La Crosse Technology WS-9215U-IT Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung fĂŒr La Crosse Technology WS-9215U-IT (11 Seiten) in der Kategorie Wetterstation. Dieser Bedienungsanleitung war fĂŒr 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/11
1
LCD
display
WEATHER STATION
WS-9215U-IT
Instruction Manual
INVENTORY OF CONTENTS
1. Wireless Temperature Station
2. Wireless Temperature Sensor (TX40U-IT) and mounting bracket.
3. Instruction Manual
The Weather Station:
Features:
12/24 hour display
Calendar (year, month and day display in setting mode only)
Temperature display in degrees Celsius (ÂșC) or Farenheit (ÂșF)
Indoor and outdor temperature with MIN/MAX records
Manual reset of MIN/MAX records
3 weather forecast icons with weather tendency indicator
Wireless transmission at 915 MHz
Signal reception interval at 4 seconds
Low battery indicators
Wall mounting or table standing (detachable stand)
The Outdoor Temperature Transmitter
Remote transmission of outdoor temperature to weather station by 915 MHz
signals
Water resistant casing
Wall mounting and table-standing
Function
keys
Hanging hole
Battery
compartment
cover
Detachable stand
INSTANT TRANSMISSION is the state- - -art new of the
wireless transmission technology, exclusively designed
and developed by LA CROSSE TECHNOLOGY.
INSTANT
TRANSMISSION
oïŹ€ers you an immediate update (every 4
seconds!) of all your outdoor data measured from the
transmitters: follow your climatic variations in real-time!
:
2
SET UP:
Note: This weather station receives only one outdoor transmitter.
Do not mix old and new batteries. Do not mix alkaline, standard, or rechargeable batteries.
1. First, insert the batteries into the temperature transmitter. (see “Install and replace batteries in the
temperature transmitter“).
2. Within 30 seconds, insert the batteries into Iweather station (see “ nstall and replace batteries in the
weather station”). Once the batteries are in place, all segments of the LCD will light up brieïŹ‚y. Then
the time (default 12:00) and the weather icon will be displayed. If these are not displayed after 60
seconds, remove the batteries and wait for at least 60 seconds before reinserting them.
3. After inserting the batteries, the weather station will start receiving data from the transmitter. The
outdoor temperature and the signal reception icon should then be displayed on the weather station. If
this does not happen after 3 nutes, the batteries will need to be removed from both units and reset mi
from step 1.
4. In order to ensure successful 915 MHz transmission, this should under good conditions be a distance
no more than 330 feet/100 meters between the ïŹnal position of the weath station and the er
transmitter (see notes on “ ” and “Mounting 915 MHz Reception”).
INSTALL AND REPLACE BATTERIES IN THE WEATHER STATION
The weather station uses 2 x AA, IEC LR6, 1.5V batteries. When batteries need
to be replaced, the low battery icon will appear on the LCD. To install and replace
the batteries, please follow the steps below:
1. Lift up the battery compartment cover.
2. Insert batteries observing the correct polarity (see marking).
3. Replace compartment cover.
INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE TRANSMITTER
The temperature transmitter uses 2 x AAA, IEC LR3, 1.5V batteries. To install and replace the batteries,
please follow the steps below:
1. Remove the battery compartment cover at the back of the transmitter.
2. Insert the batteries, observing the correct polarity (see marking).
3. Replace the battery compartment cover on the unit.
Note: When changing batteries in any of the units, all units need to reset by following the
setting up procedures. This is because the transmitter at start-up assigns a security code
and this code must be received and stored by the Weather station in the ïŹrst 3 minutes of power supplied
to it.
BATTERY CHANGE:
It is recommended to replace the batteries in all units regularly to ensure optimum accuracy of these units
(Battery life see ). “ ”SpeciïŹcations
Please participate in the preservation of the environment. Return used batteries to an
authoriz depot. ed
3
Outdoor reception Signal icon *
FUNCTION KEYS:
Weather station:
The weather station has four easy to use function keys.
SET key
Press and hold to enter manual setting modes: 12/24 hour time manual time, calendar, Âș , F/ÂșC
temperature unit setting
+ key
T change any values in manual set modes o
INDOOR/RESET key
To display indoor MIN/MAX temperature records
Press and hold to reset indoor and outdoor MIN/MAX temperature records all
OUTDOOR key
To display outdoor MIN/MAX temperature records
L SCREEN: CD
SET key
INDOOR/RESET key
+ key
OUTDOOR key
Indoor
temperature
in °F/ÂșC
Outdoor
temperature in
°F/ÂșC
Weather tendency
indicator
Low battery indicator
(weather station)
Maximum icon
Time
Weather forecast icon
Low battery indicator
(transmitter)
Minimum icon


Produktspezifikationen

Marke: La Crosse Technology
Kategorie: Wetterstation
Modell: WS-9215U-IT

Brauchst du Hilfe?

Wenn Sie Hilfe mit La Crosse Technology WS-9215U-IT benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Wetterstation La Crosse Technology

Bedienungsanleitung Wetterstation

Neueste Bedienungsanleitung fĂŒr -Kategorien-