Moxa AWK-3131A-US Bedienungsanleitung

Moxa Zugangspunkt AWK-3131A-US

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Moxa AWK-3131A-US (7 Seiten) in der Kategorie Zugangspunkt. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/7

www.moxa.com

AWK-3131A Series

Industrial IEEE 802.11a/b/g/n wireless AP/bridge/client

Features and Benefits

•IEEE 802.11a/b/g/n AP/bridge/client support

•Easy setup and deployment with AeroMag

•Millisecond-level Client-based Turbo Roaming1

•Complete redundancy with AeroLink Protection

•Easy network setup with Network Address Translation (NAT)

•Integrated antenna and power isolation

•-40 to 75°C wide operating temperature range (-T models)

•5 GHz DFS channel support

Certifications

Introduction

The AWK-3131A 3-in-1 industrial wireless AP/bridge/client meets the growing need for faster data transmission speeds by supporting IEEE

802.11n technology with a net data rate of up to 300 Mbps. The AWK-3131A is compliant with industrial standards and approvals covering

operating temperature, power input voltage, surge, ESD, and vibration. The two redundant DC power inputs increase the reliability of the power

supply, and the AWK-3131A can be powered via PoE to make deployment easier. The AWK-3131A can operate on either the 2.4 or 5 GHz bands

and is backwards-compatible with existing 802.11a/b/g deployments to future-proof your wireless investments. The Wireless add-on for the

MXview network management utility visualizes the AWK's invisible wireless connections to ensure wall-to-wall Wi-Fi connectivity.

Advanced 802.11n Industrial Wireless Solution

•802.11a/b/g/n compliant AP/bridge/client for flexible deployment

•Software optimized for long-distance wireless communication with up to 1 km line of sight and external high-gain antenna (available only on 5

GHz)

•Supports 60 clients connected concurrently

•DFS channel support allows a wider range of 5 GHz channel selection to avoid interference from existing wireless infrastructure

Advanced Wireless Technology

•AeroMag supports error-free setup of your industrial applications’ fundamental WLAN settings

•Seamless roaming with client-based Turbo Roaming1for < 150 ms roaming recovery time between APs (Client Mode)

•Supports AeroLink Protection for creating a redundant wireless link (< 300 ms recovery time) between APs and their clients

Industrial Ruggedness

•Integrated antenna and power isolation designed to provide 500 V insulation protection against external electrical interference

•Hazardous location wireless communication with Class I Div. II and ATEX Zone 2 certifications

•-40 to 75°C wide operating temperature models (-T) provided for smooth wireless communication in harsh environments

Wireless Network Management With MXview Wireless

•Dynamic topology view shows the status of wireless links and connection changes at a glance

•Visual, interactive roaming playback function to review the roaming history of clients

•Detailed device information and performance indicator charts for individual AP and client devices

1. The Turbo Roaming recovery time indicated herein is an average of test results documented, in optimized conditions, across APs configured with interference-free

20-MHz RF channels, WPA2-PSK security, and default Turbo Roaming parameters. The clients are configured with 3-channel roaming at 100 Kbps traffic load.

Other conditions may also impact roaming performance. For more information about Turbo Roaming parameter settings, refer to the product manual.

www.moxa.com

Specifications

WLAN Interface

WLAN Standards 802.11a/b/g/n

802.11i Wireless Security

Modulation Type DSSS

OFDM

MIMO-OFDM

Frequency Band for US (20 MHz operating channels) 2.412 to 2.462 GHz (11 channels)

5.180 to 5.240 GHz (4 channels)

5.260 to 5.320 GHz (4 channels)2

5.500 to 5.700 GHz (11 channels)2

5.745 to 5.825 GHz (5 channels)

Frequency Band for EU (20 MHz operating channels) 2.412 to 2.472 GHz (13 channels)

5.180 to 5.240 GHz (4 channels)

5.260 to 5.320 GHz (4 channels)2

5.500 to 5.700 GHz (11 channels)2

Frequency Band for JP (20 MHz operating channels) 2.412 to 2.484 GHz (14 channels)

5.180 to 5.240 GHz (4 channels)

5.260 to 5.320 GHz (4 channels)2

5.500 to 5.700 GHz (11 channels)2

Wireless Security WEP encryption (64-bit and 128-bit)

WPA/WPA2-Enterprise (IEEE 802.1X/RADIUS, TKIP, AES)

WPA/WPA2-Personal

Transmission Rate 802.11b: 1 to 11 Mbps

802.11a/g: 6 to 54 Mbps

802.11n: 6.5 to 300 Mbps

Transmitter Power for 802.11a 23±1.5 dBm @ 6 to 24 Mbps

21±1.5 dBm @ 36 Mbps

20±1.5 dBm @ 48 Mbps

18±1.5 dBm @ 54 Mbps

Transmitter Power for 802.11n (5 GHz) 23±1.5 dBm @ MCS0/8 20 MHz

18±1.5 dBm @ MCS7/15 20 MHz

23±1.5 dBm @ MCS0/8 40 MHz

17±1.5 dBm @ MCS7/15 40 MHz

Transmitter Power for 802.11b 26±1.5 dBm @ 1 Mbps

26±1.5 dBm @ 2 Mbps

26±1.5 dBm @ 5.5 Mbps

25±1.5 dBm @ 11 Mbps

Transmitter Power for 802.11g 23±1.5 dBm @ 6 to 24 Mbps

21±1.5 dBm @ 36 Mbps

19±1.5 dBm @ 48 Mbps

18±1.5 dBm @ 54 Mbps

Transmitter Power for 802.11n (2.4 GHz) 23±1.5 dBm @ MCS0/8 20 MHz

18±1.5 dBm @ MCS7/15 20 MHz

23±1.5 dBm @ MCS0/8 40 MHz

17±1.5 dBm @ MCS7/15 40 MHz

Transmitter Power US EU JP

2.4 GHz 26 dBm 18 dBm 18 dBm

5 GHz (UNII-1) 23 dBm 21 dBm 21 dBm

5 GHz (UNII-2) 23 dBm 21 dBm 21 dBm

5 GHz (UNII-2e) 23 dBm 23 dBm 23 dBm

2. DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel.

However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.

www.moxa.com

US EU JP

5 GHz (UNII-3) 23 dBm – –

Note: Based on regional regulations, the maximum transmission power allowed on

the UNII bands is restricted in the firmware, as indicated above.

Receiver Sensitivity for 802.11a (measured at 5.680

GHz)

Typ. -90 @ 6 Mbps

Typ. -88 @ 9 Mbps

Typ. -88 @ 12 Mbps

Typ. -85 @ 18 Mbps

Typ. -81 @ 24 Mbps

Typ. -78 @ 36 Mbps

Typ. -74 @ 48 Mbps

Typ. -72 @ 54 Mbps

Note: Due to a limitation in the receiver sensitivity performance for channels 153 and

161, it is recommended to avoid using these channels in your critical applications.

Receiver Sensitivity for 802.11n (5 GHz; measured at

5.680 GHz)

Typ. -69 dBm @ MCS7 20 MHz

Typ. -71 dBm @ MCS15 20 MHz

Typ. -63 dBm @ MCS7 40 MHz

Typ. -68 dBm @ MCS15 40 MHz

Note: Due to a limitation in the receiver sensitivity performance for channels 153 and

161, it is recommended to avoid using these channels in your critical applications.

Receiver Sensitivity for 802.11b (measured at 2.437

GHz)

Typ. -93 dBm @ 1 Mbps

Typ. -93 dBm @ 2 Mbps

Typ. -93 dBm @ 5.5 Mbps

Typ. -88 dBm @ 11 Mbps

Receiver Sensitivity for 802.11g (measured at 2.437

GHz)

Typ. -88 dBm @ 6 Mbps

Typ. -86 dBm @ 9 Mbps

Typ. -85 dBm @ 12 Mbps

Typ. -85 dBm @ 18 Mbps

Typ. -85 dBm @ 24 Mbps

Typ. -82 dBm @ 36 Mbps

Typ. -78 dBm @ 48 Mbps

Typ. -74 dBm @ 54 Mbps

Receiver Sensitivity for 802.11n (2.4 GHz; measured

at 2.437 GHz)

Typ. -70 dBm @ MCS7 20 MHz

Typ. -69 dBm @ MCS15 20 MHz

Typ. -67 dBm @ MCS7 40 MHz

Typ. -67 dBm @ MCS15 40 MHz

WLAN Operation Mode Access point, Client, Client-Router, Master, Slave, Sniffer

Antenna External, 2/2 dBi, Omni-directional

Antenna Connectors 2 RP-SMA female

Ethernet Interface

Standards IEEE 802.3 for 10BaseT

IEEE 802.3u for 100BaseT(X)

IEEE 802.3ab for 1000BaseT(X)

IEEE 802.3at for PoE

IEEE 802.1Q for VLAN Tagging

IEEE 802.1X for authentication

IEEE 802.1D-2004 for Spanning Tree Protocol

IEEE 802.1w for Rapid Spanning Tree Protocol

PoE Ports (10/100/1000BaseT(X), RJ45 connector) 1

Ethernet Software Features

Management DHCP Server/Client, DNS, HTTP, IPv4, LLDP, Proxy ARP, SMTP, SNMPv1/v2c/v3,

Syslog, TCP/IP, Telnet, UDP, VLAN, Wireless Search Utility, MXview, MXview Wireless,

MXconfig

Routing Port forwarding, Static Route, NAT

Produktspezifikationen

Marke:	Moxa
Kategorie:	Zugangspunkt
Modell:	AWK-3131A-US
Breite:	52.7 mm
Tiefe:	135 mm
Gewicht:	860 g
Produktfarbe:	Schwarz
Internationale Schutzart (IP-Code):	IP30
Höhe:	105 mm
Platzierung:	Wand
AC Eingangsspannung:	9 - 30 V
Gleichstrom-Anschluss (DC):	Ja
Antennentyp:	Extern
Relative Luftfeuchtigkeit in Betrieb:	5 - 95 %
Netzstandard:	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Unterstützte Sicherheitsalgorithmen:	AES, HTTPS, SSH, SSL/TLS, WPA-TKIP
Schnellstartübersicht:	Ja
Zertifizierung:	EMC, EMI, EMS
Power over Ethernet (PoE):	Nein
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	2
Stromverbrauch (max.):	11.7 W
Verpackungsart:	Box
Gehäusematerial:	Metall
Maximale Datenübertragungsrate:	300 Mbit/s
Ethernet LAN Datentransferraten:	10,100,1000 Mbit/s
2,4 GHz:	Ja
Anzahl Kanäle:	13 Kanäle
Antenne Zunahmeniveau (max):	2 dBi
Anzahl der Antennen:	2
LED-Anzeigen:	Fault, LAN, Link, Power, Status, WAN
Temperaturbereich bei Lagerung:	-40 - 85 °C
Montageset:	Ja
Frequenzband:	2.412 - 5.700 GHz
Anzahl enthaltener Produkte:	1 Stück(e)
VLAN-Unterstützung:	Ja
Management-Protokolle:	DHCP Server/Client, HTTP, IPv4, LLDP, SMTP, SNMPv1/v2c/v3, Syslog, TCP/IP, Telnet, UDP, Proxy ARP, VLAN, Wireless Search Utility, MXview, MXview Wireless, MXconfig
Verkabelungstechnologie:	10/100/1000Base-T(X)
MAC Adressen Filtern:	Ja
IP-Adressen Filter:	Ja
DHCP-Client:	Ja
DHCP-Server:	Ja
Reset-Knopf:	Ja
5 GHz:	Ja
Übermittlungsleistung:	23 dBmW
Antennenfunktionen:	Abnehmbare Antenne
Fernauthentifizierungs-Einwähl-Benutzerdienst (RADIUS):	Ja
Empfängersensitivität:	Typ. -90 @ 6 Mbps\nTyp. -88 @ 9 Mbps\nTyp. -88 @ 12 Mbps\nTyp. -85 @ 18 Mbps\nTyp. -81 @ 24 Mbps\nTyp. -78 @ 36 Mbps\nTyp. -74 @ 48 Mbps\nTyp. -72 @ 54 Mbps
RS232:	Ja
Anzahl der Verbinder:	2
Antennenrichtungsart:	Mit kugelförmiger Richtcharakteristik
Antenne Steckertyp:	RP-SMA
Maximale Datenübertragungsrate (5 GHz):	- Mbit/s
MIMO:	Ja
MIMO-Typ:	Multi User MIMO
Maximale Datenübertragungsrate (2,4 GHz):	54 Mbit/s
Syslog:	Ja
Kanalabstand:	20 MHz
Spread-Spectrum Methode:	DSSS, OFDM
6 GHz:	Nein