United States government, which is solely responsible for the performance of GPS.

Any change to the GPS system can affect the accuracy of all GPS equipment.

• GPS satellite signals cannot pass through solid materials (except glass). When you are inside a tunnel or

building, GPS positioning is not available. Signal reception can be affected by situations such as bad weather

or dense overhead obstacles (e.g. trees, tunnels, viaducts and tall buildings).

• The GPS positioning data is for reference only.

Important notice

In addition to the user manual, this document contains the following terms that apply to your use of your Navman

product:

1. Software licence;

2. Privacy notice; and

3. 2-year limited warranty.

Software licence

1. Generally.

Navman ("Licensor") is willing to grant the following licence (the "Licence") to use the software, if any, provided

with this Software Licence and Privacy Notice (whether provided separately or associated with a device) (the

"Licensed Product") to the original retail purchaser (and, subject to the limitations below, certain transferees) of

the Licensed Product or the device upon or with which the Licensed Product was installed or associated as of the

time of purchase (the "Customer") only if Customer accepts all of the terms of the Licence.

PLEASE READ THESE TERMS CAREFULLY. USING THE SOFTWARE WILL CONSTITUTE CUSTOMER'S

ACCEPTANCE OF THE TERMS AND CONDITIONS OF THIS LICENCE. PLEASE NOTE THAT THIS LICENCE IS

NOT ITSELF A LICENCE TO USE NAVIGATION DATA THAT MAY BE INCLUDED WITH A DEVICE. NAVIGATION

DATA IS COVERED BY A SEPARATE LICENCE AGREEMENT. IF YOU DO NOT AGREE TO THE TERMS OF THIS

LICENCE,

DO NOT INSTALL OR USE THE LICENSED PRODUCT. RATHER, RETURN THE LICENSED PRODUCT

(AND, IF YOU RECEIVED THE LICENSED PRODUCT INSTALLED ON A DEVICE, RETURN THE DEVICE)

PROMPTLY, INCLUDING ALL PACKAGING AND WRITTEN MATERIALS, TO LICENSOR AND LICENSOR WILL

REFUND TO CUSTOMER THE ORIGINAL RETAIL PRICE PAID FOR THE PRODUCT (LESS DELIVERY AND

HANDLING CHARGES, WHERE PERMITTED).

2. Licence Grant.

This section does not limit or affect the rights of any person under the Consumer Guarantees (as deﬁned in

section 7 below).

Licensor grants to Customer a non-exclusive licence (without right to transfer, assign, or sublicence except as

stated in this Licence) to use: (a) the Licensed Product (that term being further restricted where the Licensed

Product is, or contains, a work of authorship ﬁxed in tangible (including electronic) media to mean the single

purchased copy thereof); and (b) the accompanying materials, including any manuals contained in the Licensed

Product (the "Materials"), in accordance with the terms and conditions of this Licence.

3. Limitations on Use.

Customer will not place, secure, or use, or permit any other person to place, secure, or use, the Licensed

Product or any device associated with the Licensed Product, in a manner that limits any user or operator's view,

that is likely to distract any user or operator, or that may cause accidents, personal injury, or property damage.

Customer, and any user that Customer permits to use the Licensed Product or any associated device, is solely

responsible for observing safe driving, operating, and other practices so as to avoid accidents or injury to

persons or property. Certain functionality of the Licensed Product or the device may be dependent upon the use

of hardware (sometimes called a "dongle" or "module") or software keys that enable or unlock the functionality.

This Licence does not permit Customer to use any of such functionality unless Customer has also legitimately

bought or otherwise obtained the appropriate dongle, module, or software key. Each dongle, module, or

software key is intended solely to enable the portion of functionality of the Licensed Product or device described

in the documentation associated with the dongle, module, or software key and no other functionality.

4. Intellectual Property Rights.

As between Licensor and Customer, the copyright and all other intellectual property rights in the Licensed

Product and Materials (including any enhancements or modiﬁcations) are the property of Licensor. Customer

must not rent, lease, reproduce, translate, adapt, vary, reverse-engineer, or modify the Licensed Product or

Materials or communicate the same to any person other than in accordance with the terms of this Licence

(or to the extent permitted by mandatory laws). Customer may not rent or lend the Licensed Product, or

reproduce, prepare any derivative work, distribute, perform publicly, display publicly, perform by digital or other

transmission, or broadcast the Licensed Product. Any rights not expressly granted in this Licence are reserved by

Licensor.

5. Transfer of Licence.

Customer may transfer this Licence to a subsequent transferee of the Licensed Product or the device, if any,

upon which the Licensed Product is installed, provided that Customer transfers to the transferee all physical

embodiments of the Licensed Product, the device upon which the Licensed Product is installed, if any, and all of

the Materials, and retains no copy or part of the Licensed Product or the Materials.

Where the Licensed Product is transferred, technical support offered by the Licensor will only be available to the

transferee, if the transferee provides proof of the original purchase of the Licensed Product.

6. Copying.

Customer may not copy the Licensed Product or Materials except that one copy of any separate software

component of the Licensed Product may be made to the extent that such copying is necessary for Customer's

own backup purposes.

7. Liability.

7.1 Interpretation - Consumer Guarantees.

In this Software Licence and Privacy Notice:

(a) "Australian Consumer Law" has the meaning given to that term in section 4 of the Competition and

Consumer Act 2010 (Commonwealth of Australia);

(b) "Consumer" has the meaning given to that term in section 3 of the Australian Consumer Law, or section 2 of

the New Zealand Consumer Guarantees Act 1993, as the context requires;

(d) "PDH Goods or Services" means goods or services of a kind ordinarily acquired for personal, domestic or

household use or consumption.

7.2 Consumer Guarantees

Under the Australian Consumer Law (and other similar legislation of Australian states and territories) and the

New Zealand Consumer Guarantees Act 1993, certain statutory guarantees are conferred in relation to the

supply of goods or services to a Consumer ("Consumer Guarantees").

7.3 Limitation of Liability – Consumer Guarantees.

Where you as a Consumer acquire goods and services under this Licence from Licensor:

(a) subject to clause 7.4, in Australia or New Zealand, where the goods or services are PDH Goods or Services,

the operation of the applicable Consumer Guarantees cannot be, and are not in this Licence, excluded, restricted

or modiﬁed; or

(b) in Australia (or if Consumer Guarantees are otherwise conferred in relation to goods and services by

Australian law), where the goods or services are not PDH Goods or Services, Licensor limits its liability for a

failure to comply with any Consumer Guarantee (other than where to do so would otherwise cause all or part of

this clause to be void) to (at Licensor's option): (i) in the case of goods, repairing or replacing the goods or paying

the cost of having the goods repaired or replaced; and (ii) in the case of services, re-supplying the services or

paying the cost of having the services re-supplied, and Licensor does not exclude or limit the operation of the

Consumer Guarantees under any other provision of this Licence or in any other manner and you agree it is fair

and reasonable in all the circumstances for Licensor's liability to be so limited.

To the extent permitted by law and except for the Consumer Guarantees, Licensor excludes from this Licence

all representations, guarantees, conditions, warranties, rights, remedies, liabilities and other terms that may be

conferred or implied by statute, general law or custom, in fact or otherwise, except any guarantee, implied term

or right conferred under any legislation (including the Australian Consumer Law and the New Zealand Consumer

Guarantees Act 1993), the exclusion of which would contravene legislation or cause part or all of this clause to

be void.

7.4 Business Supplies in New Zealand

In New Zealand, where both Licensor and Customer are ‘in trade’ and Customer is acquiring the goods and

services for the purposes of a business, then both Licensor and Customer acknowledge and agree that the

statutory guarantees and implied terms, covenants and conditions contained in the New Zealand Consumer

Guarantees Act 1993 are excluded to the fullest extent permitted by law and do not apply, and Licensor does

not exclude or limit the operation of the Consumer Guarantees under any other provision of this Licence or in

any other manner and you agree it is fair and reasonable in all the circumstances for Licensor's liability to be so

limited.

7.5 Limitation of Liability – General.

To the extent permitted by law and except for any liability under the Consumer Guarantees: (a) the Licensor will

not, under any circumstances, be liable under the law of tort, contract, or otherwise for any loss of proﬁts or loss

of data or any indirect or consequential loss or damage, however caused, arising out of or in connection with this

Licence; (b) the Licensor's aggregate liability for all claims arising out of or in connection with this Licence will be

limited to the total amount actually and originally paid at retail by the customer for the Licensed Product; and (c)

without limiting the foregoing or any other limitation of liability or disclaimer contained in this Software Licence

and Privacy Notice, all limitations and disclaimers contained in the product warranty or any limited warranty for

any product sold in connection with the Licensed Product also apply to this Licence.

8. Termination.

Licensor may, in addition to any other remedies available to Licensor, terminate this Licence immediately if

Customer breaches any of its obligations under this Licence.

9. Product warranty.

The warranty for the Licensed Product is set out in the warranty documentation provided with the Licensed

Product or the device on which the Licensed Product is installed (subject to any exclusions and limitations set out

in this document), and applies in addition to this Licence and to any rights that you have under the Consumer

Guarantees.

RMA number (compulsory - please call the support number above for your RMA number).

If an RMA is not obtained before sending the unit in for repair, the unit will be quarantined and this will add to the

repair turnaround time by at least one week.

You must pay for shipping and any insurance to get the product to Navman at the applicable address. Except

where otherwise provided by Consumer Guarantees (as deﬁned below), you assume all risk of loss or damage

to the product until it arrives at Navman's facility. Navman will pay for ground shipping of the new or repaired

product back to you at an address in the same country as the repair facility and assume all risk of loss or damage

to the product until it arrives at the address you specify. You must request, and pay for, any different shipping

method. The repair of the product may result in loss of data. Navman will not be responsible for the loss or

alteration of any user data stored in the product. You should back up or otherwise preserve any such data before

sending the product to Navman. Except where otherwise required by Consumer Guarantees (as deﬁned below

in this document), if Navman reasonably determines that the product has not failed to meet the standards of the

warranty, you will be liable for the cost of return shipment to you, Navman may require payment of such costs

before returning the product to you, and the risk of loss or damage will remain with you notwithstanding Navman's

possession of the product. The Warranty Period will stop running on the day you send the product to Navman. The

remainder of the Warranty Period will begin to run again when the repaired or replacement product arrives at the

address you specify.

5. Applicable Law.

Where the product was acquired by the original retail purchaser in Australia, this limited warranty is governed by

the laws of New South Wales. Where the product was acquired by the original retail purchaser in New Zealand, this

limited warranty is governed by the laws of New Zealand.

6. Consumer Guarantees

6.1 Interpretation.

In this 2-year limited warranty:

(a) "Australian Consumer Law" has the meaning given to that term in section 4 of the Competition and Consumer

Act 2010 (Commonwealth of Australia);

(b) "Consumer" has the meaning given to that term in section 3 of the Australian Consumer Law, or section 2 of the

New Zealand Consumer Guarantees Act 1993, as the context requires;

(d) "PDH Goods or Services" means goods or services of a kind ordinarily acquired for personal, domestic or

household use or consumption.

6.2 Consumer Guarantees

Under the Australian Consumer Law (and other similar legislation of Australian states and territories) and the New

Zealand Consumer Guarantees Act 1993, certain statutory guarantees are conferred in relation to the supply of

goods or services to a Consumer (Consumer Guarantees).

In addition to the warranty, you may also have other rights under the Consumer Guarantees which cannot be

excluded, restricted or modiﬁed by agreement. This warranty does not exclude, restrict or modify the application

of any condition, warranty, guarantee, right or remedy conferred by or implied under any provision of any statute

where to do so would: (a) contravene that statute or (b) cause any part of this clause to be void.

Where you as a Consumer acquire goods and services to which this warranty relates:

(a) subject to clause 6.3, in Australia or New Zealand, where the goods or services are PDH Goods or Services, the

operation of the applicable Consumer Guarantees cannot be, and are not in this warranty, excluded, restricted

or modiﬁed; or

(b) in Australia (or if Consumer Guarantees are otherwise conferred in relation to those goods and services by

Australian law), where the goods or services are not PDH Goods or Services, Navman limits its liability for a

failure to comply with any Consumer Guarantee (other than where to do so would otherwise cause all or part

of this clause to be void) to (at Navman's option): (i) in the case of goods, repairing or replacing the goods

or paying the cost of having the goods repaired or replaced; and (ii) in the case of services, re-supplying the

Turning the dash cam on

Complete the installation according to the instructions in the “Using your dash cam in a vehicle” section. Once

the vehicle engine is started, the dash cam automatically turns on.

Shutting down the dash cam

Occasionally you may need to perform a hardware reset when the dash

cam stops responding or if it appears to be “frozen” or unresponsive.

To shut down the dash cam, press and hold the Power button until the

system powers off.

If the system does not shut down by keeping the Power button pressed,

you can force it to shut down by inserting a small rod (such as a straightened

paper clip) into the Shutdown button of the device.

Setting the date and time

To make sure that the date and time of your recordings are correct, use the Navman MiVue Pro app to check the

settings before you begin recording.

1. Turn the dash cam on.

2. Open the Navman MiVue Pro app on the connected smartphone.

3. Tap > > Settings Date / Time.

4. Do one of the following:

Select Manual, and the system will update its date and time settings by synchronising them with the

connected smartphone.

Select GPS, and set the and options according to your location. When Time Zone Daylight Saving Time

done, the system will set date and time automatically.

Recording in driving mode

Continuous recording

The system will automatically begin continuous recording shortly after start-up.

The recording may be divided into several video clips; recording will not stop between video clips. When

your memory card ﬁlls up with continuous recordings in the "Normal" category, it will automatically record

over the oldest existing ﬁles in this category (in this case, there may be a few seconds of no recording whilst

the memory card is processing).

Event recording

If an event happens such as a sudden impact, high speed driving, an aggressive turn or an accidental crash

during continuous recording, the G sensor will prompt the dash cam to start recording the event.

The event recording will continue for 20 seconds to save the duration from 5 seconds before the event

until 15 seconds after the event. The event recording can last up to 1 minute if the sensor is triggered again

during the recording. When your memory card ﬁlls up with event recordings in the "Event" category, it will

automatically record over the oldest existing ﬁles in this category.

If you want to manually start an event recording while continuous recording is in progress, press the Event button

brieﬂy.

Note: You can change the sensitivity level of the G sensor via the Navman MiVue Pro app.

Parking mode

Note: It requires an additional power source to record the video during the Parking mode, such as an

uninterruptible power cable or PowerBox accessory which is sold separately. Visit www.navman.com.au /

www.navman.co.nz to purchase this accessory.

The Parking mode function is disabled by default. To enable the function, open the Navman MiVue Pro app on the

connected smartphone and then select > > Settings Parking mode > Detection > On.

When the Parking mode detection is enabled, the system will enter the Parking mode when the car stops moving

for about 5 minutes. In the Parking mode, parking recordings could be triggered only when motion or vibration are

detected.

Note: The feature is triggered by the G sensor and motion detection of the device. You can change the setting

via the Navman MiVue Pro app.

The parking recording will continue for 20 seconds to save the duration from 5 seconds before the event until 15

seconds after the event. The parking recording can last up to 1 minute if the sensor is triggered again during the

recording.

The system will exit the Parking mode when more than 5 seconds of continuous vibration is detected (for example,

when the car starts moving).

System settings

Open the Navman MiVue Pro app on the connected smartphone. Tap > to customise the system Settings

settings of the dash cam.

Video Recording

• Video Clip Length: 1 MIN Sets the length of each video clip for a continuous recording ( , 3 MIN 5 MIN or ).

• Frequency: Sets the frequency for the camera to avoid problems caused by artiﬁcial light sources that are not

constant.

• WDR: Enables the Wide Dynamic Range (WDR) function to improve the dash cam's image quality under high-

contrast lighting conditions.

• EV: -1 +1Sets the exposure level ( – ) to adjust the brightness of the image.

• G-Sensor: Sets the sensitivity level of the G sensor that allows automatic triggering of event recording while

continuous recording is in progress.

• Stamps: COORDINATE GSENSORSets the information ( or ) that will be displayed on the recorded video.

• Speed stamp: Displays the driving speed on the recorded video.

Driving Safety

Note: Not all MiVue dash cam models support all of the driving safety features.

The dash cam provides advanced driving safety functions to make your driving safer.

• Calibration: You are advised to calibrate the system constantly in order to be alerted properly. Follow the steps

to calibrate the system.

1. Drive the vehicle in the middle of the lane.

2. Ask a passenger to select this option and then follow the on-screen instructions to complete calibration.

• LDWS: The system will alert you when it detects that the car speed is over 60 km/h and the car has strayed

from its intended lane.

• FCWS: The system will alert you when the car moves slowly and gets too close to the car ahead.

• Headlight Reminder: The system will remind you to turn the lights on when you are driving after dark.

• Fatigue Alert: 2 hoursThe system will remind you to take a break for a long-distance drive ( , 3 hours or

4 hours).

• Stop and GO: The system will alert you when the car ahead has proceeded to go after being stopped for longer

than 10 seconds.

Parking Mode

• Detection: When enabled, the dash cam will automatically enters the Parking mode when the car stops moving

for about 5 minutes.

• Security LED Indicator: Turns on or off the Parking indicator in the Parking mode.

• GSENSOR MOTIONDetection Method: Sets the detection method ( , or ) to start parking recording BOTH

when the system detects motion or if an event happens in the Parking mode.

• G-Sensor Sensitivity: Sets the sensitivity level of the G sensor that allows automatic triggering of the parking

recording when the dash cam is in the Parking mode.

• Low Medium HigMotion Detection: Sets the sensitivity level of motion detection to , or h.

System

• Date / Time: Sets the system date and time.

• Volume: Adjusts the volume level.

• Distance Unit: Sets the preferred distance unit.

• Format SD Card: Formats a memory card. (All data will be erased.)

• Restore to Defaults: Restores the system settings to the factory defaults.

MiVue Manager

MiVue Manager™ is a tool for you to view the videos recorded on a MiVue™ dash cam.

Note: Not all features are available for every model.

Installing MiVue Manager

Download the Setup ﬁle from https://www.navman.com.au/mapping/ or https://www.navman.co.nz/

mapping/ for your Windows or Mac. Double-click Setup.exe and follow the on-screen prompts to install MiVue

Manager.

IMPORTANT! You may be prompted to install the MOV and AVI codecs for video playback if they are missing on

your computer. Search online to install the required codecs.

Playing the recording ﬁles

1. Remove the memory card from the dash cam and access the card on the computer via a card reader; or

connect the dash cam to your computer via a USB cable (not supplied). You are advised to copy the recording

ﬁles to your computer for backup and playback.

2. Start MiVue Manager on the computer.

• By default, MiVue Manager shows the calendar and the ﬁle list on the right.

• When a recording ﬁle exists, you will see the date marked with “ ”. Click that date to display the ﬁles that

were recorded on that date.

• You can choose the ﬁle type to display: / / .Event Normal Parking

• To display all ﬁles in the current folder, click . To return to the calendar view, click .All Calendar

Note: Your model may not support all ﬁle types.

3. Double-click the desired ﬁle on the ﬁle list to start playback.

4. The playback controls are described as follows:

1 2 3 4 5 6 7

1 Skips to the previous/next ﬁle on the list.

2 Starts or pauses the playback.

3 Changes the playback speed to 1/4x, 1/2x, 1x (default), 1.5x, or 2x.

4 Mutes or unmutes the volume.

5 Adjusts the volume level.

6 Plays the video in full screen.

7 Displays the playback progress. You can click on a point along the track bar to move directly to a

different location for the playback.

5. During playback, you can check more driving information from the dashboard panel and the G sensor chart

that are displayed below the video playback screen.

• On the dashboard panel, click to display the map screen.

Note: The map screen may not display when the computer is not connected to the Internet or when

your MiVue model does not support the GPS function.

• G sensor chart displays data in 3-axis waveform about the car’s shift forward/backward (X), to the right/

left (Y) and upward/downward (Z).

6. The tool bar allows you to do the following:

1 2 3 4 5 6 87

1 Selects the folder that stores the recording ﬁles.

2 Previews and prints the current video image.

3 Saves the selected ﬁles to the speciﬁed location on your computer.

4 Captures and saves the current video image to the speciﬁed location on your computer.

5 Opens the Settings Menu. The Settings items are described as follows:

• Change Language: Sets the display language of MiVue Manager.

• Change Skin: Sets the colour scheme of MiVue Manager.

• Check for Update: Checks if there is any new version of MiVue Manager. Internet access is

required for this feature.

• About: Displays the version and copyright information of MiVue Manager.

6 Exports the GPS information of the selected ﬁle in the KML format to the speciﬁed location on your

computer.

7 Uploads the selected ﬁle to YouTube™.

8 In the playlist, the "F" and "R" marks displayed on the ﬁlename indicate that the video comes with a

corresponding front video (F) or rear video (R). While playing the video, the screen displays the PIP

(picture-in-picture) mode. You can switch the front and rear videos by clicking .

Note: This feature is for selected models only.

3. When adjusting the lens angle, make sure that the camera’s view is parallel with the level ground and the

ground/sky ratio is close to 6/4. You can check the camera's live view via the Navman MiVue Pro app ( >

LIVE ).

Loose the adjustment bolt on the camera's mount ( 1), tilt the camera upwards and downwards for the

optimal lens angle ( 2), and then lock the camera by fastening the adjustment bolt ( 3).

1 3

2MiVue Pro app > Live View

Mounting the rear recording camera

Depending on your model, your device may support a rear recording camera (may be sold separately).

For more information on using the rear recording camera, see the provided documentation in its package.

Using a memory card

You must insert a memory card before you can start recording. The

dash cam supports Class 10 UHS-1 memory cards with 16 GB – 128 GB

capacity.

Hold the card by the edges and gently insert it into the slot as shown in

the illustration.

To remove a card, gently push the top edge of the card inwards to release

it and pull it out of the slot.

Formatting a card

To format a memory card, do one of the following:

Use the Navman MiVue Pro app to format a memory card ( > > Settings Format SD Card).

On your dash cam, press the WIFI/Mute button 4 times consecutively.

Note:

DO NOT apply pressure to the centre of the memory card.

Navman does not guarantee the product’s compatibility with memory cards from all manufacturers.

Please check your card manufacturer's speciﬁcations and warranty to ensure it is suitable for use in dash

cameras and loop recording devices.

Before you start recording, please format the memory card via the Navman MiVue Pro App to avoid

malfunction caused by ﬁles not created by the dash cam.

If the REC indicator of the device glows in red, format your SD card. If the problem persists, insert another

SD card.

You may need to format your memory card periodically to ensure it remains in good condition to record

and save ﬁles.

You are advised to turn the device off before removing the memory card.

Getting to know your dash cam

10 11

53 4 6 7

1 System indicators

(WIFI/REC/MUTE)

2 Device mount

3 Shutdown button

4 Memory card slot

5 Power/Event button

6 WIFI/Mute button

7 Microphone

8 Camera lens

9 Speaker

Parking indicator

Mini-USB connector

The buttons

Power/Event button

• When the dash cam is connected to the power source, press the button brieﬂy to turn it on.

• When the dash cam is powered on, press the button brieﬂy to start an event recording.

• When the dash cam is powered on, press and hold the button for 5 seconds to turn it off.

WIFI/Mute button

• Press the button brieﬂy to mute or unmute the microphone during recording.

• Press and hold the button for 5 seconds to turn the WIFI mode on or off.

• Press the button 4 times consecutively to format the SD card.

The indicators

WIFI indicator (blue)

• Glows in when the WIFI mode is turned on.blue

• Flashes in when the dash cam is connected to the smartphone.blue

REC indicator (green/red)

• Glows in when the recording is in progress.green

• Flashes in when an event recording is in progress.green

• Glows in when there is an error with the memory card and recording has stopped.red

• Flashes in when the memory card is being formatted or an over-the-air (OTA) update is in progress.red

MUTE indicator (amber)

• Glows in to indicate the microphone is muted during recording.amber

Parking indicator (white)

• Glows in when the system enters the Parking mode.white

2. Connect the cables. Route the cable through the top ceiling and the A-pillar so that it does not interfere with

driving. Make sure that the cable installation does not interfere with the vehicle's airbags or other safety

features.

Depending on your model, you may have different accessories to connect the dash cam to the power source.

• Connect the dash cam to the cigarette lighter using the vehicle power adapter.

• Connect the dash cam to the fuse box using the PowerBox.

a. Locate and open the fuse box inside of the vehicle ( 1).

b. Connect the fuse and ground wire (2). Check and conﬁrm the

vehicle's voltage by using the electrical tester as battery voltages

vary by vehicle.

If your dash cam supports the Parking mode: Use the electrical

tester to locate the fuse from which the power is supplied even

when the vehicle is turned off, such as the emergency ﬂashing

hazard lights, interior and door lights, etc. Connect the red wire

to the fuse (B+).

If your dash cam does not support the Parking mode: Use the

electrical tester to locate the fuse from which the power is not

supplied when the vehicle is turned off, such as the indicator

lights. Connect the red wire to the fuse (ACC).

The black wire (GND) must be connected to the metal part of the vehicle for grounding. If not grounded,

this product may not work properly. You can use a screw to attach the black wire to the vehicle (try to ﬁnd

a screw hole on any metal part).

c. Connect the PowerBox to the dash cam ( 3) and conﬁrm it is working properly by the LED indicator that

glows in green.

• Connect the dash cam to the fuse box using the Smart Box II (sold separately). For more information on

installing and using the Smart Box II, see the documentation that comes with the product.

Note: The installation illustrations are for your reference only. If you use the PowerBox or Smart Box II, the

placement of the fuse box may vary depending on the vehicle model. It is recommended that you contact a

skilled installer (for example, the service personnel of the vehicle) for installation and assistance.

Updating your dash cam

Occasionally, Navman may offer you various software updates (such as the device ﬁrmware or voice data). The

updates are installed via OTA updates of the Navman MiVue Pro app. When an update is available, you will be

prompted when you open the app. Follow the on-screen instructions to complete the update.

Using your dash cam in a vehicle

Precautions and notices

• Do not operate the controls of the product while driving. Using this product does not change the requirement

for a driver to take full responsibility for his or her behavior. This responsibility includes observing all trafﬁc

rules and regulations in order to avoid accidents, personal injury or property damage.

• A window mount is needed when using the dash cam in a car. Make sure that you place the dash cam in an

appropriate place, so as not to obstruct the driver’s view or deployment of airbags.

• Make sure that no object is blocking the camera lens and no reﬂective material appears near the lens. Please

keep the lens clean.

• If the car’s windscreen is tinted with a coating, it may impact the recording quality.

• To ensure the highest quality recordings, you are advised to place the dash cam near the rear-view mirror.

• Select an appropriate location for mounting the device in a vehicle. Never place the device where the driver’s

ﬁeld of vision is blocked.

• If the car’s windscreen is tinted with a reﬂective coating, it may be athermic and impact the GPS reception. In

this instance, please mount your device where there is a “clear area.”

• The system will automatically calibrate the G sensor of the device during start-up. To avoid G sensor

malfunction, always turn the device on AFTER you mount it in the vehicle properly.

Mounting the dash cam

1. Make sure that your car is parked on level ground. Follow the instructions to securely mount your dash cam into

a vehicle.

Note:

l Before sticking the mounting pad, it is recommended to clean the windscreen with rubbing alcohol.

l If the adhesion of the adhesive tape does not perform well, replace the tape with a new one.

Navman MiVue Pro app

The Navman MiVue Pro app allows you to view, share and back up the videos recorded on a MiVue dash cam via

WIFI. Search for "Navman MiVue Pro" in Apple App Store or in Google Play Store to download the app for free.

Note:

l The Navman MiVue Pro app is compatible with iOS 9.0 (and above) and Android 5.0 (and above) devices.

Navman does not guarantee the product’s compatibility with smartphones from all manufacturers.

l Not all MiVue dash cam models support the Navman MiVue Pro app or all its features.

Setting up a WIFI connection

On your dash cam, press and hold the WIFI button for 5 seconds to enable the WIFI mode. The WIFI indicator

glows in blue when the WIFI mode is enabled.

Follow the steps to set up the WIFI connection between the dash cam and the smartphone via the Navman MiVue

Pro app.

1. Make sure that you have enabled the WIFI function on the smartphone.

2. Open the Navman MiVue Pro app and tap the "+" icon.

3. Tap Select WIFI and then select the dash cam you want to connect to.

4. Tap Done to complete the WIFI connection.

Note:

l The screenshots and instructions about operating the app are for reference only. The actual setting options

and methods may vary depending on the software version and your smartphone type/model.

l If you encounter any problems while connecting the devices, reset the WIFI mode of the dash cam. If the

problem persists, contact Navman Customer Support or visit www.navman.com.au / www.navman.co.nz

for further assistance.

Using the Navman MiVue Pro app

Once the devices are connected, the screen will display the main page ( ).

l Tap LIVE to watch the live video of the connected dash cam.

l Tap Settings to settings for the dash cam. change the

Note: The video resolution of the dash cam will be restored to the default setting

automatically while the dash cam is connected to your smartphone. Once the two

devices are disconnected, the video resolution will be changed back to its current

setting automatically.

Tap SD card to access the video list to download or delete the recordings on the dash cam.

l Tap Info to display the information of the dash cam.

l Tap to connect a new dash cam.

l Tap to view the downloaded recordings.

l Tap to change the storage location of the downloaded recordings (for Android users

only), update the ﬁrmware and view the information of the app.

R3R4

R5R6

PowerBox

Produktspezifikationen

Marke:	Navman
Kategorie:	Dashcam
Modell:	MiVue Stealth

Brauchst du Hilfe?

Wenn Sie Hilfe mit Navman MiVue Stealth benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Dashcam Navman

Navman MiVue WORKMATE XDC Bedienungsanleitung

21 August 2024

Navman MiVue ALTA Bedienungsanleitung

21 August 2024

Navman MiVue ALTA DC Bedienungsanleitung

19 August 2024

Navman FOCUS450 Dual Bedienungsanleitung

14 August 2024

Navman MiVue Stealth Bedienungsanleitung

27 Juli 2024

Navman MiVue Speedocam DC Bedienungsanleitung

25 Juli 2024

Navman MiVue 700 Bedienungsanleitung

9 Juli 2024

Navman MiVue 750 Bedienungsanleitung

10 März 2024

Bedienungsanleitung Dashcam

Neueste Bedienungsanleitung für -Kategorien-

JVC KV-DR305W Bedienungsanleitung

16 Oktober 2024

Blaupunkt BP 3.1A Bedienungsanleitung

15 Oktober 2024

Uniden Dash View 50R Bedienungsanleitung

9 Oktober 2024

Cobra SC200 Bedienungsanleitung

4 Oktober 2024

Caliber CAM701 Bedienungsanleitung

3 Oktober 2024

Alpine KCX-C250MC Bedienungsanleitung

30 September 2024

Swann SWADS-130DCM Bedienungsanleitung

27 September 2024

Midland Bike Guardian Bedienungsanleitung

27 September 2024

Kenwood DRV-A610W Bedienungsanleitung

24 September 2024

Alpine KCX-C200B Bedienungsanleitung

22 September 2024