La Crosse Technology WS-9711U-IT Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für La Crosse Technology WS-9711U-IT (13 Seiten) in der Kategorie Wetterstation. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/13
1
Contents
Language Page
___________________________________________________________
English 2
French 53
Spanish 103
2
WIRELESS 915 MHz TEMPERATURE STATION
Instruction Manual
TABLE OF CONTENTS
Topic Page
Inventory of Contents 3
Features 4
Setting Up 6
WWVB Radio Controlled Time 9
Battery Installation 10
Function Keys 12
LCD Screen and Settings 14
Manual Settings 18
Alarm setting 33
Weather Forecast and Tendency 34
Display of Temperature and Humidity Readings 38
Sunrise, sunset, sun duration 41
Moon phases 42
915 MHz Reception 43
Positioning 44
3
Care and maintenance 46
Specifications 47
Warranty 48
FCC Disclaimer 51
INVENTORY OF CONTENTS
1. Wireless Temperature Station WS-9711U-IT
2. Wireless Temperature Transmitter TX29U-IT
3. Instruction Manual
INSTANT TRANSMISSION is the state-of-
the-art new wireless transmission
technology, exclusively designed and
developed by LA CROSSE TECHNOLOGY.
INSTANT TRANSMISSION oers you an
immediate update (every 4 seconds!) of all
your outdoor data measured from the
transmitters: follow your climatic
variations in real-time!
This product offers:
4
LCD Display
Function Keys
FEATURES:
The Weather Station
WWVB Radio controlled time with manual setting options
WWVB Time reception ON/OFF
12/24 hour display
Hour, minute and second time display
Calendar (weekday, date, month and year)
Foldout Stand
Battery compartment cover
Function Keys
Hanging hole
5
Time zone option ±12 hours
Alarm with snooze function
Daylight saving time (DST) function
Weather forecasting with 15 easy-to-read weather forecast signs featured by
"Weather girl"
Weather forecasting icon sensitivity setting
Temperature display in Fahrenheit (°F) or degrees Celsius (°C) selectable
Indoor and outdoor temperature display with MIN/MAX recording
Indoor humidity reading displayed as RH% with MIN/MAX recordings
All MIN/MAX temperature recordings show date and time received
All MIN/MAX recordings can be reset
Display of sunrise time, sunset time and sun duration in 99 cities
12 Moon phases display throughout the year
Can take up to three outdoor transmitters
LCD contrast setting
Low battery indicator
LED backlight
Table standing/ Wall mounting
6
The Outdoor Temperature Transmitter (TX29U-IT)
Remote transmission of outdoor temperature to Weather
Station by 915 MHz
Water resistant casing
Wall mounting case (Mounting at a sheltered place. Avoid
direct rain and sunshine)
Note: Sensor must be outside to transmit outdoor temperature.
The sensor reads data from the environment it is currently in.
SETTING UP:
When one transmitter is used
1. First, insert the batteries into the Temperature transmitter (see “Install and replace
batteries in the Temperature transmitter“).
2. Immediately after and within 30 seconds, insert the batteries into Weather station (see
Install and replace batteries in the Weather station
”). Once the batteries are in
place, all segments of the LCD will light up briefly. Next, the time shows 12:00 and the
"Weather girl" icon will be displayed. If these are not displayed after 60 seconds,
remove the batteries and wait for at least 10 seconds before reinserting them.
3. After inserting the batteries, the Weather station will start receiving data from the
transmitter. The outdoor temperature and the signal reception icon should then be
7
displayed on the Weather station. If this does not happen after 3 minutes, the batteries
will need to be removed from both units and reset from step 1.
4. In order to ensure sufficient 915 MHz transmission however, this should under good
conditions be a distance no more than 330 feet (100 meters) in open air between the
final position of the Weather Station and the transmitter (see notes on “Positioning
and “915 MHz Reception).
5. Once the remote temperature has been received and displayed on the Weather
station, the WWVB time (radio controlled time) code reception is automatically started.
This takes typically between 3-5 minutes in good conditions. If after 10 minutes, the
WWVB time has not been received, press the SET key to manually enter a time
initially.
When more than one transmitter is used
1. User shall remove all the batteries from the Weather Station and transmitters and wait
for 60 seconds if setting has been done with one transmitter before.
2. Insert the batteries to the first transmitter.
3. Within 30 seconds of powering up the first transmitter, insert the batteries to the
Weather Station. Once the batteries are in place, all segments of the LCD will light up
briefly. Following this, the time (shown as 12:00) and the weather girl icon will be
displayed. If they are not shown in the LCD after 60 seconds, remove the batteries
and wait for at least 60 seconds before reinserting them.
4. The outdoor temperature from the first transmitter (channel 1) should then be
displayed on the Weather station. Also, the signal reception icon will be displayed. If
8
this does not happen after 2 minutes, the batteries will need to be removed from both
units and reset from step 1.
5. Insert the batteries to the second transmitter as soon as the outdoor temperature
readings from the first transmitter are displayed on the Weather station.
Note: User must insert the batteries into the second transmitter within 10 seconds of
reception of the first transmitter.
6. The outdoor data from the second transmitter and the "channel 2" icon should then be
displayed on the Weather station. If this does not happen after 2 minutes, the batteries
will need to be removed from all the units and reset from step 1.
7. Insert the batteries in the third transmitter as soon as the "channel 2" icon and outdoor
data are displayed on the Weather station. Within 2 minutes, the channel 3 outdoor
data from the third transmitter will be displayed and the channel icon will shift back to
"1". If this does not happen, you must restart from step 1.
Note: User must insert the batteries into the third transmitter within 10 seconds of
reception of the second transmitter.
8. In order to ensure sufficient 915 MHz transmission however, this should under good
conditions be a distance no more than 330 feet (100 meters) in open air between the
final position of the Weather Station and the transmitter (see notes on “Positioning
and “915 MHz Reception).
9. Once the remote temperature has been received and displayed on the Weather
station, the WWVB time (radio controlled time) code reception is automatically started.
This takes typically between 6-8 minutes in good conditions.
9
IMPORTANT:
Transmission problems will arise if the setting for additional sensors is not followed as
described above. Should transmission problems occur, it is necessary to remove the
batteries from all units and start the setup again from step 1.
Note: Daily WWVB reception (Atomic time) is attempted at the top of each hour between
12:00 am to 6:00 am. If the reception is successful, there is no reception attempt until the
following day. When this is successful, the received time will override the manually set time.
The date is also updated with the received time. (Please also refer to the notes on “WWVB
Radio Controlled time” and “Manual Time Setting”)
WWVB RADIO CONTROLLED TIME
The NIST (National Institute of Standards and Technology – Time and Frequency Division
WWVB radio station is located in Ft. Collins, Colorado, and transmits the exact time signal
continuously throughout the United
States at 60 kHz. The signal
can be received up to 2,000
miles away through the internal antenna in the Wireless Weather Station. However, due to
the nature of the Earth’s ionosphere, reception is very limited during daylight hours. The
Wireless Weather Station will search for a signal every night when reception is best. The
WWVB radio station receives the time data from the NIST Atomic clock in Boulder,
Colorado. A team of atomic physicists is continually measuring every second, of every day,
to an accuracy of ten billionths of a second per day. These physicists have created an
international standard, measuring a second as 9.192.631.770 vibrations of a Cesium-133
atom in a vacuum. This atomic clock regulates the WWVB transmitter.
10
Note
:
If the WWVB tower icon flashes on the top left of the LCD, but does not set the time
or the tower does not appear at all, then please note the following:
Recommended distance from any interfering sources like computer monitors or TV
sets is a minimum of 6 feet (2 meters).
With ferro-concrete rooms (basements, superstructures), the received signal is
naturally weakened. In extreme cases, please place the unit close to a window and/ or
point its front or back towards the Fort Collins, Colorado transmitter.
During nighttime, the atmospheric disturbances are usually less severe and reception
is possible in most cases. A single daily reception is adequate to keep the accuracy
deviation below 1 second.
In case the Weather Station is not able to detect the WWVB-signal (disturbances,
transmitting distance, etc.), the time can be manually set (please refer to the notes on
Manual time setting).
INSTALL OR REPLACE BATTERIES IN THE WEATHER STATION
The Weather Station uses 2 x AA, IEC LR6, 1.5V batteries. To install or replace the
batteries, please follow the steps below:
1. Remove the cover at the back of the Weather Station.
2. Insert batteries observing the correct polarity (see
marking).
3. Replace compartment cover.
11
INSTALL OR REPLACE BATTERIES IN THE TEMPERATURE TRANSMITTER
The Temperature Transmitter uses 2 x AA, IEC LR6 and a 1.5V battery.
To install or replace the batteries, please follow the steps below:
1. Remove the battery compartment cover at the back of the
transmitter.
2. Insert the batteries, observing the correct polarity (see marking).
3. Replace the battery compartment cover on the unit.
Note:
When changing batteries in any of the units, all units need to be reset
by following the setup procedures. This is because a random security
code is assigned by the transmitter at start-up and this code must be received and stored by
the Weather station in the first 3 minutes of power being supplied to it.
BATTERY CHANGE:
It is recommended to replace the batteries in all units regularly to ensure optimum accuracy
of these units (Battery life See Specifications below).
Please participate in the preservation of the environment. Return used
batteries to an authorized depot.
12
FUNCTION KEYS:
Weather Station:
SET:
This key is used to:
Enter the set mode for the following functions: LCD contrast, Time zone, Daylight
saving time ON/OFF, Time Reception ON/OFF, 12/24 hour display, Manual time,
Year, Month, Date, Sunrise/ Sunset city location, Snooze time duration, °F/°C, and
Weather forecast sensitivity settings.
Toggle between the display of "Weekday + date + month", "Second", "Alarm time",
and "Date + month + year".
SET key
MIN/ MAX ke
y
A
LM key
SNOOZE/ SUN key
CH/ + key


Produktspezifikationen

Marke: La Crosse Technology
Kategorie: Wetterstation
Modell: WS-9711U-IT

Brauchst du Hilfe?

Wenn Sie Hilfe mit La Crosse Technology WS-9711U-IT benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Wetterstation La Crosse Technology

Bedienungsanleitung Wetterstation

Neueste Bedienungsanleitung für -Kategorien-