Led Lenser SEO3 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Led Lenser SEO3 (52 Seiten) in der Kategorie Taschenlampe. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/52
LED LENSER® * SEO 3
Operating instructions
Bedienungsanleitung
Instrucciones de uso
Mode d‘emploi
Gebruiksaanwijzing
Istruzioni per l‘uso
Návod k použi
Návod na použitie
Használati útmutató
Navodila za uporabo
Руководство по эксплуатации
수동
取扱説明書
手册
6003 - LED LENSER® SEO 3
6103 - LED LENSER® SEO 3 (blister)
6004 - LED LENSER® SEO 3
6104 - LED LENSER® SEO 3 (blister)
V 1.4
1.
2.
1
2
1.
2
+
-
+
-
-
+
1
AAA
1,5 V
LRO3
2
English ........................................... 03-05
Deutsch .......................................... 06-09
Español .......................................... 10-12
Français ......................................... 13-16
Nederlands................................... 17-20
Italian.............................................. 20-23
Čeština......................................... 24-26
Slovenčina ................................. 29-30
Magyar......................................... 31-34
Slovenščina ............................... 34-36
Pусский ......................................... 37-40
한국어 ............................................ 41-43
日本語 ............................................ 44-47
中文 ................................................. 48-50
LED LENSER® * SEO 3
3
English | Page 03-05 GB
We are delighted that you have purchased one of
our products.
These are usage instructions to help you
familiarise yourself with your new purchase.
All the documents accompanying the product
must be read attentively before using the
product, preserved carefully and if the product
is transferred to a third party, the documents
must be handed over as well. This ensures that
maximum benefit is drawn from the product and
questions from users are anticipated before they
arise.
Above all, comply with the warnings and safety
instructions and dispose of the packaging
material properly.
Additional information for SEO with TEST IT
function
Your LED LENSER SEO 3 headlamp with the item
no. 6103 (item no. 6003: No TEST IT function ) is
packaged with a TEST IT function. This allows
users to test the brightness while the product is
still in the package. For testing, simply push the
yellow TEST IT button on the front of the package.
When testing, please do not look directly into the
light.
The TEST IT button is connected to the battery
housing of the SEO 3 via two wires and should be
removed prior to use.
To remove the TEST IT button and wires, open
the battery housing and remove the 3 x AAA
batteries (see also “Changing of the batteries
/ accumulators” further below). Separate the
two TEST IT button wires from the battery
housing by pulling on each wire until it releases
from the battery housing. Insert the 3 x AAA
batteries noting the correct polarity. Close the
battery housing. Please dispose and recycle the
packaging and TEST IT button with the wires
according to the local regulations.
Product
6003 LED LENSER SEO 3 Green
6103 LED LENSER SEO 3 Green (blister)
6004 LED LENSER SEO 3 Orange
6104 LED LENSER SEO 3 Orange (blister)
1. Battery set:
- 3 x Alkaline batteries AAA/LR03/Micro (1.5 V
DC) (scope of delivery)
- 3 x NiMH-Accumulator AAA/LR03/Micro (1.2 V
DC) (not included in scope of delivery)
2. Switching on and off
In the upper part of the headlamp housing of the
SEO 3, between battery box and the part with
the reflector lens, there is the swich button. This
switch button is used to turn the SEO 3 on. It is
also used to activate the various Light Programs
and Lighting Functions (see Point 5) and to switch
between white light and red light (see Point 5).
In addition, you can also activate the”Transport
Lock”(see Point 6).
3. Focus
In the front, narrower region of the headlamp
housing is the reflector lens through which the
light of the white LED (see Point 5.1) is focused.
The reflector lens is held by a plastic ring. You can
rotate that plastic ring using two fingers, and thus
adjust the focus quickly and easily. This Turning
Focus allows to adjust the angle of the white light
beam continuously. Depending on whether you
want to illuminate an area in the distance or in
front of you, you also can adjust the angle of light
beam to the horizontal. For this you can simply
tilt the part of the head lamp, which contains the
reflector lens and the white LED. The screening
allows using also intermediate positions.
4. Smart Light Technology (SLT)
The SEO 3 is equipped with our Smart Light
Technology (SLT). Thanks to the use of a
microcontroller, the light output of the LED can
be controlled and the user can use various Light
Programs and Light Functions. By using a single
switch it was possible to design the interface
to be simple and user-friendly. The SEO 3 can
give the user light in different ways. There are
thus two Light Programs and a number of Light
Functions available. To switch the pocket torch on
and off and to select the various Light Functions
etc., the switch (see Point 2) has to be used.
What basically applies is that the brightness of the
SEO 3 is monitored by the in-built temperature
control unit.
5. Light Programs and Light Functions
In the SEO 3 are two LEDs (LED= Light Emitting
Diode) installed.
The white LEDs are ideal for normal use. This
very bright white light might be not good when
your eyes have become accustomed through the
so-called dark adaptation to low ambient light.
Otherwise than with the use of the whitelight, it
remains the current adjustment of the eye to low
brightness obtained when the red light of the red
LED is used.
In order to switch between the white and the red
LED, when the SEO 3 is off, press and hold the
switch button for 2 seconds. The head lamp will
change from red to white or from white to red,
and then release the switch button before the
lights go out, because if you press too long the
switch button you activate the “Transport Lock”
(see section 6)!
The points below deal with the Light Functions
of the white LEDs (Light Program White / Point
5.1) and the red LED (Light Program “Red Night
Vision” / Point 5.2).
5.1 Light Program White
If the Lighting Program White is enabled (see
Point 5), you can use the white light of the head
lamp.
When the switch button is pressed, if the SEO 3
is off, the head lamp glows in the Light Function
Power at full brightness. When you switch a
second time within 2 seconds, the SEO 3 glows
with lower brightness (Light Low Power).
After the Light Function Low Power (altogether
3 times fast switching, i.e. you do not wait longer
than 2 seconds between each switching) comes
the Light Function Signal (slow even flashing) in
the Light Program White.
Additional switching turns SEO 3 off and the circle
starts again with the Light Function Power when
you press the switch button again.
So the Light Functions are in a loop. But Please
note that you turn off the head lamp by every
switching if since the previous switching more
than 2 seconds have elapsed. For example in
case you let pass more than 2 seconds after you
turned the Light Function Low Power on the next
switching will not change to head lamp to Light
Function Signal but will turn the SEO 3 off.


Produktspezifikationen

Marke: Led Lenser
Kategorie: Taschenlampe
Modell: SEO3

Brauchst du Hilfe?

Wenn Sie Hilfe mit Led Lenser SEO3 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Taschenlampe Led Lenser

Bedienungsanleitung Taschenlampe

Neueste Bedienungsanleitung für -Kategorien-