Michigan Ravenger 1950 Bedienungsanleitung

Michigan Nicht kategorisiert Ravenger 1950

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Michigan Ravenger 1950 (29 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 28 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/29

User Manual

[Revision 7 ].0 May 2022

READ THIS MANUAL CAREFULLY BEFORE USE – FAILURE TO DO SO MAY RESULT IN INJURY, PROPERTY DAMAGE AND

MAY VOID WARRANTY. • KEEP THIS MANUAL FOR FUTURE REFERENCE. • Products covered by this manual may vary in

appearance, assembly, inclusions, specifications, description, and packaging.

The product is NOT supplied with engine oil, although traces of oil from the manufacturing process may be present. It is essential to

add adequate engine oil of the correct type to the engine before use. Failure to add engine oil will void the product warranty.

Ravenger 1950 Wood er and Chipp Shredder

Safety

Safety messages are designed to alert you to possible dangers or hazards that could cause death,

injury or equipment or property damage if not understood or followed. Safety messages have the

following symbols:

You WILL be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be INJURED if you do

not follow instructions or

equipment damage may occur.

It is important that you read and

understand the instruction manual before

use and keep the manual in a safe place

for future reference. Safety information

presented here is generic in nature – some

advice may not be applicable to every

piece of equipment. The term “equipment"

refers to your product, be it electrical

mains, battery or petrol engine powered.

Read all safety warnings and all

instructions. When using the equipment,

basic safety precautions detailed here

must always be followed to reduce the risk

of fire, electric shock, personal injury and

material damage.

IMPORTANT – Handle the equipment

safely and carefully.

BEFORE USE - If you are not familiar with

the safe operation/handling of the

equipment, or are in any way unsure of any

aspect of suitability or correct use it for

your application, you should complete

training conducted by a person or

organization qualified in safe use and

operation of this , including equipment

fuel/electrical handling and safety.

WARNINGS

• Read all safety warnings and all

instructions. When using the equipment,

basic safety precautions detailed here

must always be followed to reduce the

risk of fire, electric shock, personal injury

and material damage.

• Do not operate the equipment in

flammable or explosive environments,

such as in the presence of flammable

liquids, gases or dust. The equipment

may create sparks or heat that may

ignite vapors, dust etc

• Keep clear of moving parts.

• Equipment may be a potential source of

electric shock if misused. or injury

• Do not operate the equipment if it is

damaged, malfunctioning or is in an

excessively worn state.

• Do not allow others to use the

equipment unless they have read this

manual and are adequately trained .

General Work Area Safety

W ork areas should be clean and well it.

Do not operate the equipment if

bystanders, animals etc are within

operating range of the equipment or the

general work area.

General Personal Safety

Keep packaging away from children - risk

of suffocation! Operators must use the

equipment correctly. When using the

equipment, consider conditions and pay

due care to persons and property.

Prevent unintentional starting of the

equipment - ensure equipment and power

source switches are in the OFF position

before connecting or moving the

equipment. Do not carry equipment with

hands/fingers touching any controls.

Remove any tools or other items that are

not a part of the equipment from it before

starting or switching on.

Stay alert and use common sense when

operating equipment. Do not overreach.

Keep proper footing and balance at all

times. Do not use equipment when tired or

under the influence of drugs, alcohol or

medication. This equipment is not intended

for use by persons with reduced physical,

sensory or mental capabilities.

You must wear appropriate protective

equipment when operating, servicing, or

when in the operating area of the

equipment to help protect from serious

injury, including eye injury, inhalation of

toxic fumes, burns, and hearing loss.

Always wear eye protection. Protective

equipment such as respirators, non-skid

safety shoes, hard hat, hearing protection

etc should be used for appropriate

conditions. Other people nearby should

also wear appropriate personal protective

equipment. Do not wear loose clothing or

jewellery, which can be caught in moving

parts. Keep hair and clothing away from

the equipment.

If devices are provided for the connection

of dust extraction and collection facilities,

ensure these are connected and properly

used. Use of dust collection can reduce

dust-related hazards.

General Equipment Use and Care

Do not force the equipment. Use the

correct equipment for your application. The

correct equipment will perform better and

be safer within its design parameters.

Do not use the equipment if the ON/OFF

switch malfunctions – any equipment that

cannot be controlled with the ON/OFF

switch is dangerous and must be repaired.

Use the equipment and accessories etc. in

accordance with these instructions, taking

into account working conditions and the

work to be performed. Using the equipment

for operations different from those intended

could result in hazardous situations.

Before use, inspect the equipment for

misalignment or binding of moving parts,

loose components, damage or any other

condition that may affect its operation. If

damaged, have the equipment repaired by

an authorized service or technician centre

before use.

Always keep the equipment and

accessories (cutting tools, nozzles, bits

etc) properly maintained. Keep the

equipment, controls and handles dry and

free from dirt, oil and grease.

Store the equipment out of reach of

children or untrained persons. To avoid

burns or fire hazards, let the equipment

cool completely before transporting or

storing. Never place the equipment in

places where there are flammable

materials, combustible gases or

combustible liquids etc.

The equipment is not weatherproof, and

should not be stored in direct sunlight, at

high ambient temperatures or locations

that are damp or very humid.

Chipper Use and Care

• The equipment should be operated by

responsible adults only, 18 years of age

and over.

• The equipment must be used on firm,

flat and level surfaces only.

• Maintain a safe working distance of at

least 15m (36') between the output chute

and any persons, animals or structures.

• Before each use, check the cutting blade

clearance and ensure that blade

fasteners are tight.

• Do not use the equipment for purposes it

is not designed for.

• Do not attempt to chip or shred

branches bigger then 120mm diameter.

• Branches greater than 30mm diameter

that are growing out of a branch being

chipped should be cut off and chipped

separately.

• For roots, always remove any attached

dirt, stones etc before chipping.

• Do not attempt to chip or shred any

material other than suitable wood types.

• Do not attempt to remove materials from

the machine or attempt to un- jam it while

the machine is running.

• Do not use the machine in confined

areas where ventilation or space around

the machine is limited.

• After stopping the engine, always allow

all moving components (blades etc) to

Ravenger 1950 Wood er and Chipp Shredder

stop moving before moving, lifting etc.

General Fuel Safety

Petrol/fuel/gasoline is extremely

flammable – keep clear of

naked flames or other ignition

sources.

• Do not spill fuel. If you spill fuel, wipe it

from equipment immediately – if fuel

gets on your clothing, change them

immediately

• Do not smoke near fuel.

• Always shut off the engine before

refuelling.

• Do not refuel a hot engine.

• Open the fuel cap carefully to allow any

pressure build up in the tank to release -

slowly.

• Always refuel in well ventilated areas.

• Always check for fuel leakage. If fuel

leakage is found, do not start or run the

engine until all leaks are fixed.

General Electrical Safety

• Inspect electrical equipment, extension

cords, power bars, and electrical fittings

for damage or wear before each use.

Repair or replace damaged equipment

immediately.

• s Ensure all power source conform to

equipment voltage requirements and are

disconnected before connecting or

disconnecting equipment .

• When wiring electrically powered

equipment, follow all electrical and

safety codes.

• Wherever possible, use a residual

current device (RCD).

• Electrically grounded equipment must

have an approved cord and be and plug

connected to a grounded outlet .

• Do not bypass the on/off switch and

operate equipment by connecting and

disconnecting the power cord.

• Do not use equipment that has exposed

wiring, damaged switches, covers or

guards.

• Do not use electrical equipment in wet

conditions or damp locations.

• Do not use electrical cords to lift, move

or carry equipment.

• Do not tie electrical cords in tight knots

and ensure electrical cords do not

present trip hazards.

General Service Information

• Have the equipment serviced or repaired

at authorized service centers by

qualified personnel only.

• Replacement parts must be original

equipment manufacturer (OEM) to help

ensure that equipment safety is

maintained.

• Do not attempt any maintenance or

repair work not described in this

instruction manual.

• After use, the equipment and

components may still be hot allow the –

equipment to cool and disconnect spark

plugs and/or electrical power sources

and/or batteries from it before making

adjustments, changing accessories or

performing repair or maintenance.

• Do not make adjustments while the

equipment is running.

• Perform all service related activities

under suitable conditions, such as a

workshop etc.

• Replace worn, damaged or missing

warning/safety labels immediately.

• Do not clean equipment with solvents,

flammable liquids or harsh abrasives.

DANGER

Running petrol engines in confined areas CAN

KILL IN MINUTES. Engine exhaust fumes

contain carbon-monoxide – a deadly gas that you

cannot smell or see.

NEVER run a petrol engine in confined areas

EVEN IF windows and doors are open. ONLY run

petrol engines OUTDOORS and away from

doors, windows and vents.

Do not operate the equipment in hazardous locations,

such as where there may be a risk of fire or explosions

from flammable liquids, gases or dust.

Do not operate the equipment in confined areas where

exhaust gases, smoke or fumes could reach dangerous

concentrations.

Do not refuel petrol engines while they are running.

Never smoke while refuelling petrol engines.

For generators, the electrical output is potentially lethal

and must only be connected to a fixed electrical

installation by an appropriately licensed person.

Be aware that the equipment may include hazardous

components, such as blades, hot surfaces and moving

parts.

Produktspezifikationen

Marke:	Michigan
Kategorie:	Nicht kategorisiert
Modell:	Ravenger 1950

Brauchst du Hilfe?

Wenn Sie Hilfe mit Michigan Ravenger 1950 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Nicht kategorisiert Michigan

Michigan SY0.5 Bedienungsanleitung

6 September 2024

Michigan Raptor 1000 Bedienungsanleitung

20 August 2024

Michigan Raptor 950 Bedienungsanleitung

20 August 2024

Michigan Ravenger 1950 Bedienungsanleitung

22 März 2024

Michigan Raptor 900 Bedienungsanleitung

13 Februar 2024

Michigan GDTSRDMC3C0A Bedienungsanleitung

23 Dezember 2023

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-

DAS Audio AX-112-5 Bedienungsanleitung

16 Oktober 2024

Ferplast Ergocomfort Freetime Bedienungsanleitung

16 Oktober 2024

AEG MECK52 Bedienungsanleitung

16 Oktober 2024

Makita UR012G Bedienungsanleitung

16 Oktober 2024

Stihl HT 70 Bedienungsanleitung

16 Oktober 2024

Ernesto H14270 Bedienungsanleitung

16 Oktober 2024

IFM AC901S Bedienungsanleitung

16 Oktober 2024

Nedis RFPOM120FBK Bedienungsanleitung

16 Oktober 2024

AEG E9KLCS01 Bedienungsanleitung

16 Oktober 2024

ART ProChannel II Bedienungsanleitung

16 Oktober 2024