MWM Phase Bedienungsanleitung

MWM DJ Ausrüstung Phase

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für MWM Phase (16 Seiten) in der Kategorie DJ Ausrüstung. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/16
Quick Start Guide
02 Quick start guide
06 Guide de démarrage rapide
10 Guía de inicio rápido
14 Quick start guide (Deutsch)
18 クイック・スタート・ガイド
22 Warranty
Setup
Connect Phase to your DVS interface
The Receiver needs to be connected to a power
source (computer, power outlet…) to be used.
Connect the output channels of the Receiver
to the line inputs of your DVS interface (either
external sound card or integrated DVS mixer)
using the RCA Cables provided in the box.
Note: Depending on your setup you might have to
manually switch the inputs to line/cd mode on your DVS
interface/mixer.
Prepare your record
Take one of the magnetic stickers provided in
the box and remove the protective band under
the sticker.
Place your record on the turntable, align the
sticker hole with your turntable spindle and
place the sticker on your record.
Note: Be careful, stickers can be difficult to remove from
your records.
Activate the Remotes
Take the Remotes out of the Receiver and place
them on your record on the magnetic stickers.
Don’t move the Remotes until the LED strip
is completely lled up. Remotes are now
calibrated and ready to use.
Make sure your DJ software is set on relative
mode for Phase to work properly.
Note: By default Phase is optimized to work with Serato DJ
software©, if you are using a different DJ software you will
need to set it from the Phase configuration software.
Quick Start Guide
Before starting
Follow these steps carefully to make sure you
get the best experience with your Phase.
Conguration
Download the Phase conguration software
on mwm-store.com/conguration and install it
on your computer.
Plug the Phase Receiver to your computer
using the USB Cable provided in the box, and
launch the conguration software. Make sure
the Remotes are placed on the Receiver
when connecting it to your computer.
Connect to your MWM account (the one you
used to buy your Phase on mwm-store.com).
Or if you don’t have one, please create it to
register your product.
Follow the steps indicated on the conguration
software and install the available update to
access the latest rmware version of Phase.
You are all set and you can
now use Phase!
Charge
Put the Remotes on the Receiver. They will
automatically charge when the Receiver is
connected to a power source (computer,
power outlet...).
Note: If you’re using Phase for the first time, we
recommend you to fully charge the Remotes before
using them. You will need around two hours to
completely charge your Remotes.
For the latest information about Phase, product registration, or additional support
visit mwm-store.com/support
Phase Receiver
Phase Remote
USB Port
Output Channels A & B
Status LED
Setup
buttons
A & B
Dock A Dock B
Remotes
battery
indicators
English
3
2

Produktspezifikationen

Marke: MWM
Kategorie: DJ Ausrüstung
Modell: Phase

Brauchst du Hilfe?

Wenn Sie Hilfe mit MWM Phase benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung DJ Ausrüstung MWM

MWM

MWM Phase Bedienungsanleitung

20 Juli 2024

Bedienungsanleitung DJ Ausrüstung

Neueste Bedienungsanleitung für -Kategorien-

Line 6

Line 6 HX Effects Bedienungsanleitung

15 Oktober 2024
Korg

Korg DT-10 Bedienungsanleitung

8 Oktober 2024
Tascam

Tascam XS-3 Bedienungsanleitung

2 Oktober 2024
Audio-Technica

Audio-Technica AT-VM95EN Bedienungsanleitung

29 September 2024
Behringer

Behringer CMD DC-1 Bedienungsanleitung

28 September 2024
Korg

Korg OT-120 Bedienungsanleitung

27 September 2024
Korg

Korg DTR-2000 Bedienungsanleitung

26 September 2024
Festo

Festo CPX-E-CEC-M1 Bedienungsanleitung

24 September 2024
BeamZ

BeamZ StarFuzer Bedienungsanleitung

24 September 2024
Focusrite

Focusrite Clarett 4Pre USB Bedienungsanleitung

23 September 2024