La Crosse Technology WS-9133U-IT Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für La Crosse Technology WS-9133U-IT (6 Seiten) in der Kategorie Wetterstation. Dieser Bedienungsanleitung war für 21 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/6
1
WIRELESS 915 MHz WEATHER STATION
Instruction Manual
Contents
Language Pages
English 1
French 22
Spanish 43
2
TABLE OF CONTENTS
Topic Pa
g
e
Inventor
y
of Contents 2
Features 3
Settin
g
Up 4
Batter
y
Installation 5
Function ke
y
s 6
LCD Screen and Settin
g
s 8
Manual Settin
g
s 9
Alarm settin
g
and snooze 11
Weather forecast icons and tendenc
y
11
Indoor temperature and MIN/MAX records 14
Outdoor temperature and MIN/MAX records 14
Resettin
MIN/MAX records 14
915 MHz Reception 15
Mountin
g
16
Care and Maintenance 17
Specifications 18
Warrant
y
Information 19
INVENTORY OF CONTENTS
1. Wireless Temperature Station
2. Wireless Temperature Sensor (TX37U-IT) and mounting bracket
3. Instruction Manual
3
Battery
compartment
FEATURES:
The Weather station
Function
keys Foldout stand
Battery
compartment
cover
Hanging hole
This product offers: INSTANT TRANSMISSIO
N
is the state-of-the-art
new wireless transmission technology,
exclusively designed and developed by LA
CROSSE TECHNOLOGY. INSTANT
TRANSMISSION offers you an immediate
update (every 4 seconds!) of all your outdoor
data measured from the transmitters: follow
your climatic variations in real-time!
4
Time display (hour and minutes)
12/24 hour display Alarm function with snooze
Temperature display in degree Farenheit (ºF) or Celsius (°C)
Indoor and outdoor temperature with MIN/MAX records
Manual reset of MIN/MAX records
Weather forecast with weather tendency indicator
Wireless transmission at 915 MHz
Signal reception intervals at 4 seconds
Low battery indicator
Wall mounting or table standing (foldout stand)
The Outdoor Temperature Transmitter
Remote transmission of outdoor temperature to
Temperature Station by 915 MHz signals
Rain resistant casing
Wall mounting and table-standing
SETTING UP:
Note: This weather station receives only one outdoor transmitter.
1. First, insert the batteries into the Temperature transmitter. (see “Install
and replace batteries in the Temperature transmitter“).
2. Immediately after and within 30 seconds, insert the batteries into
Weather station (see “Install and replace batteries in the Weather
station”). Once the batteries are in place, all segments of the LCD will
5
light up briefly. Following the time as 12:00 and the weather icon will be
displayed. If these are not displayed after 60 seconds, remove the
batteries and wait for at least 10 seconds before reinserting them.
3. After inserting the batteries, the Weather station will start receiving data
from the transmitter. The outdoor temperature and the signal reception
icon should then be displayed on the Weather station. If this does not
happen after 3 minutes, the batteries will need to be removed from both
units and reset from step 1.
4. In order to ensure sufficient 915 MHz transmission however, this should
under good conditions be a distance no more than 100 meters (330
feet) between the final position of the Weather Station and the
transmitter (see notes on “Mounting” and “915 MHz Reception”).
HOW TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE
STATION
The Weather Station uses 3 x AA, IEC LR6, 1.5V batteries. When batteries
will need to be replaced, the
low battery icon will appear on
the LCD. To install and replace
the batteries, please follow the
steps below:
1. Lift up the battery
compartment cover.
2. Insert batteries observing
the correct polarity (see
marking).
3. Replace compartment
cover.
6
HOW TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE
TRANSMITTER
The Temperature Transmitter uses 2 x AA, IEC LR6,
1.5V battery. To install and replace the batteries,
please follow the steps below:
1. Remove the battery compartment cover at the
back of the transmitter.
2. Insert the batteries, observing the correct polarity
(see marking).
3. Replace the battery compartment cover on the
unit.
Note:
In the event of changing batteries in any of the units, all units need to be reset
by following the setting up procedures. This is because a security code is
assigned by the transmitter at start-up and this code must be received and
stored by the Weather station in the first 3 minutes of power being supplied to
it.
BATTERY CHANGE:
It is recommended to replace the batteries in all units regularly to ensure
optimum accuracy of these units (Battery life See Specifications below).
Please participate in the preservation of the environment.
Return used batteries to an authorized depot.
FUNCTION KEYS:
Weather station:
The weather station has four easy to use function keys.
7
SET key
Press the key to enter manual setting modes: time, 12/24 hour time
display, and temperature unit (ºC/ºF) setting
Stop the alarm
+ key
To make adjustment for various settings
Stop the alarm
ALARM key
Enter the alarm setting mode
Switch the alarm ON/ OFF
Stop the alarm
MIN/MAX RESET key
Press and hold to reset the MIN/MAX temperature records
Activate the snooze
Exit manual setting modes
SET ke
y
MIN/MAX RESET key
A
LARM key
+ ke
y
8
Outdoor
Reception
Signal icon*
MIN/MAX indoo
r
temperature
MIN/MAX outdoor
temperature
LCD SCREEN AND SETTINGS:
* When the outdoor signal is successfully received by the Weather Station,
this icon will be switched on. (If not successful, the icon will not be shown in
LCD) So user can easily see whether the last reception was successful (icon
on) or not (icon off).
For a better display clarity, the LCD screen is split into 3 sections.
Section 1 - TIME AND ALARM
Display of time
Time
Indoo
r
Temperature
in °C/ °F
Outdoor
Temperature
in °C/ °F
Weathe
r
tendenc
y
indicato
r
Weather
forecast icon
Low batter
y
indicato
r
(weathe
r
station)
Low battery
indicator
(transmitter)
Alarm icon
9
Minutes (flashing)
Hours (flashing)
Display the alarm icon will be shown when the alarm is turned on. Or
when the snooze function is activated, the alarm icon will be flashing.
Section 2 - WEATHER FORECAST AND WEATHER TENDENCY ICONS
Display of the weather to be expected in form of three weather symbols
and two weather tendency indicators in form of an arrow, which change
their appearance depending on the air pressure development
Section 3 – INDOOR AND OUTDOOR TEMPERATURE
Display the current indoor temperature with MIN/MAX records
Display of low battery indicator (weather station)
Display the current outdoor temperature with MIN/MAX records
A signal reception symbol will be shown indicating that receiver is
receiving outdoor temperature
Display of low battery indicator (transmitter)
MANUAL SETTINGS:
The following manual settings can be done in the setting mode:
Time
12/24 time format
Temperature unit setting
Press and hold the SET key for about 3 seconds to advance to the setting
mode:
MANUAL TIME SETTING
To set the clock:
1. The hour digits start flashing in the time display section.
10
Flashing
2. Use the + key to adjust the hours and then press SET key to go to the
minute setting.
3. The minute will be flashing. Press the + key to just the minutes.
4. Confirm with the SET key and the enter the 12/24 hour time display
setting
12/24 HOUR TIME DISPLAY SETTING
The time can be set to display in 12h or 24h time format. Default setting 12h
time format. To change the setting:
1. The current time format starts flashing
2. Use the + key to select 12h or 24h time display.
3. Confirm with the SET key and enter the Temperature unit setting.
TEMPERATURE UNIT SETTING (ºF/ºC):
The temperature unit can set to display temperature data in degree
Fahrenheit (ºF) or Celsius (ºC); default setting is ºF. To change the setting:
1. The current temperature value starts flashing.
2. Use the + key to change the unit.
3. Confirm with the SET key and exit the setting mode.
Flashing
11
Alarm icon (ON)
A
larm time
ALARM SETTING
To set alarm:
1. Press and hold ALARM for about 3 seconds until the alarm time display
flashes.
2. The hour digit and the alarm icon will be flashing. Press the + key to
adjust the hour.
3. Press ALARM button once and minute digit will be flashing. User shall
then press + button to set the minute.
4. Press ALARM button once to confirm the setting.
5. To activate/ deactivate the alarm function, press the ALARM button
once. The display of the alarm icon represents that the alarm is "ON".
Note: The duration of alarm sounding is 85 seconds
TO ACTIVATE THE SNOOZE FUNCTION AND STOPPING THE ALARM:
1. When the alarm is sounding, press the MIN/MAX RESET key to
activate the snooze function. The alarm will stop and re-activate after
the snooze interval of 10 minutes.
2. To stop the alarm completely, press any keys other than the MIN/MAX
RESET key.
WEATHER FORECAST AND TENDENCY
THE WEATHER FORECASTING ICONS :
There are 3 weather icons in the second section of LCD which can be
displayed in any of the following combinations :
12
For every sudden or significant change in the air pressure, the weather icons
will update accordingly to represent the change in weather. If the icons do not
change, then it means either the air pressure has not changed or the change
has been too slow for the Weather station to register. However, if the icon
displayed is a sun or raining cloud, there will be no change of icon if the
weather gets any better (with sunny icon) or worse (with rainy icon) since the
icons are already at their extremes.
The icons display weather forecasts in terms of getting better or worse, and
not necessarily sunny or rainy as each icon indicates. For example, if the
current weather is cloudy and the rainy icon is displayed, it does not mean
that the product is faulty because it is not raining. It simply means that the air
pressure has dropped and the weather is expected to get worse but not
necessarily rainy.
Note :
After setting up, readings for weather forecasts should be disregarded for the
next 48-60 hours. This will allow sufficient time for the Weather Station to
collect air pressure data at a constant altitude and therefore result in a more
accurate forecast.
Common to weather forecasting, absolute accuracy cannot be guaranteed.
The weather forecasting feature is estimated to have an accuracy level of
about 75% due to the varying areas the Weather Station has been designed
Rainy
Cloudy with
sunny intervals
Sunny


Produktspezifikationen

Marke: La Crosse Technology
Kategorie: Wetterstation
Modell: WS-9133U-IT

Brauchst du Hilfe?

Wenn Sie Hilfe mit La Crosse Technology WS-9133U-IT benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Wetterstation La Crosse Technology

Bedienungsanleitung Wetterstation

Neueste Bedienungsanleitung für -Kategorien-