NAV-TV My Touch NTV-KIT616 Bedienungsanleitung

NAV-TV Nicht kategorisiert My Touch NTV-KIT616

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr NAV-TV My Touch NTV-KIT616 (4 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂĽr 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
MY TOUCH VIM V2
VIM & CIM for select Ford vehicles with 8.4” My Touch
NTV-KIT 616
BHM
10 07/ /15
NTV-DOC 231
3950 NW 120th
Ave, Coral Springs, FL 33065 TEL 561-955-9770 FAX 561-955-9760
BHM
10/07/15
NTV-DOC231
Agreement End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for misuse of its product. :
If you do not agree, please discontinue use immediately and return product to place of purchase. This product is intended for off-road use and passenger
entertainment only.
2 | P a g e
Overview
The My Touch VIM V2 Kit enables viewing of DVD/IPOD video/AV input while in moon, as well as navigaon
desnaon input for select 2011+ Ford vehicles equipped with the 8.4” My Ford Touch media system.
Acvang Video in Moon/NAV Control in Moon is performed from wire trigger or factory dash buons for
select vehicles.
Kit Content
MY TOUCH VIM V2 Pinouts
Pin #
Descripon
Color
1
12v (+) Constant Power
Yellow
2
-- --Not Used (LIN)
White/Orange
3
-- --Not Used (LIN)
Orange
4
CAN ( ) HI (radio side) 125k
Green
5
CAN (125k) HI (vehicle side)
G ray
6
CAN (500k) HI (radio side )
Purple/Black
7
CAN (500k) HI (vehicle side)
White/Black
8
DIFF VID (radio side)
White/Blue
9
DIFF VID (vehicle side)
White/Orange
10
Ground (-)
Black
11
-- --Not Used
Blue
12
INPUT 1 (+) VIM Acvaon
Red
13
CAN (125k) LO (radio side)
Green/Black
14
CAN (125k) LO (vehicle side)
Gray/Black
15
CAN (500k) LO (radio side)
Purple
16
CAN (500k) LO (vehicle side)
White
17
DIFF VID (radio side)
Blue
18
DIFF VID (vehicle side)
Orange
VIM V2 Module
NTV-ASY232
USB Cable (updates)
NTV-CAB009
Wire Side View
Any wires not menoned here are not used
for this install.
BHM
10/07/15
NTV-DOC231
Agreement End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for misuse of its product. :
If you do not agree, please discontinue use immediately and return product to place of purchase. This product is intended for off-road use and passenger
entertainment only.
3 | P a g e
Installaon with radio removal (Edge)
1. Using a plasc pry tool, gently pry up side trim panel that run the length of
the radio bezel and center console.
2. Once removed, there will be t20 Torx screws holding the shiî…´er plate and
radio bezel in place. Remove these screws.
3. Place the vehicle in Drive or lower. Pry up the shift plate and move back.
4. With the shiî…´ plate moved the radio bezel will easily come out. Disconnect all
wiring aached to the bezel.
5. Remove the (4x) 7mm screws holding the screen in place.
6. Disconnect all wiring and set the screen aside.
7. Gather the Plug & Play harness from the V V2 kit and connect the main IM
OEM LCD harness (male) from the car into the female side of the
provided Plug & Play T-Harness.
8. Connect the VIM V2 module to the 18-PIN connector .
9. Connect to a 12v ACC source for Mount this toggle in INPUT 1 (red) through a toggle VIM Acvaon.
an easily accessible locaon.
10. Plug the male end of the into the factory LCD. Plug & Play T-Harness
11. Reconnect all plugs and test for proper funconality.
Basic Installaon Diagram


Produktspezifikationen

Marke: NAV-TV
Kategorie: Nicht kategorisiert
Modell: My Touch NTV-KIT616

Brauchst du Hilfe?

Wenn Sie Hilfe mit NAV-TV My Touch NTV-KIT616 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert NAV-TV

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂĽr -Kategorien-