LD Systems LDI02 Bedienungsanleitung

LD Systems Nicht kategorisiert LDI02

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für LD Systems LDI02 (1 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 43 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/1

EC DECLARATION OF CONFORMITY

These devices meet the essential requirements and further relevant speciﬁcations of Directive 2004/108/EC (EMC).

For more information, see www.adamhall.com.

CORRECT DISPOSAL OF THIS PRODUCT (ELECTRICAL WASTE)

(Applicable in the European Union and other European countries with separate collection systems)

This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes

at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste

disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of

material resources.

Household users should contact either the retailer where they purchased this product, or their local government of ﬁce, for

details on where and how they can recycle this item in an enviromentally friendly manner.

Business users should contact their supplier and check the terms and conditions of the purchase contract. This product

should not be mixed with other commercial wastes for disposal.

WEEE-DECLARATION

Your LD Systems product was developed and manufactured with high quality materials and components wich can be

recycled and/or reused. This symbol indicates that electrical and electronic equipment must be disposed of separately

from normal waste at the end of its operational lifetime.

Please dispose of this product by bringing it to your local collection point or recycling centre for such equipment. This will

help to protect the environment in which we all live.

REQUESTING WARRANTY-SERVICE

To request warranty service for the product, contact Adam Hall or the Adam Hall authorized reseller from which

you purchased the product.

BATTERIES AND ACCUMULATORS

The supplied batteries or rechargeable batteries can be recycled. Please dispose of them as special waste or return

them to your specialist dealer. In order to protect the environment, only dispose exhausted batteries.

ECOLOGY AND ENERGY SAVING

Saving electric energy helps to protect the environment. Please turn off all electrical equipment when it is not in

use. To avoid power consuption in idle mode, disconnect all electrical equipment from mains when not in use.

LIMITATION OF LIABILITY

If your Adam Hall branded hardware product fails to work as warranted above, your sole and exclusive remedy

shall be repair or replacement. Adam Halls’ maximum liability under this limited warranty is expressly limited

to the lesser of the price you have paid for the product or the cost of repair or replacement of any hardware

components that malfunction in conditions of normal use.

Adam Hall is not liable for any damages caused by the product or the failure of the product, including any lost

proﬁts or savings or special, incidental, or consequential damages. Adam Hall is not liable for any claim made by

a third party or made by you for a third party.

This limitation of liability applies whether damages are sought, or claims are made, under this Limited Warranty

or as a tort claim (including negligence and strict product liability), a contract claim, or any other claim. This limitation

of liability cannot be waived or amended by any person. This limitation of liability will be effective even if

you have advised Adam Hall of an authorized representative of Adam Hall of the possibility of any such damages.

This limitation of liability however, will not apply to claims for personal injury.

This Limited Warranty gives you speciﬁc legal rights. You may also have other rights that may vary from state to

state or from country to country. You are advised to consult applicable state or country laws for a full determination

of your rights.

WWW. .COMLD-SYSTEMS LDI02

Active DI-Box

THANK YOU FOR CHOOSING LD SYSTEMS!

We have designed this product to operate reliably over many years. Therefore LD Systems guarantees for high

quality products with its name and many years of experience as a producer.

Please take a few moments to read these instructions carefully, as we want you to enjoy your new LD Systems

products quickly and to the fullest.

For information about LD Systems check out our website WWW.LD-SYSTEMS.COM

PREVENTIVE MEASURES

1. Please read this information carefully.

2. Keep all information and instructions in a safe place.

3. Please follow the instructions.

4. Please observe all warnings. Don‘t remove safety instructions or any other information located on the device.

5. Use the device only in the intended manner.

6. Use only stable and appropriate stands and/or mounts when the device is permanently installed. Make certain

that wall brackets are ﬁrmly secured. Make certain that the unit is installed securely and cannot fall down.

7. When installing please observe the corresponding safety standards for your country.

8. Do not install the device near radiators, heat accumulators, ovens or other sources of heat. Make certain that

the device is always installed so that is cooled sufﬁciently and cannot overheat.

9. Do not place open sources of ignition, e.g., burning candles, on the device.

10. Do not cover ventilation slots.

11. Do not operate the device in the immediate vicinity of water. Do not expose this equipment to combustible

materials, liquids or gases.

12. Please make certain that dripping or splashing water cannot get inside the device. Do not put objects ﬁlled

with ﬂuids, such as vases or drinking vessels, on top of the device.

13. Make certain that objects cannot fall into the device.

14. Use the device only with accessories with which the manufacturer intends the device to be used.

15. CAUTION: If this device has a mains connector equipped with protective earth, it must be connected to a

mains socket with a protective ground connection. Never disable the function of the protective ground connection

of the included power cord.

16. Do not turn on the device immediately if it was exposed to strong temperature ﬂuctuations (for example after trans-

portation). Moisture and condensation may damage the device. Leave the device switched off until it has reached room

temperature.

17. Do not open the device and do not make any changes to the device.

18. Before connecting to mains power, make certain that the mains voltage and the mains frequency are the same as the

operating values of the device (see type label). If the device is equipped with a supply voltage selector switch, make certain

that the values of the device match the values of the mains power before connecting. If the plug on the included cord does

not ﬁt your mains outlet, contact your electrician.

19. Make certain that the power cord is not stepped on. Protect the power cord against pinching, especially at the device

plug and the power plug.

20. In order to prevent damage or accidents, for example, due to tripping hazards, check all connections once you have

connected the device.

21. When connecting the device, make certain that the power plug remains readily accessible.

Always pull out the power plug when the device is not in use or when you clean the device. Disconnect the power cord by

pulling the plug not the cable. Never touch the power cable and power adapter with wet hands.

22. Avoid switching the device on and off at short intervals, because it may shorten the durability of the device.

23. IMPORTANT: Replace fuse only by fuse of same type and rating! If fuse blows repeatedly please contact

authorized service center!

24. In order to disconnect the device completely from the mains voltage, the power plug must be unplugged.

25. If your device is equipped with a Volex power connector, the matching Volex device plug must be unlocked in order to

disconnect it. This also means that a tug on the power cord can pull the device out of place, thus causing personal injuries

and/or property damage. Thus please make certain to route your cables carefully.

26. If there is a risk of lightning strike or during extended periods of disuse, unplug the power plug.

27. During transport, make certain that the equipment being transported cannot fall down and possibly cause personal

injuries and/or property damage.

28. If your device no longer works properly, if it has been exposed to liquids or an object has fallen inside it or if it has been

damaged in some other manner, turn the device off immediately und unplug the power plug. This device should be repaired

only by authorized experts.

29. Use only a dry cloth to clean the device.

30. Comply with all of the disposal laws that are applicable in your country. During disposal, please separate plastic and

paper/cardboard.

31. Plastic bags must be kept out of the reach of children.

LD SYSTEMS LDI02 ACTIVE DI-BOX

The LD Systems LDI02 active DI-Box takes high impedance, unbalanced signals, such as guitar and bass signals

and converts them to low impedance, balanced signals. As a consequence a balanced microphone input of a

mixing board or an audio interface can be used without unwanted background noise.

It provides a PAD switch, which reduces the gain by 20 dB if needed and a Ground Lift which can help to prevent

ground loops or humming noise. The LDI02 can be operated either with a 9 V battery or phantom power.

CONTROLS, INDICATORS AND CONNECTORS

Unbalanced XLR input.

Unbalanced 6.3 mm jack input.

Unbalanced link output 6.3 mm jack.

Activating the PAD switch results in a gain reduction of 20 dB.

Balanced XLR output.

Switching to LIFT breaks the ground connection between in- and output. This can help to prevent ground loops or

humming noise.

Power On / Off switch

LED blinks during operation with 9 V battery. LED is constantly on when operating with phantom power.

Battery compartment (9 V battery not included)

SPECIFICATIONS

Frequency response: 20 Hz - 20 kHz

THD: < 0.0015 % at 1 kHz

Signal-to-noise ratio: 107,5 dB

Input impedance: 1 MOhm

Output impedance: <100 Ohm

Input: (unbalanced): 6.3 mm mono jack, XLR (unbalanced)

Link output:(unbalanced): 6.3 mm mono jack (unbalanced)

Output: balanced XLR

Maximum input level: +10 / +30 dBu

FEATURES

· Unbalanced 6.3 mm jack and XLR input

· Link output

· -20 dB PAD

· Ground lift

· Balanced XLR output

· Battery or phantom power operation

CAUTION! HIGH VOLUME!

This product is designed for professional use. Therefore the commercial use of this equipment

is liable to the rules and regulations of the Accident Prevention & Insurance Association of your industry sector.

Adam Hall as a manufacturer is bound to inform you formally about the existence of eventual sanitary risks. Risk of hearing

damage due to prolonged exposure to excessive volumes: When using this product high sound pressure levels (SPL) can be

generated, sufﬁcient to cause permanent hearing damage to performers, production crew and audience members. Caution

should be taken to avoid prolonged exposure SPL in excess of 90 dB.

LIMITED WARRANTY

This Limited Warranty applies to the Adam Hall, LD Systems, Defender, Palmer, Cameo and Eminence branded

products.

The statutory warranty rights towards the seller are not affected by this guarantee. In fact, it justiﬁes, additional

independent warranty claims towards Adam Hall.

Adam Hall warrants that the Adam Hall product you have purchased from Adam Hall or from an Adam Hall autho-

rized reseller is free from defects in materials or workmanship under normal use for a period of 2 years from the

date of purchase.

The Limited Warranty Period starts on the date of purchase. In order to receive warranty services you are required

to provide proof of the purchase date. Your dated sales or delivery receipt, showing the date of purchase, is your

proof of the purchase date. Should products of the brands named above be in need of repair within the limited war-

ranty period, you are entitled to warranty services according to the terms and conditions stated in this document.

This Limited Warranty extends only to the original purchaser of this Adam Hall branded product and is not trans-

ferable to anyone who obtains ownership of the Adam Hall branded product from the original purchaser. During

the Limited Warranty Period, Adam Hall will repair or replace the defective component parts or the product. All

component parts or hardware products removed under this Limited Warranty become the property of Adam Hall.

In the unlikely event that your Adam Hall product has a recurring failure, Adam Hall, at its discretion, may elect to

provide you with a replacement unit of Adam Hall´s choice that is at least equivalent to your Adam Hall branded product

in hardware performance.

Adam Hall does not warrant that the operation of this product will be uninterrupted or error-free. Adam Hall is not

responsible for damage that occurs as a result of your failure to follow the instructions included with the Adam Hall

branded product.

This Limited Warranty does not apply,

- to wear parts (e.g. accumulator)

- to any product from which the serial number has been removed or that has been damaged or rendered defective

as the result of an accident

- in case of, misuse, abuse, or other external causes - by operation outside the usage parameters stated in the

user´s documentation shipped with the product by use of spare parts not manufactured or sold by Adam Hall

- by modiﬁcation or service by anyone other than Adam Hall

These terms and conditions constitute the complete and exclusive warranty

Produktspezifikationen

Marke:	LD Systems
Kategorie:	Nicht kategorisiert
Modell:	LDI02
Breite:	135 mm
Tiefe:	128 mm
Gewicht:	645 g
Produktfarbe:	Black, Blue
Höhe:	53 mm
Energiequelle:	Battery, DC
Typ:	Aktive Direktbox
Gehäusematerial:	Metall
Anzahl:	1
THD, totalklirren:	0.0015 %
Frequenzbereich:	20 - 20000 Hz
Akku-/Batteriespannung:	9 V
Ausgangsspannung:	24-48 V
XLR-Out:	1
Beste Verwendung:	Synthesizer
Line-in:	Ja
Synchronisations-Eingangsimpedanz:	1 Ohm
Erdfreischalter:	Ja