NAV-TV NTV-KIT630 Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für NAV-TV NTV-KIT630 (12 Seiten) in der Kategorie Dashcam. Dieser Bedienungsanleitung war für 29 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/12
GM UNI-CAM/UNI-CAM PRG
RVC for select GM vehicles equipped with MyLink IOH Radio controller interface &/or programmer
IOH = IO4 (4” screen) & IO5/IO6 (8” screen)
NTV-KIT629: Controller ONLY (for vehicles with OEM RVC)
NTV-KIT630: Controller & Programmer (for vehicles without OEM RVC)
BHM
09 26/ /17
NTV-DOC239
3950 NW 120th Ave, Coral Springs, FL 33065 TEL 561-955-9770 FAX 561-955-9760
BHM
09/26/17
NTV-DOC239
Agreement End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for misuse of its product. :
If you do not agree, please discontinue use immediately and return product to place of purchase. This product is intended for off-road use and passenger
entertainment only.
2 | P a g e
Overview
The GM UNI-CAM adds an addional video input on select GM vehicles equipped with the MyLink (model IOH)
4 color media screens Forcing (aermarket) AUX Video or front camera to display at any me is ” and 8” .
acvated with wire triggers. Note: NTV-KIT629 is a controller only, it will NOT program the MyLink radio
system for rear camera. If adding a reverse camera to a vehicle without OEM RVC and forced cam/AUX video
input is desired as well, you must purchase NTV-KIT630 (UNI-CAM with built-in programmer).
Kit Content
GM UNI-CAM Pinout
Pin #
Descripon
Color
1
12v Constant Power (+)
Yellow
2
Input 1 (Force Rear Cam) *
Red
3
Input 2 (Force Front Cam)
Blue
4
Input 3 ( Programming Wire) 4” **
Pink
5
--NOT USED --
Brown
6
RCA Signal (+) (Out to radio)
Yellow
7
RCA Shield (common)
Gray
8
CAN HI (HMI side)
White/Blue
9
CAN LO (vehicle side)
White/Brown
10
Ground (-)
Black
11
Output 1 (ACC 12v +)
White/Red
12
Output 2 (REV + & ) 12v FRVC
White/Blue
13
Output 3 (12v out when ) + FFVC
White/Purple
14
-- --Not Used
White/Brown
15
RCA Signal (+) Input (front cam)
White
16
RCA Signal (+) Input (rear cam)
Red
17
CAN HI (HMI side)
Blue
18
CAN LO (vehicle side)
Brown
Wire Side
Any wires not menoned here are not used for
this installaon.
GM UNI-CAM Module
KIT629: NTV-ASY166
KIT630: NTV-ASY245
USB Cable
(updates)
NTV-CAB009
*Forcing rear camera is only available for
aermarket cameras (unless OEM rear camera
is powered with an ACC source or OUTPUT 2
manually OEM RVC normally only powered in –
reverse)
**Used for (IO4) 4” screens ONLY.
Plug & Play I/O T-Harness
NTV-HAR284
CAM T-Harness
NTV-HAR283
VSW-R included with
NTV-KIT629
PIN 12 Forced Rear View Camera FRVC: ‘ ’
PIN 13 FFVC: ‘Forced Front View Camera’
BHM
09/26/17
NTV-DOC239
Agreement End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for misuse of its product. :
If you do not agree, please discontinue use immediately and return product to place of purchase. This product is intended for off-road use and passenger
entertainment only.
3 | P a g e
Known HMI
Locaons:
GM UNI-CAM Installaon
1. Aer gaining access to the HMI module, Disconnect the gray, 12-pin plug from the OEM HMI circled
above.
2. Disconnect the black, 16-pin plug from the OEM HMI circled above.
3. 12 Connect the provided UNI-CAM -pin & 16-pin (male end) connectors into the HMI plug locaons
from steps 1 & 2.
4. Connect the factory 12-pin & 16-pin plugs (previously connected to the HMI) into the provided Plug &
Play T-Harness (female end).
5. NTV-KIT629 Installaon (with exisng OEM reverse camera):
a. When connecng a front camera (or AUX video source) to a vehicle with an exisng OEM
reverse camera, the internal relay on the UNI-CAM board is not used (RCA I/Os from module).
Complete all connecons on page 5 (FIG 2) using the included VSW-R (included with KIT629) to
prevent ‘bleed er’ image (when in front camera mode). This includes the following:-ov
b. Black wire of VSW to chassis ground
c. OUTPUT 3 (from module) to White/Red of VSW
d. RCA connecons as shown in diagram (FIG 2)
e. Connue with installaon on page 4, step 7.
6. NTV-KIT630 Installaon (without exisng OEM reverse camera):
a. Adding a single rear camera: power your camera with an ACC source or OUTPUT 1 (especially if
using the forced feature), and connect your camera signal directly to the female RCA (into the
HMI) from the 12-pin gray plug.
b. Adding 2 aermarket cameras: Instead of connecng camera signal directly to the HMI,
connect the RVC signal to the RCA labeled at the UNI-CAM module. Connect the ‘BACKUP CAM’
front cam/AUX video to the RCA labeled . Connect the (male) RCA to ‘FRONT CAM’ ‘VIDEO OUT’
the female RCA from the (at the HMI). Leave the male RCA on the CAM T-CAM T-Harness
Harness disconnected .
c. If this vehicle is equipped with a 4” screen, connect INPUT 3 (pink) to a CONSTANT 12v source.
d. Connue with installaon on step 7 (next page).
Vehicle
HMI Locaon
Cadillac ATS/CTS
Directly below glove box
Cadillac SRX
Below/behind glove box
Corvee
Driver’s kick panel
Silverado/Sierra
Behind glove box - high
Colorado/Canyon
Behind Screen - low
Factory GM HMI (Human Machine Interface)
The UNI-CAM kit connects at the OEM
HMI Module. The locaon of this module
varies by vehicle.
NOTE: If this wire is not connected, the UNI- (image will appear zoomed in) CAM PRG will program for 8” screen .
Produktspezifikationen
| Marke: | NAV-TV |
| Kategorie: | Dashcam |
| Modell: | NTV-KIT630 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit NAV-TV NTV-KIT630 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Dashcam NAV-TV
11 Juli 2024
30 April 2023
30 April 2023
30 April 2023
30 April 2023
30 April 2023
30 April 2023
30 April 2023
30 April 2023
30 April 2023
Bedienungsanleitung Dashcam
- Dashcam Gembird
- Dashcam Genius
- Dashcam Hama
- Dashcam HP
- Dashcam Nedis
- Dashcam Niceboy
- Dashcam Philips
- Dashcam AEG
- Dashcam Dymond
- Dashcam Maginon
- Dashcam Technaxx
- Dashcam Denver
- Dashcam König
- Dashcam Trevi
- Dashcam Blaupunkt
- Dashcam Kenwood
- Dashcam Trebs
- Dashcam Dometic
- Dashcam Pyle
- Dashcam Salora
- Dashcam Aiptek
- Dashcam Caliber
- Dashcam Pioneer
- Dashcam JVC
- Dashcam Motorola
- Dashcam Xiaomi
- Dashcam Elro
- Dashcam Ferguson
- Dashcam Garmin
- Dashcam GOCLEVER
- Dashcam Lamax
- Dashcam Mio
- Dashcam Sencor
- Dashcam Waeco
- Dashcam Scosche
- Dashcam XOMAX
- Dashcam Guardo
- Dashcam Midland
- Dashcam Alpine
- Dashcam Minolta
- Dashcam Rollei
- Dashcam EUFAB
- Dashcam Pro User
- Dashcam Toyota
- Dashcam ADATA
- Dashcam Overmax
- Dashcam Monacor
- Dashcam Ednet
- Dashcam Osram
- Dashcam NextBase
- Dashcam Uniden
- Dashcam Clarion
- Dashcam Kogan
- Dashcam Jobo
- Dashcam Skytronic
- Dashcam Audiovox
- Dashcam Navitel
- Dashcam Navman
- Dashcam Cobra
- Dashcam CamOne
- Dashcam EVOLVEO
- Dashcam TrueCam
- Dashcam ION
- Dashcam DNT
- Dashcam Swann
- Dashcam Xblitz
- Dashcam Prestigio
- Dashcam Tracer
- Dashcam Boss
- Dashcam Mini
- Dashcam Hertz
- Dashcam Hikvision
- Dashcam Jensen
- Dashcam Transcend
- Dashcam DOD
- Dashcam Innovv
- Dashcam IRoad
- Dashcam Laser
- Dashcam Lidl
- Dashcam Media-tech
- Dashcam Naxa
- Dashcam Nordval
- Dashcam Roadeyes
- Dashcam Steren
- Dashcam Thinkware
- Dashcam Veho
- Dashcam Metra
- Dashcam ModeCom
- Dashcam CRUX
- Dashcam Escort
- Dashcam Brigmton
- Dashcam Kaiser Baas
- Dashcam KJB Security Products
- Dashcam BlackVue
- Dashcam Valueline
- Dashcam Braun Phototechnik
- Dashcam BLOW
- Dashcam Boyo
- Dashcam Cowon
- Dashcam Rexing
- Dashcam Dashmate
- Dashcam EchoMaster
- Dashcam AZDome
- Dashcam Carmera
- Dashcam VIOFO
- Dashcam Mobileye
- Dashcam Kapture
- Dashcam ProUser
- Dashcam Nanocam+
- Dashcam Vicovation
- Dashcam Andatech
- Dashcam RIPOON
Neueste Bedienungsanleitung für -Kategorien-
16 Oktober 2024
15 Oktober 2024
9 Oktober 2024
4 Oktober 2024
3 Oktober 2024
30 September 2024
27 September 2024
27 September 2024
24 September 2024
22 September 2024