Makita XAG01Z Bedienungsanleitung
Makita
Slijpmachine
XAG01Z
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Makita XAG01Z (40 Seiten) in der Kategorie Slijpmachine. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/40
1
INSTRUCTION MANUAL
MANUEL D'INSTRUCTION
MANUAL DE INSTRUCCIONES
IMPORTANT: Read Before Using.
IMPORTANT: Lire avant usage.
IMPORTANTE: Leer antes de usar.
Cordless Angle Grinder
Meuleuse d’Angle sans Fil
Esmeriladora Angular Inalámbrica
XAG01
007214
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model XAG01
Wheel diameter 115mm (4-1/2")
Spindle thread 5/8"
No load speed (RPM) 10,000 /min
Overall length 317 mm (12-1/2")
Net weight 2.0 kg (4.4 lbs) 2.3 kg (5.0 lbs)
Rated voltage D.C. 18 V
Standard battery cartridge BL1815N BL1830, BL1840
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
GEA006-2
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
8. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use
of a cord suitable for outdoor use reduces the risk
of electric shock.
9. If operating a power tool in a damp location is
unavoidable, use a ground fault circuit
interrupter (GFCI) protected supply. Use of an
GFCI reduces the risk of electric shock.
Personal Safety
10.
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication.
A
moment of inattention while operating power tools
may result in serious personal injury.
11. Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
will reduce personal injuries.
12. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools
with your finger on the switch or energising power
tools that have the switch on invites accidents.
13. Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key
left attached to a rotating part of the power tool
may result in personal injury.
14. Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
3
15.
Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing, and gloves
away from moving parts.
Loose clothes, jewellery
or long hair can be caught in moving parts.
16. If devices are provided for the connection of
dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce dust-
related hazards.
Power tool use and care
17. Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
18. Do not use the power tool if the switch does
not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous
and must be repaired.
19. Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
20. Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool. Power tools are
dangerous in the hands of untrained users.
21. Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tool’s operation. If damaged, have the
power tool repaired before use. Many
accidents are caused by poorly maintained power
tools.
22. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
23. Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the
power tool for operations different from those
intended could result in a hazardous situation.
Battery tool use and care
24. Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire
when used with another battery pack.
25. Use power tools only with specifically
designated battery packs. Use of any other
battery packs may create a risk of injury and fire.
26. When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from one
terminal to another. Shorting the battery
terminals together may cause burns or a fire.
27. Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water.
If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery
may cause irritation or burns.
Service
28. Have your power tool serviced by a qualified
repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
29. Follow instruction for lubricating and
changing accessories.
30. Keep handles dry, clean and free from oil and
grease.
USB063-2
SPECIFIC SAFETY RULES
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to grinder safety rules. If you use this tool unsafely
or incorrectly, you can suffer serious personal
injury.
1. Always use proper guard with grinding wheel.
A guard protects operator from broken wheel
fragments.
2. Accessories must be rated for at least the
speed recommended on the tool warning label.
Wheels and other accessories running over rated
speed can fly apart and cause injury.
3. Hold tool by insulated gripping surfaces when
performing an operation where the cutting
tool may contact hidden wiring. Contact with a
"live" wire will make exposed metal parts of the
tool "live" and shock the operator.
4. When using depressed center grinding
wheels, be sure to use only fiberglass-
reinforced wheels.
5.
Always use safety glasses or goggles. Ordinary
eye or sun glasses are NOT safety glasses.
6. Check the wheel carefully for cracks or
damage before operation. Replace cracked or
damaged wheel immediately. Run the tool
(with guard) at no load for about a minute,
holding tool away from others. If wheel is
flawed, it will likely separate during this test.
7. Use only flanges specified for this tool.
8. Be careful not to damage the spindle, the
flange (especially the installing surface) or the
lock nut. Damage to these parts could result
in wheel breakage.
Produktspezifikationen
| Marke: | Makita |
| Kategorie: | Slijpmachine |
| Modell: | XAG01Z |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Makita XAG01Z benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Slijpmachine Makita
23 September 2024
22 September 2024
11 September 2024
8 September 2024
3 September 2024
3 September 2024
1 September 2024
1 September 2024
31 August 2024
31 August 2024
Bedienungsanleitung Slijpmachine
- Slijpmachine SilverCrest
- Slijpmachine Cotech
- Slijpmachine Bosch
- Slijpmachine Flex
- Slijpmachine Parkside
- Slijpmachine Vonroc
- Slijpmachine AEG
- Slijpmachine Black And Decker
- Slijpmachine Cocraft
- Slijpmachine FERM
- Slijpmachine Ryobi
- Slijpmachine Skil
- Slijpmachine Trotec
- Slijpmachine Eibenstock
- Slijpmachine Hilti
- Slijpmachine Bort
- Slijpmachine DeWalt
- Slijpmachine Einhell
- Slijpmachine Festool
- Slijpmachine Maktec
- Slijpmachine Worx
- Slijpmachine Nuova Simonelli
- Slijpmachine Hikoki
- Slijpmachine Hitachi
- Slijpmachine Hyundai
- Slijpmachine Hazet
- Slijpmachine Kress
- Slijpmachine Max
- Slijpmachine Metabo
- Slijpmachine Stanley
- Slijpmachine Güde
- Slijpmachine Scheppach
- Slijpmachine Workzone
- Slijpmachine United Office
- Slijpmachine Meec Tools
- Slijpmachine Dremel
- Slijpmachine Proxxon
- Slijpmachine Westfalia
- Slijpmachine Profitec
- Slijpmachine Silverline
- Slijpmachine Florabest
- Slijpmachine Baumr-AG
- Slijpmachine Genesis
- Slijpmachine ABB
- Slijpmachine Dolmar
- Slijpmachine Bavaria
- Slijpmachine Brüder Mannesmann
- Slijpmachine Milwaukee
- Slijpmachine Toolcraft
- Slijpmachine Fein
- Slijpmachine Craftsman
- Slijpmachine Powerplus
- Slijpmachine Alpha Tools
- Slijpmachine Ozito
- Slijpmachine Kawasaki
- Slijpmachine Solo
- Slijpmachine Ridgid
- Slijpmachine Duro Pro
- Slijpmachine Ergofix
- Slijpmachine Gamma
- Slijpmachine Global
- Slijpmachine Goon
- Slijpmachine Bunn
- Slijpmachine Meister Craft
- Slijpmachine Yamato
- Slijpmachine Truper
- Slijpmachine Victoria Arduino
- Slijpmachine RIKON
- Slijpmachine Einhell Bavaria
- Slijpmachine McKenzie
- Slijpmachine Rodcraft
- Slijpmachine Gladiator
- Slijpmachine Handwerk
Neueste Bedienungsanleitung für -Kategorien-
23 September 2024
22 September 2024
18 September 2024
18 September 2024
17 September 2024
17 September 2024
16 September 2024
15 September 2024
14 September 2024
11 September 2024