La Crosse Technology WS9057 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für La Crosse Technology WS9057 (15 Seiten) in der Kategorie Wetterstation. Dieser Bedienungsanleitung war für 40 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/15
18
Stands
LCD Display
Function keys
WEATHER STATION
Instruction Manual
INTRODUCTION:
Congratulations on purchasing this state-of-the-art weather station as an example of innovative design and quality piece of
engineering. Providing radio controlled time, date, calendar, Moon phase, indoor and outdoor temperature, indoor and outdoor
relative humidity, and air pressure history information. This unit will never keep you guessing on current and future weather
conditions. Operation of this product is simple and straightforward. By reading this operating manual, the user will receive a better
understanding of the Weather Station together with the optimum benefit of all its features.
FEATURES:
The Weather Station
DCF Radio controlled time with manual setting option
Time reception ON/OFF (user selectable)
12/24 hour time display
Time zone option ±12 hours
Weekday and day calendar display (year and month only in setting mode)
Alarm setting with snooze function
Battery compartment
Hanging hole
« Instant Transmission+» is the up and coming state-of-the-art new wireless transmission technology,
exclusively designed and developed by LA CROSSE TECHNOLOGY.
“IT +” offers you an immediate update of all your outdoor data measured from the transmitters: follow your
climatic variations in real-time!
19
Display 12 Moon phases throughout the year
Weather forecasting with weather tendency indicator
Indoor comfort indicator
Temperature display in ºC/ºF
Indoor and outdoor temperature display with MIN/MAX records and time of reception
Humidity data display as RH%
Indoor and outdoor humidity display with MIN/MAX records
Relative air pressure hPa/ inHg with adjustable reference value
Weather icon sensitivity setting
Relative air pressure history for the past 24 hours (electronic barometer with barometric pressure trend)
Wireless transmission at 868 MHz
Signal reception intervals at 4 seconds
LCD contrast selectable
Can receive up to 3 outdoor transmitters
Low battery indicator
Table standing or wall mounting
The Outdoor Thermo-hygro Transmitter
Remote transmission of outdoor temperature and humidity to Weather Station by 868 MHz
Display alternately the outdoor temperature and humidity readings on LCD
Shower proof casing
Wall mounting case (Mounting at a sheltered place. Avoid direct rain and sunshine)
TO INSTALL AND REPLACE BATTERIES IN THE WEATHER STATION
The Weather Station uses 1.5V batteries. To install and replace 2 x C, IEC LR14,
the batteries, please follow the steps below:
1. Insert finger or other solid object in the space at the bottom center of the
battery compartment and lift up to remove the cover.
2. Insert batteries observing the correct polarity (see marking).
3. Replace compartment cover.
INSTALL AND REPLACE BATTERIES IN THE THERMO-HYGRO TRANSMITTER
The Thermo-hygro transmitter uses 2 x AA, IEC LR6, 1.5V battery. To install and replace the batteries, please
follow the steps below:
1. Remove the battery compartment cover.
2. Insert the batteries, observing the correct polarity (see marking).
3. Replace the battery compartment cover on the unit.
20
Note:
In the event of changing batteries in any of the units, all units need to be reset by following the setting up procedures. This is
because a random security code is assigned by the transmitter at start-up and this code must be received and stored by the
Weather station in the first 3 minutes of power being supplied to it
BATTERY CHANGE:
It is recommended to replace the batteries in all units on an annual basis to ensure optimum accuracy of these units.
Please participate in the preservation of the environment. Return used batteries to an authorized depot.
SETTING UP
WHEN ONE TRANSMITTER IS USED
1. First, insert the batteries in the transmitter (see “How to install and replace batteries in the Thermo-hygro outdoor
transmitter ” above).
2. Within 2 minutes of powering up the transmitter, insert the batteries in the Weather Station (see “How to install and replace
batteries in the Weather Station ” above). Once the batteries are in place, all segments of the LCD will light up briefly and a
short signal tone will sound. Following the indoor temperature/humidity and the time as 0:00 will be displayed. If these
information are not displayed on the LCD after 60 seconds, remove the batteries and wait for at least 60 seconds before
reinserting them. Once the indoor data is displayed user may proceed to the next step.
3. After the batteries are inserted, the Weather station will start receiving data signal from the transmitter. The outdoor
temperature and humidity data should then be displayed on the Weather station. If this does not happen after 2 minutes, the
batteries will need to be removed from both units and reset from step 1.
4. In order to ensure sufficient 868 MHz transmission however, the distance between the Weather Station and the transmitter
should not be more than 100 meters (see notes on “ ”). Positioning” and “868 MHz Reception
Note: In the event of changing batteries of the units, ensure the batteries do not spring free from the contacts. Always wait at least 1
minute after removing the batteries before reinserting, otherwise start up and transmission problems may occur.
WHEN MORE THAN ONE TRANSMITTER IS USED
1. User shall remove all the batteries from the Weather Station and transmitters, and wait 60 seconds.
2. Insert the batteries in the first transmitter.
3. Within 2 minutes of powering up the first transmitter, insert the batteries in the Weather Station. Once the batteries are in
place, all segments of the LCD will light up briefly and a short signal tine will sound. Following the indoor temperature/humidity
and the time as 0:00 will be displayed. If these information are not displayed on the LCD after 60 seconds, remove the
batteries from both units and wait for at least 60 seconds before reinserting them.
4. The outdoor temperature and humidity data from the first transmitter (channel 1) should then be displayed on the Weather
Station. Also, the signal reception icon will be displayed. If this does not happen after 2 minutes, the batteries will need to be
removed from both units and reset from step 1.
5. Insert the batteries in the second transmitter as soon as the outdoor temperature and humidity readings from the first
transmitter are displayed on the Weather Station.
Note : User shall insert the batteries into the second transmitter within 45 seconds after the Weather Station displays the
information of the first transmitter.
6. The outdoor temperature and humidity from the second transmitter and the "channel 2" icon should then be displayed on the
Weather Station. If this does not happen after 2 minutes, the batteries will need to be removed from all the units and reset from
step 1.
7. Insert the batteries in the third transmitter as soon as the "channel 2" icon and outdoor data are displayed on the Weather
Station. Then within 2 minutes, the channel 3 outdoor data from the third transmitter will be displayed and the channel icon will
shift back to "1" once the third transmitter is successfully received. If this is not happen, user shall restart the setting up from


Produktspezifikationen

Marke: La Crosse Technology
Kategorie: Wetterstation
Modell: WS9057

Brauchst du Hilfe?

Wenn Sie Hilfe mit La Crosse Technology WS9057 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Wetterstation La Crosse Technology

Bedienungsanleitung Wetterstation

Neueste Bedienungsanleitung für -Kategorien-