La Crosse Technology WS-9240U-IT Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für La Crosse Technology WS-9240U-IT (9 Seiten) in der Kategorie Wetterstation. Dieser Bedienungsanleitung war für 23 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/9
1
Contents
Language Page
________________________________________________
English 1
French
Spanish
2
WIRELESS 915 MHz TEMPERATURE STATION
Instruction Manual
TABLE OF CONTENTS
Topic Pa
g
e
Inventory of Contents
Features
Setting Up
Battery Installation
Function keys
LCD Screen and Settings
Manual Settings
Display of Indoor Temperature and MIN/MAX Records
Display of Outdoor Temperature and MIN/MAX Records
3
Reset of MIN/MAX records
915 MHz Reception
Mounting
Care and Maintenance
Warranty Information
This product offers:
INSTANT TRANSMISSIO
N
is the state-of-
the-art new wireless transmission
technology, exclusively designed and
developed by LA CROSSE TECHNOLOGY.
INSTANT TRANSMISSION offers you an
immediate update (every 4 seconds!) of all
your outdoor data measured from the
transmitters: follow your climatic variations
in real-time!
4
INVENTORY OF CONTENTS
1. Wireless Temperature Station
2. Wireless Temperature Sensor (TX40U-IT) and mounting bracket.
3. Instruction Manual
FEATURES:
Temperature station
Stand
Hanging
hole
Battery
compartment
LCD
Displa
y
Function
Keys
5
The Temperature Station
x Manual time setting (hour and minute display)
x Time display 12 -hour time format
x Indoor and outdoor temperature reading in degree Fahrenheit (°F)
x Display MIN/MAX indoor and outdoor temperature display
x Low battery indicator
x Wireless transmission at 915 MHz
x Signal reception intervals at 4 seconds
x Wall mounting or table standing
6
The Outdoor Temperature Transmitter
x Remote transmission of outdoor temperature
to Temperature Station by 915 MHz signals
x Rain proof casing
x Wall mounting and table-standing
xMounting at a sheltered place. Avoid
direct rain and sunshine
SETTING UP:
Note: this temperature station can only receive one transmitter only.
1. First, insert the batteries to the transmitter (see “How to install and
replace batteries in the Temperature transmitter below).
2. Within 30 seconds of powering up the transmitter, insert the
7
batteries to the Temperature Station (see “How to install and
replace batteries in the Temperature station” below). Once the
batteries are in place, all segments of the LCD will light up briefly.
Following the indoor temperature, the time as 12:00 will be
displayed. If they are not shown in LCD after 60 seconds, remove
the batteries and wait for at least 60 seconds before reinserting
them. Once the indoor data is displayed user may proceed to the
next step.
3. After the batteries are inserted, the Temperature Station will start
receiving data signal from the transmitter. The outdoor temperature
should then be displayed on the Temperature station. If this does
not happen after 2 minutes, the batteries will need to be removed
from both units and reset from step 1.
4. In order to ensure sufficient 915 MHz transmission however, this
should under good conditions be a distance no more than 200 feet
8
(60 meters) between the final position of the Temperature Station
and the transmitter (see notes on “Positioning” and “915 MHz
Reception”).
HOW TO INSTALL AND REPLACE BATTERIES IN THE
TEMPERATURE STATION
The Temperature Station uses 2 x AAA, IEC LR3, 1.5V batteries. When
batteries will need to be replaced, the low
battery icon will appear on the LCD. To
install and replace the batteries, please
follow the steps below:
1. Lift up the battery compartment cover.
2. Insert batteries observing the correct
polarity (see marking).
3. Replace compartment cover.
9
HOW TO INSTALL AND REPLACE BATTERIES IN THE
TEMPERATURE TRANSMITTER
The Temperature transmitter uses 2 x AAA, IEC
LR3, 1.5V batteries. When batteries will need to be
replaced, the low battery icon will appear on the
LCD of the Temperature Station. To install and
replace the batteries, please follow the steps
below:
1. Remove the battery compartment cover.
2. Insert the batteries, observing the correct
polarity (see marking).
3. Replace the battery holder to the unit.
Note:
In the event of changing batteries in any of the units, all units need to be
reset by following the setup procedures. This is because a random
10
security code is assigned by the transmitter at start-up and this code must
be received and stored by the Temperature Station in the first few minutes
of power supplying.
BATTERY CHANGE:
It is recommended to replace the batteries in all units regularly to ensure
optimum accuracy of these units. (Battery life –see Specifications)
Please participate in the preservation of the environment.
Return used batteries to an authorized depot.
FUNCTION KEYS:
The Temperature Station has only two easy to use function keys:
11
SET key
x Press and hold for about 3 seconds to enter the Manual setting
mode.
+ key
x Press to make adjustment in the setting mode.
x Press and hold to reset all MIN/MAX records
+ key
SET ke
y
12
Outdoor Reception
Signal icon*
MIN/MAX Outdoor
temperature
LCD SCREEN AND SETTINGS:
Time
Indoor Temperature
in °F
Outdoor Temperature
in °F
MIN/MAX Indoor
temperature
Low battery indicator
(temperature station)
Low battery indicato
r
(
transmitter
)


Produktspezifikationen

Marke: La Crosse Technology
Kategorie: Wetterstation
Modell: WS-9240U-IT

Brauchst du Hilfe?

Wenn Sie Hilfe mit La Crosse Technology WS-9240U-IT benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Wetterstation La Crosse Technology

Bedienungsanleitung Wetterstation

Neueste Bedienungsanleitung für -Kategorien-