Luxul Apex XAP-1610 Bedienungsanleitung
Luxul
access point
Apex XAP-1610
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Luxul Apex XAP-1610 (8 Seiten) in der Kategorie access point. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/8
READ ME FIRST
QUICK INSTALL GUIDE
Apex
Wave 2 AC3100 Dual-Band Wireless
Access Point
XAP-1610
Includes:
Wave 2 AC3100 Dual-Band Wireless AP
Mounting Brackets and Hardware
PoE Injector and Power Adapter
Ethernet Cables
™
READ ME FIRST - CONTROLLER COMPATIBILITY
This XAP-1610 is compatible with the Luxul Wireless Controller for fast, easy
configuration and deployment of wireless networks with multiple APs.
nNote: If you’ll be using this AP with a Wireless Controller, refer to
the Quick Install Guide included with the Wireless Controller for
setup instructions.
nNote: Please check to make sure this AP is running the latest version of
firmware (as indicated at https://www.luxul.com/firmware-updates.
aspx) before continuing onto the next steps.
AP SETUP AND CONFIGURATION
1 Physical Installation
The XAP-1610 access point is designed for simple and ecient installation and
can be located one of three ways. First, the included mount is designed to
attach directly to several dierent regions’ standard electrical boxes. Second,
the XAP-1610 may be mounted on a ceiling or wall without a box by using the
included mount as a guide to mark attachment locations. Finally, the XAP-1610
can be placed on a flat surface by attaching the included rubber feet
to the mount.
cCaution: Attach the rubber feet to the mount and attach the mount to
the AP for flat surface placement to avoid overheating and failure.
XSingle Access Point Placement: Because the signal generated by the
XAP-1610 is omnidirectional, the unit should be located as near as possible
to the center of the desired coverage area.
XAP-1610 Single AP Coverage Pattern
XMultiple Access Point Placement: You may need to experiment with
AP placement to optimize the roaming experience. Place APs to ensure
adequate coverage, but not so far apart that there is no signal overlap.
Adjacent APs should overlap enough that the client device has a good
connection to the AP to which it is currently attached, but also sees the
next-nearest AP. Ideally, roaming clients should see signal strength of
two overlapping APs in the range of -60 to -70 dBm at the midway
point between two APs. To learn more about AP placement, visit
luxul.com/ap-placement.
XAP-1610 Multiple AP Coverage and Overlap
nNote: Consider using Ekahau HeatMapper to assist with this process,
available from www.ekahau.com. Luxul also oers an informative
“How-To” video on HeatMapper at luxul.com/how-to-videos.
Produktspezifikationen
Marke: | Luxul |
Kategorie: | access point |
Modell: | Apex XAP-1610 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Luxul Apex XAP-1610 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung access point Luxul
6 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024
Bedienungsanleitung access point
- access point Asus
- access point ZyXEL
- access point Allnet
- access point Devolo
- access point Linksys
- access point Netgear
- access point Fortinet
- access point Netis
- access point Aruba
- access point Lindy
- access point Dell
- access point Mercusys
- access point TRENDnet
- access point Zebra
- access point TP-Link
- access point Edimax
- access point DrayTek
- access point D-Link
- access point Digitus
- access point Lancom
- access point LevelOne
- access point Cisco
- access point Tenda
- access point Ubiquiti Networks
- access point Intellinet
- access point Bintec-elmeg
- access point Planet
- access point EnGenius
- access point Mikrotik
- access point Moog
- access point Comtrend
- access point INCA
- access point Mojo
- access point SMC
- access point Steren
- access point AMX
- access point Cudy
- access point StarTech.com
- access point AirLive
- access point Kingston
- access point LigoWave
- access point Dahua Technology
- access point Atlantis Land
- access point Advantech
- access point Juniper
- access point Insteon
- access point 3Com
- access point Aerohive
- access point V7
- access point Silex
- access point NUVO
- access point Mach Power
- access point IP-COM
- access point ICC
- access point Allied Telesis
- access point Cambium Networks
- access point Brocade
- access point Extreme Networks
- access point Bountiful
- access point Meru
- access point Ruckus Wireless
- access point Premiertek
- access point FlyingVoice
Neueste Bedienungsanleitung für -Kategorien-
19 September 2024
19 September 2024
19 September 2024
17 September 2024
13 September 2024
12 September 2024
12 September 2024
12 September 2024
12 September 2024
12 September 2024