La Crosse Technology WS-9047TWC-IT Bedienungsanleitung
La Crosse Technology
Wetterstation
WS-9047TWC-IT
Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr La Crosse Technology WS-9047TWC-IT (13 Seiten) in der Kategorie Wetterstation. Dieser Bedienungsanleitung war fĂĽr 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/13
1
WEATHER STATION
Instruction Manual
TABLE OF CONTENTS
Topic Page
Inventory of Contents 3
Features 4
Setting up 6
WWVB radio controlled time 13
Function keys 15
LCD screen 17
Manual settings 19
LCD contrast 20
Time Zone Setting 20
Daylight saving time ON/OFF 21
Time reception ON/OFF 22
12/24 hour time display 23
Manual time setting 24
Calendar setting 24
2
Temperature measuring units (ÂşF/ÂşC) 26
Air pressure measuring Units (inHg/hPa) 26
Relative pressure setting 27
Forecast sensitivity setting 28
Alarm (setting and snooze) 29
Moon phases 30
Indoor temperature and humidity 31
Comfort indicator 32
Toggling and resetting the indoor data 32
Weather forecast tendency and icons 33
Air pressure history (bar graph) 36
Outdoor temperature and humidity 37
Minimum/Maximum Temperature/Humidity 38
915MHz reception 40
Mounting 41
Maintenance and Care 43
Specifications 44
Warranty Information 46
3
INVENTORY OF CONTENTS
1. Wireless Weather Station
2. Thermo/hygro transmitter (TX29UD-TH-IT)
3. Instruction manual
INSTANT TRANSMISSION is the state-of-
the-art new wireless transmission
technology, exclusively designed and
developed by LA CROSSE
TECHNOLOGY. INSTANT
TRANSMISSION offers you an
immediate update (every 4 seconds!) of
all your outdoor data measured from the
transmitters: follow your climatic
variations in real-time!
This product offers:
4
Foldable
stands
LCD
Displa
y
Function keys
FEATURES:
The Weather Station
xWWVB Radio controlled time with manual setting option
xTime reception ON/OFF (user selectable)
x12/24 hour time display
xTime zone option ±12 hours
xDaylight saving time (DST On/Off)
Battery
compartment
Hanging
hole
5
xWeekday and day calendar display (year and month only in setting
mode)
xAlarm setting with snooze function
xDisplay 12 Moon phases throughout the year
xWeather forecasting with weather tendency indicator
xIndoor comfort indicator
xTemperature display in °F/°C
xIndoor and outdoor temperature display with MIN/MAX records and
time of reception
xHumidity data display as RH%
xIndoor and outdoor humidity display with MIN/MAX records
xRelative air pressure hPa/ inHg with adjustable reference value
xWeather icon sensitivity setting
xRelative air pressure history for the past 24 hours (electronic
barometer with barometric pressure trend)
xLCD contrast selectable
xCan receive up to 3 outdoor transmitters
xWireless transmission at 915 MHz
xSignal reception intervals at 4 seconds
xLow battery indicator
6
xTable standing or wall mounting
Thermo-Hygro Transmitter
xRemote transmission of outdoor
temperature and humidity to weather station
by 915 MHz signals
xAlternate display of temperature and
humidity display
xWater-resistant casing
xWall mounting case. (Mount in a sheltered
place. Avoid direct rain and sunshine
SETTING UP
WHEN ONE TRANSMITTER IS USED
1. First, insert the batteries in the transmitter (see “How to install and
replace batteries in the Thermo-hygro outdoor transmitter” on
page 11).
2. Within 2 minutes of powering up the transmitter, insert the batteries
in the Weather Station (see “How to install and replace batteries
7
in the Weather Station” on pages 11-12). Once the batteries are
in place, all segments of the LCD will light up briefly and a short
signal tone will sound. Following the indoor temperature/humidity
and the time, as 12:00 will be displayed. If this information is not
displayed on the LCD after 60 seconds, remove the batteries and
wait for at least 60 seconds before reinserting them. Once the
indoor data is displayed user may proceed to the next step.
3. After the batteries are inserted, the Weather station will start
receiving data signal from the transmitter. The outdoor temperature
and humidity data should then be displayed on the Weather station.
If this does not happen after 2 minutes, the batteries will need to be
removed from both units and reset from step 1.
4. The distance between the Weather Station and the transmitter
should not be more than 300 feet to ensure sufficient 915 MHz
transmission. (see notes on “Positioning” and “915 MHz
Reception”).
Note:
In the event of changing batteries of the units, ensure the batteries do not
spring free from the contacts. Always wait at least 1 minute after
removing the batteries before reinserting, otherwise start up and
transmission problems may occur.
8
WHEN MORE THAN ONE TRANSMITTER IS USED
1. User shall remove all the batteries from the Weather Station and
transmitters, and wait 60 seconds.
2. Insert the batteries in the first transmitter.
3. Within 2 minutes of powering up the first transmitter, insert the
batteries in the Weather Station. Once the batteries are in place, all
segments of the LCD will light up briefly and a short signal tine will
sound. Following the indoor temperature/humidity and the time as
12:00 will be displayed. If this information is not displayed on the
LCD after 60 seconds, remove the batteries from both units and
wait for at least 60 seconds before reinserting them.
4. The outdoor temperature and humidity data from the first
transmitter (channel 1) and the signal reception icon should be
displayed on the Weather Station. If this does not happen after 2
minutes, the batteries will need to be removed from both units and
reset from step 1.
5. Insert the batteries in the second transmitter as soon as the signal
reception icon and outdoor data are displayed on the Weather
Station. Then within 2 minutes, the channel 2 outdoor data from the
second transmitter and the "channel 2" icon should be displayed on
the Weather Station. If this does not happen after 2 minutes, the
9
batteries will need to be removed from all the units and reset from
step 1.
Note : User shall insert the batteries into the second transmitter
within 45 seconds after the Weather Station displays the
information of the first transmitter.
6. Insert the batteries in the third transmitter as soon as the "channel
2" icon and outdoor data are displayed on the Weather Station.
Then within 2 minutes, the channel 3 outdoor data from the third
transmitter will be displayed and the channel icon will shift back to
"1" once the third transmitter is successfully received. If this is not
happen, user shall restart the setting up from step 1.
Note : User shall insert the batteries into the third transmitter within
45 seconds after the Weather Station displays the information of
the first transmitter. Or immediately after reception of the second
transmitter is finished.
7. The distance between the Weather Station and the transmitter
should not be more than 300 feet to ensure sufficient 915 MHz
transmission. (see notes on “Positioning” and “915 MHz
Reception”).
10
IMPORTANT:
Transmission problems will arise if the setting for additional sensors is not
followed as described above. Should transmission problems occur, it is
necessary to remove the batteries from all units and start again the set-up
from step 1.
Note:
xIf the signal reception is not successful on the first frequency of
915MHz for 45 seconds, the frequency is changed to 920MHz and
the learning is tried for another 45 seconds. If it is still not
successful the reception is tried for 45 seconds on 910MHz. This
will also be done during re-synchronization.
xWhen the weather station is receiving the WWVB time signal, the
outdoor transmitter data signal will temporarily not be received by
the weather station. During this short period of time, the outdoor
readings shown on the weather station will not be renewed until the
WWVB time signal is successfully received.
11
TO INSTALL AND REPLACE BATTERIES IN THE THERMO-
HYGRO TRANSMITTER
The Thermo-Hygro Transmitter uses 2 x AA, IEC, LR6,
1.5V batteries. To install and replace the batteries,
please follow the steps below:
1. Remove the cover.
2. Insert the batteries, observing the correct polarity
(see marking).
3. Replace the battery cover.
Note:
In the event of changing batteries in any of the units, all units need to be
reset by following the setting up procedures. This is due to a random
security code assigned by the transmitter at start-up. This code must be
received and stored by the Weather Station in the first 3 minutes of power
being supplied to the transmitter.
TO INSTALL AND REPLACE BATTERIES IN THE WEATHER
STATION
The Weather Station uses 2 x C, IEC LR14, 1.5V batteries. To install and
replace the batteries, please follow the steps below:
12
1. Insert finger or other solid object in the space at the bottom center
of the battery compartment and lift up to remove the cover.
2. Insert batteries observing the correct polarity (see marking).
3. Replace compartment cover.
BATTERY CHANGE:
It is recommended to replace the batteries in all units on an annual basis
to ensure optimum accuracy of these units.
Produktspezifikationen
| Marke: | La Crosse Technology |
| Kategorie: | Wetterstation |
| Modell: | WS-9047TWC-IT |
Brauchst du Hilfe?
Wenn Sie Hilfe mit La Crosse Technology WS-9047TWC-IT benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Wetterstation La Crosse Technology
8 Oktober 2024
30 September 2024
29 September 2024
23 September 2024
22 September 2024
13 September 2024
12 September 2024
12 September 2024
11 September 2024
11 September 2024
Bedienungsanleitung Wetterstation
- Wetterstation Clatronic
- Wetterstation Hama
- Wetterstation Lexibook
- Wetterstation Nedis
- Wetterstation Tchibo
- Wetterstation Clas Ohlson
- Wetterstation Cotech
- Wetterstation Profile
- Wetterstation Adler
- Wetterstation Camry
- Wetterstation Velleman
- Wetterstation ADE
- Wetterstation Alecto
- Wetterstation Auriol
- Wetterstation Beurer
- Wetterstation Bresser
- Wetterstation Cresta
- Wetterstation Day
- Wetterstation Denver
- Wetterstation Dexford
- Wetterstation Durabase
- Wetterstation ECG
- Wetterstation EMOS
- Wetterstation Eurochron
- Wetterstation Gira
- Wetterstation HomeMatic
- Wetterstation Irox
- Wetterstation Jacob Jensen
- Wetterstation Kemot
- Wetterstation König
- Wetterstation MarQuant
- Wetterstation Mebus
- Wetterstation Medisana
- Wetterstation Mesko
- Wetterstation National Geographic
- Wetterstation Prologue
- Wetterstation Renkforce
- Wetterstation Sempre
- Wetterstation Techno Line
- Wetterstation Technoline
- Wetterstation Telefunken
- Wetterstation TFA
- Wetterstation ThinkGizmos
- Wetterstation Thomson
- Wetterstation Trevi
- Wetterstation Ventus
- Wetterstation Weinberger
- Wetterstation Ytora
- Wetterstation Trotec
- Wetterstation Blaupunkt
- Wetterstation Braun
- Wetterstation Rocktrail
- Wetterstation Daewoo
- Wetterstation Pyle
- Wetterstation Muse
- Wetterstation Avidsen
- Wetterstation Elro
- Wetterstation GoGEN
- Wetterstation Hyundai
- Wetterstation Orion
- Wetterstation Livoo
- Wetterstation Perel
- Wetterstation Soehnle
- Wetterstation Balance
- Wetterstation Fysic
- Wetterstation Sencor
- Wetterstation Krontaler
- Wetterstation Honeywell
- Wetterstation MINOX
- Wetterstation Lowrance
- Wetterstation Globaltronics
- Wetterstation ELV
- Wetterstation Guardo
- Wetterstation Unitec
- Wetterstation Netatmo
- Wetterstation Ascot
- Wetterstation Theben
- Wetterstation Brandson
- Wetterstation Tanita
- Wetterstation JUNG
- Wetterstation Johnson
- Wetterstation OBH Nordica
- Wetterstation Optex
- Wetterstation Davis
- Wetterstation Levenhuk
- Wetterstation Vitek
- Wetterstation Prestigio
- Wetterstation EQ-3
- Wetterstation EVE
- Wetterstation Extech
- Wetterstation Daikin
- Wetterstation Fluke
- Wetterstation Oregon Scientific
- Wetterstation Homematic IP
- Wetterstation EQ3
- Wetterstation Elgato
- Wetterstation Digi-tech
- Wetterstation DMV Electronics
- Wetterstation Ea2 LABS
- Wetterstation EMOS SELECT
- Wetterstation Garni
- Wetterstation Hesdo
- Wetterstation Inovalley
- Wetterstation IT
- Wetterstation Kaindle
- Wetterstation La Crosse
- Wetterstation Meade
- Wetterstation Nasa
- Wetterstation Nor-tec
- Wetterstation Otio
- Wetterstation Paget Trading
- Wetterstation PCE Instruments
- Wetterstation Saphir
- Wetterstation Saxon
- Wetterstation Taylor
- Wetterstation Thierry Mugler
- Wetterstation UPM
- Wetterstation Uzoli
- Wetterstation Waldbeck
- Wetterstation Xeecom ApS
- Wetterstation TFA Dostmann
- Wetterstation Vimar
- Wetterstation PeakTech
- Wetterstation AcuRite
- Wetterstation Ease Electronicz
- Wetterstation Chauvin Arnoux
- Wetterstation YONO
- Wetterstation Brigmton
- Wetterstation Chacon
- Wetterstation Baldr
- Wetterstation Garin
- Wetterstation ChiliTec
- Wetterstation Global Water
- Wetterstation Greisinger
- Wetterstation Marathon
- Wetterstation Majestic
- Wetterstation Gewiss
- Wetterstation ClimeMET
- Wetterstation Buienradar
- Wetterstation Balance Meteo
- Wetterstation Rebel
- Wetterstation JDC
- Wetterstation Greenure
- Wetterstation Browin
- Wetterstation Setti+
- Wetterstation Bearware
Neueste Bedienungsanleitung fĂĽr -Kategorien-
15 Oktober 2024
5 Oktober 2024
3 Oktober 2024
2 Oktober 2024
29 September 2024
24 September 2024
24 September 2024
22 September 2024
22 September 2024
21 September 2024