Makita GA7060R Bedienungsanleitung
Makita
Slijpmachine
GA7060R
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Makita GA7060R (16 Seiten) in der Kategorie Slijpmachine. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/16
INSTRUCTION MANUAL
Angle Grinder
GA7060
GA7060R
GA9060
GA9060R
ENGLISH: Original instructions
DOUBLE INSULATION
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: GA7060 GA7060R GA9060 GA9060R
Wheel diameter 180mm 230mm
Max. wheel thickness 6.5mm
Spindle thread M14 or M16 or 5/8″ (country specic)
Rated speed (n) 8,500min-1 6,600min-1
Overall length 450mm
Net weight 5.3kg 5.4kg 5.5kg 5.6kg
Safety class /II
• Due to our continuing program of research and development, the specications herein are subject to change
without notice.
• Specications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
Wear safety glasses.
DOUBLE INSULATION
Only for EU countries
Do not dispose of electric equipment
together with household waste material! In
observance of the European Directive, on
Waste Electric and Electronic Equipment
and its implementation in accordance with
national law, electric equipment that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
For public low-voltage distribution
systems of between 220 V and 250 V
Only for model GA7060 / GA9060
Switching operations of electric apparatus cause volt-
age uctuations. The operation of this device under
unfavorable mains conditions can have adverse effects
to the operation of other equipment. With a mains
impedance equal or less than 0.24 Ohms it can be
presumed that there will be no negative effects. The
mains socket used for this device must be protected
with a fuse or protective circuit breaker having slow
tripping characteristics.
Noise
The typical A-weighted noise level determined accord-
ing to EN60745:
Model GA7060
Sound pressure level (L
pA) : 91 dB(A)
Sound power level (L
WA) : 102 dB (A)
Uncertainty (K) : 3 dB(A)
Model GA7060R
Sound pressure level (L
pA) : 91 dB(A)
Sound power level (L
WA) : 102 dB (A)
Uncertainty (K) : 3 dB(A)
Model GA9060
Sound pressure level (L
pA) : 91 dB(A)
Sound power level (L
WA) : 102 dB (A)
Uncertainty (K) : 3dB(A)
Model GA9060R
Sound pressure level (L
pA) : 91 dB(A)
Sound power level (L
WA) : 102 dB (A)
Uncertainty (K) : 3dB(A)
WARNING: Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN60745:
Model GA7060
Work mode: surface grinding with normal side grip
Vibration emission (a
h, AG) : 7.5 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: surface grinding with anti vibration side grip
Vibration emission (a
h, AG) : 7.5 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: disc sanding with normal side grip
Vibration emission (a
h, DS) : 2.5 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: disc sanding with anti vibration side grip
Vibration emission (a
h, DS) : 2.5 m/s2
Uncertainty (K) : 1.5 m/s2
3 ENGLISH
Model GA7060R
Work mode: surface grinding with normal side grip
Vibration emission (a
h, AG) : 7.5 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: surface grinding with anti vibration side grip
Vibration emission (a
h, AG) : 7.5 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: disc sanding with normal side grip
Vibration emission (a
h, DS) : 2.5 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: disc sanding with anti vibration side grip
Vibration emission (a
h, DS) : 2.5 m/s2
Uncertainty (K) : 1.5 m/s2
Model GA9060
Work mode: surface grinding with normal side grip
Vibration emission (a
h, AG) : 6.5 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: surface grinding with anti vibration side grip
Vibration emission (a
h, AG) : 6.0 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: disc sanding with normal side grip
Vibration emission (a
h, DS) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s2
Work mode: disc sanding with anti vibration side grip
Vibration emission (a
h, DS) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s2
Model GA9060R
Work mode: surface grinding with normal side grip
Vibration emission (a
h, AG) : 6.5 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: surface grinding with anti vibration side grip
Vibration emission (a
h, AG) : 6.0 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: disc sanding with normal side grip
Vibration emission (a
h, DS) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s2
Work mode: disc sanding with anti vibration side grip
Vibration emission (a
h, DS) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s2
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE: The declared vibration emission value
may also be used in a preliminary assessment of
exposure.
WARNING: The vibration emission during actual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING: Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
WARNING: The declared vibration emission
value is used for main applications of the power tool.
However if the power tool is used for other applica-
tions, the vibration emission value may be different.
EC Declaration of Conformity
For European countries only
Makita declares that the following Machine(s):
Designation of Machine: Angle Grinder
Model No./ Type: GA7060, GA7060R, GA9060,
GA9060R
Conforms to the following European Directives:
2006/42/EC
They are manufactured in accordance with the following
standard or standardized documents: EN60745
The technical î‚¿le in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
17.6.2015
Yasushi Fukaya
Director
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
General power tool safety warnings
WARNING: Read all safety warnings and
all instructions. Failure to follow the warnings and
instructions may result in electric shock, î‚¿re and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodiî‚¿ed plugs and matching outlets will
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
Produktspezifikationen
| Marke: | Makita |
| Kategorie: | Slijpmachine |
| Modell: | GA7060R |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Makita GA7060R benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Slijpmachine Makita
23 September 2024
22 September 2024
11 September 2024
8 September 2024
3 September 2024
3 September 2024
1 September 2024
1 September 2024
31 August 2024
31 August 2024
Bedienungsanleitung Slijpmachine
- Slijpmachine SilverCrest
- Slijpmachine Cotech
- Slijpmachine Bosch
- Slijpmachine Flex
- Slijpmachine Parkside
- Slijpmachine Vonroc
- Slijpmachine AEG
- Slijpmachine Black And Decker
- Slijpmachine Cocraft
- Slijpmachine FERM
- Slijpmachine Ryobi
- Slijpmachine Skil
- Slijpmachine Trotec
- Slijpmachine Eibenstock
- Slijpmachine Hilti
- Slijpmachine Bort
- Slijpmachine DeWalt
- Slijpmachine Einhell
- Slijpmachine Festool
- Slijpmachine Maktec
- Slijpmachine Worx
- Slijpmachine Nuova Simonelli
- Slijpmachine Hikoki
- Slijpmachine Hitachi
- Slijpmachine Hyundai
- Slijpmachine Hazet
- Slijpmachine Kress
- Slijpmachine Max
- Slijpmachine Metabo
- Slijpmachine Stanley
- Slijpmachine Güde
- Slijpmachine Scheppach
- Slijpmachine Workzone
- Slijpmachine United Office
- Slijpmachine Meec Tools
- Slijpmachine Dremel
- Slijpmachine Proxxon
- Slijpmachine Westfalia
- Slijpmachine Profitec
- Slijpmachine Silverline
- Slijpmachine Florabest
- Slijpmachine Baumr-AG
- Slijpmachine Genesis
- Slijpmachine ABB
- Slijpmachine Dolmar
- Slijpmachine Bavaria
- Slijpmachine Brüder Mannesmann
- Slijpmachine Milwaukee
- Slijpmachine Toolcraft
- Slijpmachine Fein
- Slijpmachine Craftsman
- Slijpmachine Powerplus
- Slijpmachine Alpha Tools
- Slijpmachine Ozito
- Slijpmachine Kawasaki
- Slijpmachine Solo
- Slijpmachine Ridgid
- Slijpmachine Duro Pro
- Slijpmachine Ergofix
- Slijpmachine Gamma
- Slijpmachine Global
- Slijpmachine Goon
- Slijpmachine Bunn
- Slijpmachine Meister Craft
- Slijpmachine Yamato
- Slijpmachine Truper
- Slijpmachine Victoria Arduino
- Slijpmachine RIKON
- Slijpmachine Einhell Bavaria
- Slijpmachine McKenzie
- Slijpmachine Rodcraft
- Slijpmachine Gladiator
- Slijpmachine Handwerk
Neueste Bedienungsanleitung für -Kategorien-
23 September 2024
22 September 2024
18 September 2024
18 September 2024
17 September 2024
17 September 2024
16 September 2024
15 September 2024
14 September 2024
11 September 2024