Mercury RC3 Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Mercury RC3 (2 Seiten) in der Kategorie Schalter. Dieser Bedienungsanleitung war fĂĽr 42 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
www.avsl.com 113UK User Manual 350.
Wireless Remote Control
Mains Sockets - Set of 3
Order ref: 350.113UK
User Manual
Leaving an appliance in standby can still consume up to 70% of full power and can shorten
the life of the appliance by 15%. These adaptors can be controlled individually by the remote
supplied. Ideal for a wide variety of electrical appliances and a great solution for controlling
appliances in inaccessible places, or for people with limited mobility.
Specification:
Quantity in set
3 sockets, 1 remote
Voltage
240Vac, 50Hz
Max. load
2400W per socket
Max. current
10A per socket
Standby power
1W
Transmission frequency
433.92MHz
Remote: range
Up to 30m (clear line of
sight)
Remote: battery
12V, A23
Socket: dimensions
112 x 58 x 65mm
Remote: dimensions
81 x 35 x 15mm
Weight
410g
Features:
• Reduces fire risk and protects your appliances
• Remote control operates up to 30m away from socket
• Sockets are pre-programmed with remote control supplied for instant use
• Additional sockets and remotes can be added using self-learning function
• Reduces your household energy costs and carbon footprint
Operation:
All socket receivers have been pre-paired to the supplied remote and can be used
immediately. To re-pair the remote control with a receiver socket, please follow the ny
instructions below:
1) Plug the socket in and turn on by pressing the yellow button on the side of the unit.
www.avsl.com UK User Manual 350.113
2) Press and hold the yellow button again until the socket turns off.
3) Press the desired key on the remote “ON” .
4) The socket should now be synchronised with the and key on the desired “ON” “OFF”
remote.
It is also possible to pair multiple sockets to the same remote or to pair to 3 remote to a up s
single socket by using the same procedure above .
Unpairing a socket from the remote is also possible by unplugging the socket from the mains.
Press and hold the yellow button on the side of the socket while plugging the socket back in,
keep the button pressed for 5 seconds and the socket should be un-paired from all remot . es
If sockets are not responding correctly or the LED indicator on the remote control becomes
dim, then the battery should be changed at the earliest possible opportunity. Install the 12V
(23A) battery in the battery compartment; making sure the polarity is the correct way around.
Always dispose of old batteries with consideration for the environment.
Warning:
• For reasons of electrical safety, this socket must never be immersed in water, exposed to
damp conditions or excessive force.
• Do not use this product if you find that it is damaged in any way.
• Never exceed the maximum load current.
• Do not attempt to repair this product or take apart under any circumstances, as this will it
invalidate your warranty.
This product is classed as Electrical or Electronic equipment and should not be disposed with other household or
commercial waste at the end of its useful life. The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted.
Copyright© 21 AVSL Group Ltd Unit 2 Bridgewater Park, AVSL (Europe) Ltd, Unit 3D North Point House, 20 ,
Taylor Road, Trafford Park, Manchester. M41 7JQ. North Point Bus. Park, New Mallow Road, Cork, Ireland.


Produktspezifikationen

Marke: Mercury
Kategorie: Schalter
Modell: RC3

Brauchst du Hilfe?

Wenn Sie Hilfe mit Mercury RC3 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Schalter Mercury

Bedienungsanleitung Schalter

Neueste Bedienungsanleitung fĂĽr -Kategorien-