Mercury WRC2 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Mercury WRC2 (2 Seiten) in der Kategorie Schalter. Dieser Bedienungsanleitung war für 35 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
www.avsl.com 117UK User Manual 350.
Wireless Remote Control
Mains Sockets - Set of 2
Order ref: 350. 7UK 11
User Manual
Leaving an appliance in standby can still consume up to 70% of full power and can shorten the life of the
appliance by 15%. These adaptors can be controlled individually by the remote supplied. Ideal for a wide
variety of electrical appliances and a great solution for controlling appliances in inaccessible places, or for
people with limited mobility.
Specification:
Quantity in set
2 sockets, 1 remote
Voltage
240Vac, 50Hz
Max. load
3120W per socket
Max. current
13A per socket
Standby power
0.6W
Transmission frequency
433.92MHz
Remote: range
Up to 30m (clear line of
sight)
Remote: battery
12V, A 23
Socket: dimensions
83 x 58 x 56mm
Remote: dimensions
84 x 39 x 18.8mm
Weight
225g (set)
Features:
• Reduces fire risk and protects your appliances
• Remote control operates up to 30m away from socket
• Sockets are pre-programmed with remote control supplied for instant use
• Additional sockets and remotes can be added using -learning function self
• Reduces your household energy costs and carbon footprint
Operation:
All socket receivers have been -programmed to the supplied rem and can be used immediately. To pre ote
re-program the remote control with a receiver socket, please follow the instructions below: ny
1) Plug the socket in, then press and hold the program/on/off button on the side of the unit until the LED
indicator begins blinking.
2) Press the On or Off button the desired number on the remote. of
3) The socket should now be programmed with the desired number on your remote and the indicator light
will stop blinking. It is also possible to program multiple sockets to the same remote or to program Note:
up to 3 remote to a single socket by using the same procedure above. s
www.avsl.com 7UK User Manual 350.11
Un-programming a socket from a remote is also possible by unplugging the socket from the mains.
Press and hold the program/on/off button on the side of the socket while plugging back in, keep the it
button pressed for around 5 seconds until the LED indicator begins to flash. Finally release the button to
finish the reset and the LED indicator should stop flashing.
Troubleshooting:
• If the socket is unresponsive to the remote control, please refer to the Un-programming socketa
and Re-programming opera sections in the manual above. tion
• If sockets are not responding correctly or the LED indicator on the remote control becomes dim, then
the battery should be changed at the earliest possible opportunity. Install the 12V (23A) battery in
the battery compartment; making sure the polarity is the correct way around. Always dispose of old
batteries with consideration for the environment.
• Make sure the socket and device are properly connected and powered on.
• Make sure that the socket is placed in an area with proper air circulation without overheating.
Warning:
• For reasons of electrical safety, this socket st never be immersed in water, exposed to damp mu
conditions or excessive force.
• Do not use this product if you find that it is damaged in any way.
• Never ex ed the maximum load current. ce
• Do not attempt to repair this duct or take apart under any circumstances, as this will invalidate pro it
your warranty.
This product is classed as Electrical or Electronic equipment and should not be disposed wi other household or th
commercial waste at the end of its useful life. The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted.
Copyright© 21 AVSL Group Ltd Unit 2 Bridgewater Park, AVSL (Europe) Ltd, Unit 3D North Point House, 20 ,
Taylor Road, Trafford Park, Manchester. M41 7JQ. North Point Bus. Park, New Mallow Road, Cork, Ireland.


Produktspezifikationen

Marke: Mercury
Kategorie: Schalter
Modell: WRC2

Brauchst du Hilfe?

Wenn Sie Hilfe mit Mercury WRC2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Schalter Mercury

Bedienungsanleitung Schalter

Neueste Bedienungsanleitung für -Kategorien-