Moxa AWK-3121 Bedienungsanleitung

Moxa Zugangspunkt AWK-3121

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Moxa AWK-3121 (14 Seiten) in der Kategorie Zugangspunkt. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/14

Reproduction without permission is prohibited.

P/N: 1802031210013

AWK-3121

Quick Installation Guide

Moxa AirWorks

Fourth Edition, December 2010

Overview

Moxa’s AWK-3121 Access Point/Bridge/AP Client is ideal for applications

that are hard to wire, too expensive to wire, or use mobile equipment that

connects over a TCP/IP network. The AWK-3121 is rated to operate at

temperatures ranging from 0 to 60°C for standard models and -40 to

75°C for extended temperature models, and is rugged enough for any

harsh industrial environment. Installation is easy, with either DIN-Rail

mounting or distribution boxes. The DIN-Rail mounting ability, wide

operating temperature range, and IP30 housing with LED indicators make

the AWK-3121 a convenient yet reliable solution for any industrial

wireless application.

Package Checklist

Moxa’s AWK-3121 is shipped with the following items. If any of these

items is missing or damaged, please contact your customer service

representative for assistance.

• 1 AWK-3121

• 2 Swivel-type Antennas (2dBi, RP-SMA, 2.4&5GHz)

• 1 Quick Installation Guide

• 1 Software CD

• 1 Moxa Product Warranty Booklet

• 1 Cable Holder with a Screw

• 2 Protective Caps

Installation and Configuration

Before installing the AWK-3121, make sure that all items in the Package

Checklist are in the box. In addition, you will need access to a notebook

computer or PC equipped with an Ethernet port. The AWK-3121 has a

default IP address that you must use when connecting to the device for

the first time.

Step 1: Select the power source

The AWK-3121 can be powered by a DC power input or PoE (Power over

Ethernet). The AWK-3121 will use whichever power source you choose.

Step 2: Connect the AWK-3121 to a notebook or PC

Since the AWK-3121 supports MDI/MDI-X auto-sensing, you can use

either a straight-through cable or crossover cable to connect the

AWK-3121 to a computer. If the LED indicator on the AWK-3121’s LAN

port lights up, it means the connection is established.

Step 3: Set up the computer’s IP address

Set an IP address on the same subnet as the AWK-3121. Since the

AWK-3121’s default IP address is 192.168.127.253, and the subnet mask

is 255.255.255.0, you should set the IP address of the computer to

192.168.127.xxx and subnet mask to 255.255.255.0.

- 2 -

Step 4: Use the web-based manager to configure

AWK-3121

Open your computer’s web browser and then type

http://192.168.127.253 in the address field to access the homepage

of the web-based management. Before the homepage opens, you will

need to enter the user name and password. For first-time configuration,

enter the default user name and password and then click on the Login

button:

User name: admin

Password: root

ATTENTION

For security reasons, we strongly recommend changing the

password. To do so, select Maintenance 



 Password, and then

follow the on-screen instructions.

Step 5: Select the operation mode for the AWK-3121

By default, the AWK-3121’s operation mode is set to AP. You can change

the setting in Wireless Settings  Basic Wireless Settings if you

would like to use the Client mode.

NOTE To make the change effective, you must click Save Configuration

to save the change or Restart ( Save and Restart button to apply

all changes.

Step 6: Test communications

We will describe two test methods. Use the first method if you are using

only one AWK-3121, and use the second method if you are using two or

more AWK-3121s.

Testing method for one AWK-3121

If you are only using one AWK-3121, you will need a second notebook

computer (B) equipped with a WLAN card. Configure the WLAN card to

connect to the AWK-3121 (the default SSID is MOXA) and change the IP

address of notebook B so that it is on the same subnet as the first

notebook (A), which is connected to the AWK-3121.

After configuring the WLAN card, establish a wireless connection with the

AWK-3121 and open a DOS window on notebook B. At the prompt, type

ping IP address of notebook A

and then press the Enter key. A “Reply from IP address …” response

means the communication was successful. A “Request timed out.”

response means the communication failed. In this case, recheck the

configuration to make sure the connections are correct.

Testing method for two or more AWK-3121s

If you have two or more AWK-3121s, you will need a second notebook

computer (B) equipped with an Ethernet port. Use the default settings for

- 3 -

Produktspezifikationen

Marke:	Moxa
Kategorie:	Zugangspunkt
Modell:	AWK-3121
Gewicht:	810 g
AC Eingangsspannung:	48 V
Antennentyp:	Extern
Betriebstemperatur:	-40 - 75 °C
Montage:	Ja
Unterstützte Sicherheitsalgorithmen:	128-bit WEP, 64-bit WEP, 802.1x RADIUS, SSID, WPA, WPA-AES, WPA-PSK, WPA-TKIP, WPA2, WPA2-PSK
Unterstützte Netzwerkprotokolle:	Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, PPPoE, DHCP, 802.1X, STP/RSTP
Power over Ethernet (PoE):	Ja
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	2
Maximale Datenübertragungsrate:	54 Mbit/s
Ethernet LAN Datentransferraten:	10, 100 Mbit/s
2,4 GHz:	Ja
Anzahl Kanäle:	13 Kanäle
Antenne Zunahmeniveau (max):	2 dBi
Anzahl der Antennen:	1
Eingebaut:	Nein
LED-Anzeigen:	PoE, WLAN
Temperaturbereich bei Lagerung:	-40 - 85 °C
Energiebedarf:	12 - 48 VDC
Rack-Einbau:	Ja
Frequenzband:	2.4, 5 GHz
Schnittstelle:	LAN
Abmessungen (BxTxH):	53.6 x 135 x 105 mm
Eingangsstrom:	0.121 - 0.494 A
Verkabelungstechnologie:	10/100Base-T(X)
MAC Adressen Filtern:	Ja
5 GHz:	Ja
Sicherheit:	EN60950-1, UL60950-1
Konformität mit Industriestandards:	IEEE 802.11a/b/g/h, IEEE 802.11i, IEEE 802.3u, IEEE 802.3af, IEEE 802.1D, IEEE 802.1w, IEEE 802.1Q
Luftfeuchtigkeit (außer Betrieb):	5 - 95 %
Datenrate:	1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54
Konnektivität LEDs:	Ja
Netzwerkfunktionen:	Wireless LAN, Ethernet LAN
Elektromagnetische Interferenzen:	EN301 489-1/-17, FCC Part 15, EN55022/55024, IEC61000-6- 2/-4