Makita GA5021C Bedienungsanleitung

Makita Schleifmaschine GA5021C

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Makita GA5021C (16 Seiten) in der Kategorie Schleifmaschine. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/16
1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
DOUBLE INSULATION
IMPORTANT: Read Before Using.
Angle Grinder
GA5020
GA5020C
GA5021
GA5021C
GA6020
GA6020C
GA6021
GA6021C
008074
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model GA5020 GA5021 GA5020C/
GA5021C GA6020 GA6021 GA6020C/
GA6021C
Depressed center wheel diameter 125 mm 125 mm 125 mm 150 mm 150 mm 150 mm
Max. wheel thickness 6.4 mm 6.4 mm 6.4 mm 6.4 mm 6.4 mm 6.4 mm
Spindle thread M14 M14 M14 M14 M14 M14
No load speed (no) / Rated speed (n)
12,000 min
-1
12,000 min
-1
10,000 min
-1
10,000 min
-1
10,000 min
-1
9,000 min
-1
Overall length 356 mm 384 mm 390 mm 356 mm 384 mm 390 mm
Net weight 2.7 kg 2.7 kg 2.9 kg 3.0 kg 2.8 kg 3.0 kg
Safety class /II
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END202-7
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
ï½¥ Read instruction manual.
ï½¥ DOUBLE INSULATION
ï½¥ Wear safety glasses.
ï½¥ Only for EU countries
Do not dispose of electric equipment
together with household waste
material!
In observance of European Directive
2012/19/EU on waste electric and
electronic equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible
recycling facility.
ENE048-1
Intended use
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
ENF002-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN60745:
Model GA5020,GA6020 and GA6021
Sound pressure level (L
pA ) : 89 dB(A)
Sound power level (L
WA) : 100 dB(A)
Uncertainty (K) : 3 dB(A)
Model GA5020C,GA5021,GA5021C and
GA6021C
Sound pressure level (L
pA ) : 90 dB(A)
Sound power level (L
WA) : 101 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Model GA6021
Work mode : surface grinding
Vibration emission (ah,AG) : 6.5 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode : disc sanding
Vibration emission (ah,DS) : 2.5 m/s2
Uncertainty (K) : 1.5 m/s2
Model GA5021C
Work mode : surface grinding
Vibration emission (ah,AG) : 8.5 m/s2
Uncertainty (K) : 1.5 m/s2
3
Work mode: disc sanding
Vibration emission (ah,DS) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s
2
Model GA6021C
Work mode : surface grinding
Vibration emission (ah,AG
) : 8.5 m/s2
Uncertainty (K) : 1.5 m/s
2
Work mode : disc sanding
Vibration emission (ah,DS) : 2.5 m/s2
Uncertainty (K) : 1.5 m/s
2
Model GA5020
Work mode : surface grinding
Vibration emission (ah,AG
) : 9.0 m/s2
Uncertainty (K) : 1.5 m/s
2
Work mode: disc sanding
Vibration emission (ah,DS) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s
2
Model GA5020C
Work mode : surface grinding
Vibration emission (ah,AG
) : 9.5 m/s2
Uncertainty (K) : 1.5 m/s
2
Work mode: disc sanding
Vibration emission (ah,DS) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s
2
Model GA6020
Work mode : surface grinding
Vibration emission (ah,AG
) : 10.0 m/s2
Uncertainty (K) : 1.5 m/s
2
Work mode: disc sanding
Vibration emission (ah,DS) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s
2
Model GA5021
Work mode : surface grinding
Vibration emission (ah,AG
) : 13.5 m/s2
Uncertainty (K) : 1.5 m/s
2
Work mode: disc sanding
Vibration emission (ah,DS) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s
2
ENG902-1
• The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
• The declared vibration emission value is used for
main applications of the power tool. However if the
power tool is used for other applications, the
vibration emission value may be different.
WARNING:
• The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENH101-16
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Angle Grinder
Model No./ Type:
GA5020,GA5020C,GA5021,GA5021C,GA6020,GA6021,
GA6021C
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by:
Makita International Europe Ltd.
Technical Department,
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
30.1.2009
000230
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN

Produktspezifikationen

Marke: Makita
Kategorie: Schleifmaschine
Modell: GA5021C

Brauchst du Hilfe?

Wenn Sie Hilfe mit Makita GA5021C benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Schleifmaschine Makita

Makita

Makita GA9060R Bedienungsanleitung

15 Oktober 2024
Makita

Makita DGA700Z Bedienungsanleitung

13 Oktober 2024
Makita

Makita GA013GD101 Bedienungsanleitung

3 Oktober 2024
Makita

Makita GA022GD202 Bedienungsanleitung

2 Oktober 2024
Makita

Makita GA7062 Bedienungsanleitung

24 September 2024
Makita

Makita GA7060R Bedienungsanleitung

23 September 2024
Makita

Makita XAG01Z Bedienungsanleitung

22 September 2024
Makita

Makita GA9020KD Bedienungsanleitung

11 September 2024
Makita

Makita DGA469Z Bedienungsanleitung

8 September 2024
Makita

Makita JS3201 Bedienungsanleitung

3 September 2024

Bedienungsanleitung Schleifmaschine

Neueste Bedienungsanleitung für -Kategorien-

Hitachi

Hitachi G 13SR Bedienungsanleitung

14 Oktober 2024
Metabo

Metabo WP820-115 Bedienungsanleitung

8 Oktober 2024
DeWalt

DeWalt DW887N Bedienungsanleitung

7 Oktober 2024
Milwaukee

Milwaukee 0725-21 Bedienungsanleitung

5 Oktober 2024
Milwaukee

Milwaukee 2784-20 Bedienungsanleitung

3 Oktober 2024
Ryobi

Ryobi RAG800-115 Bedienungsanleitung

2 Oktober 2024
Hilti

Hilti GDG 6-A22 Bedienungsanleitung

30 September 2024
Black And Decker

Black And Decker KG2300 Bedienungsanleitung

29 September 2024
Festool

Festool RENOFIX RG 150 Bedienungsanleitung

29 September 2024
Ozito

Ozito AGB-1200 Bedienungsanleitung

28 September 2024