Makita GA9020KD Bedienungsanleitung

Makita Schleifmaschine GA9020KD

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Makita GA9020KD (16 Seiten) in der Kategorie Schleifmaschine. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/16
1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
DOUBLE INSULATION
IMPORTANT: Read Before Using.
Angle Grinder
GA7020
GA7020S
GA7021
GA9020
GA9020S
010853
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model GA7020 GA7020S GA7021 GA9020 GA9020S
Depressed center wheel diameter 180 mm 180 mm 230 mm
Max. wheel thickness 6.5 mm 6.5 mm 6.5 mm 6.5 mm 6.5 mm
Spindle thread M14 or 5/8"
(country specific)
M14 or 5/8"
(country specific)
M14 or 5/8"
(country specific)
Rated speed (n) / No load speed (n
0) 8,500 min-1 6,600 min-1 6,600 min-1
Overall length 473 mm 473 mm 473 mm
Net weight 5.5 kg 5.7 kg 5.5 kg 5.8 kg 5.9 kg
Safety class /II
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END202-7
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
ï½¥ Read instruction manual.
ï½¥ DOUBLE INSULATION
ï½¥ Wear safety glasses.
ï½¥ Only for EU countries
Do not dispose of electric equipment
together with household waste
material!
In observance of European Directive
2012/19/EU on waste electric and
electronic equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible
recycling facility.
ENE048-1
Intended use
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
ENF002-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
ENF100-1
For public low-voltage distribution systems of
between 220 V and 250 V.
Switching operations of electric apparatus cause voltage
fluctuations. The operation of this device under unfavorable
mains conditions can have adverse effects to the operation
of other equipment. With a mains impedance equal or less
than 0.27 Ohms it can be presumed that there will be no
negative effects. The mains socket used for this device must
be protected with a fuse or protective circuit breaker having
slow tripping characteristics.
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN60745:
Sound pressure level (L
pA) : 89 dB (A)
Sound power level (L
WA) : 100 dB (A)
Uncertainty (K) : 3 dB (A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Model GA7020,GA7020S
Work mode : surface grinding with normal side
grip
Vibration emission (ah,AG) : 8.5 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode : surface grinding with anti vibration
side grip
Vibration emission (ah,AG) : 8.0 m/s2
Uncertainty (K) : 1.5 m/s2
3
Work mode : disc sanding
Vibration emission (ah,DS) : 2.5 m/s2
Uncertainty (K) : 1.5 m/s
2
Model GA7021
Work mode : surface grinding with normal side
grip
Vibration emission (ah,AG
) : 5.0 m/s2
Uncertainty (K) : 1.5 m/s
2
Work mode : surface grinding with anti vibration
side grip
Vibration emission (ah,AG
) : 4.5 m/s2
Uncertainty (K) : 1.5 m/s
2
Work mode: disc sanding
Vibration emission (ah,DS) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s
2
Model GA9020,GA9020S
Work mode : surface grinding
Vibration emission (ah,AG
) : 5.5 m/s2
Uncertainty (K) : 1.5 m/s
2
Work mode: disc sanding
Vibration emission (ah,DS) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s
2
ENG902-1
• The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
• The declared vibration emission value is used for
main applications of the power tool. However if the
power tool is used for other applications, the
vibration emission value may be different.
WARNING:
• The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENH101-17
For European countries only
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine:
Angle Grinder
Model No./ Type: GA7020, GA7020S, GA7021, GA9020,
GA9020S
Conforms to the following European Directives:
2006/42/EC
They are manufactured in accordance with the following
standard or standardized documents:
EN60745
The technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
31.12.2013
000331
Yasushi Fukaya
Director
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
GEA005-3
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.

Produktspezifikationen

Marke: Makita
Kategorie: Schleifmaschine
Modell: GA9020KD

Brauchst du Hilfe?

Wenn Sie Hilfe mit Makita GA9020KD benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Schleifmaschine Makita

Makita

Makita GA9060R Bedienungsanleitung

15 Oktober 2024
Makita

Makita DGA700Z Bedienungsanleitung

13 Oktober 2024
Makita

Makita GA013GD101 Bedienungsanleitung

3 Oktober 2024
Makita

Makita GA022GD202 Bedienungsanleitung

2 Oktober 2024
Makita

Makita GA7062 Bedienungsanleitung

24 September 2024
Makita

Makita GA7060R Bedienungsanleitung

23 September 2024
Makita

Makita XAG01Z Bedienungsanleitung

22 September 2024
Makita

Makita GA9020KD Bedienungsanleitung

11 September 2024
Makita

Makita DGA469Z Bedienungsanleitung

8 September 2024
Makita

Makita JS3201 Bedienungsanleitung

3 September 2024

Bedienungsanleitung Schleifmaschine

Neueste Bedienungsanleitung für -Kategorien-

Hitachi

Hitachi G 13SR Bedienungsanleitung

14 Oktober 2024
Metabo

Metabo WP820-115 Bedienungsanleitung

8 Oktober 2024
DeWalt

DeWalt DW887N Bedienungsanleitung

7 Oktober 2024
Milwaukee

Milwaukee 0725-21 Bedienungsanleitung

5 Oktober 2024
Milwaukee

Milwaukee 2784-20 Bedienungsanleitung

3 Oktober 2024
Ryobi

Ryobi RAG800-115 Bedienungsanleitung

2 Oktober 2024
Hilti

Hilti GDG 6-A22 Bedienungsanleitung

30 September 2024
Black And Decker

Black And Decker KG2300 Bedienungsanleitung

29 September 2024
Festool

Festool RENOFIX RG 150 Bedienungsanleitung

29 September 2024
Ozito

Ozito AGB-1200 Bedienungsanleitung

28 September 2024