La Crosse Technology WS-9066U-IT Bedienungsanleitung
La Crosse Technology
Wetterstation
WS-9066U-IT
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für La Crosse Technology WS-9066U-IT (6 Seiten) in der Kategorie Wetterstation. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/6
1
LCD
Display
Function keys
WS-9066U-IT
WEATHER STATION
Instruction Manual
INTRODUCTION:
Congratulations on purchasing this state-of-the-
art weather station as an example of innovative
design and quality piece of engineering.
Provides time, calendar, weather forecast, moon
phase, indoor and outdoor temperature, indoor
and outdoor relative humidity. This unit will
never keep you guessing on current and future
weather conditions. Operation of this product is
simple and straightforward. By reading this
operating manual, the user will receive a better
understanding of the Weather Station.
FEATURES:
The Weather Station
2
Stand
Function keys
x 12/24 hour time display
x Calendar display (year only in setting
mode)
x Display 8 Moon phases throughout the
year
x Temperature display in ºC/ ºF
x Indoor and outdoor temperature display
with MIN/MAX records
x Indoor and outdoor humidity display
x Humidity data display as RH%
x Low battery indicator
x Table standing or wall mounting
Battery
compartment
Hanging
hole
3
Thermo-Hygro Transmitter
x Wall mount bracket
x Mounting at a sheltered place.
x Avoid direct rain and sunshine
DO NOT MIX OLD AND NEW BATTERIES.
DO NOT MIX ALKALINE, STANDARD, OR
RECHARGEABLE BATTERIES
TO INSTALL AND REPLACE BATTERIES
IN THE THERMO-HYGRO TRANSMITTER
The outdoor thermo-hygro transmitter uses 2 x
AAA, IEC LR3, 1.5V batteries. To install and
replace the batteries, please follow the steps
below:
1. Remove the battery cover.
2. Insert the batteries,
observing the correct polarity (see
battery compartment marking).
3. Replace the battery cover
on the unit.
Note:
In the event of changing batteries
in any of the units, all units need
to be reset by following the setting up
procedures. This is due to a random security
Wall mount
bracket
Remote transmission of outdoor
temperature and humidity to
weather station by 915MHz
4
code assigned by the transmitter at start-up.
This code must be received and stored by the
weather station in the first 3 minutes of power
being supplied to the transmitter.
TO INSTALL AND REPLACE BATTERIES
IN THE WEATHER STATION
The weather station uses 2 x AAA, IEC LR3,
1.5V batteries. To install and replace the
batteries, please follow the steps below:
1. Insert finger or
other solid object in
the space at the
bottom center of the
battery compartment
and lift up to remove
the cover.
2. Insert batteries
observing the correct
polarity (see marks).
3. Replace compartment cover.
BATTERY CHANGE:
It is recommended to replace the batteries in all
units on an annual basis to ensure optimum
accuracy of these units.
Please participate in the
preservation of the environment.
Return used batteries to an
authorized depot.
5
SET UP
1. First, insert the batteries in the transmitter
(see “To install and replace batteries in
the thermo-hygro transmitter” above).
Keep 5-10 feet from the display for 15
minutes during set up.
2. Within 2 minutes of powering up the
transmitter, insert the batteries in the
Temperature Station (see “To install and
replace batteries in the weather
station” above). Once the batteries are in
place, all segments of the LCD will light up
briefly. Following, the indoor
temperature/humidity and the time, as
12:00 will be displayed. If this information
is not displayed on the LCD after 60
seconds, remove the batteries and wait
for at least 60 seconds before reinserting
them. Once the indoor data is displayed
user may proceed to the next step.
3. After the batteries are inserted, the
weather station will start receiving data
signal from the transmitter. The outdoor
temperature and humidity data should be
displayed on the weather station. If this
does not happen after 2 minutes, the
batteries will need to be removed from
both units and reset from step 1.
4. In order to ensure sufficient 915 MHz
transmission however, the distance
between the Weather Station and the
transmitter should not be more than 330
feet (100 meters) (see notes on
“Positioning” & “915 MHz reception”).
6
+ key
MIN/MAX
key
SET key
Note:
When changing batteries in the units, ensure the
batteries do not spring free from the contacts.
Always wait at least 15 minutes after removing
the batteries before reinserting, otherwise start
up and transmission problems may occur.
FUNCTION KEYS:
Weather Station:
The Weather Station has 3 easy to use function
keys: 1 key on the front, and 2 keys on the back
SET key
x Press and hold the key to enter manual
setting modes: manual time setting, and
calendar
7
Moon
phase
icon
Calendar
Indoor
relative
humidity
in RH%
Indoor
temperature
in ºC/ºF
Outdoor data signal
reception indicator*
Outdoor
temperature
in ºC/ºF
Outdoor
relative
humidity
in RH%
Low battery
indicator
(weather
station)
Low battery
indicator
(transmitter)
Time
+ key
x Increase, change, toggle all values in
manual set mode
MIN/MAX key
x Press shortly to toggle between indoor
and outdoor MAX/MIN temperature and
current temperature
LCD SCREEN
The LCD screen is split into 4 sections
displaying the information for time/calendar,
moon phase, indoor data, and outdoor data.
* When the signal is successfully received by the
weather station, the outdoor transmission icon
8
will be switched on. (If not successful, the icon
will not be shown on LCD). The user can then
easily see whether the last reception was
successful (icon on) or not (icon off).
MANUAL SETTINGS:
The following manual settings can be changed
when pressing the key for: SET
x 12/24 time display setting
x Manual time setting
x Calendar setting
x ºF/ºC temperature display setting
12/24 HOUR TIME DISPLAY SETTING
To set the time format in 12h or 24h display:
1. “12h” or “24h” will flash. (default 12h)
2. Press the + key to select the “12h” or
“24h” display mode.
3. Confirm with the SET key and enter the
“Manual time setting”.
Note:
When 12h mode display is selected, the
calendar format will be "Month. Day" display.
When 24h mode display is selected, the
calendar format will be "Day. Month" display.
flashing
9
MANUAL TIME SETTING:
To set the time.
1. The hour digit will flash.
2. Use the + key to set the hour.
3. Press again the SET key to set the
minutes. The minute digits will flash.
4. Use the + key to set the minutes.
5. Confirm with the SET key and enter the
Calendar setting.
CALENDAR SETTING:
The date default of the weather station is 1. 1.
2011. To set the calendar:
1. The year will flash.
2. Use the + key to set the year (between
year 2011-2039).
Hour flashing
Minutes flashing
Year
Date and month
10
3. Press the SET key again to confirm and to
enter the month setting. The month will
flash.
4. Use the + key to set the month.
5. Press the SET key again to confirm and to
enter the date setting mode. The date will
flash.
6. Use the + key to set the date.
7. Confirm all calendar settings with the SET
key and “ºF/ºC temperature display
setting”.
°F/°C TEMPERATURE UNIT SETTING
The default temperature display is set to °F
(degree Fahrenheit). To select °C (degree
Celsius):
1. The “°F or qC ” will flash.
2. Use the + key to toggle between “°C” and
“°F”.
3. Once the desired temperature unit has
been chosen, confirm with the key SET
and exit the setting mode.
TO EXIT THE MANUAL SETTING MODE
To exit the manual setting mode anytime during
the manual setting, wait for automatic timeout.
The mode will return to normal time display.
flashing
11
Indoor
relative
humidity
in RH%
Indoor
temperature
in ºC/ºF
MOON PHASES SYMBOL
The moon icon of the weather station will also
display all 8-moon phases throughout the year
according to the set calendar. A bar segment
above the moon phase will indicate current
moon phase.
INDOOR TEMPERATURE/HUMIDITY DATA
The indoor temperature and humidity data are
automatically updated and displayed on the third
section of the LCD.
OUTDOOR TEMPERATURE/HUMIDITY
DATA
The last LCD section shows the outdoor
temperature and humidity, and the reception
indicator.
Bar segment (moon phase
indicator)
ew
oon
N
e
M
o
Waning
Crescent
rst
uarter
Waxing Gibbous
Fi
Qu
Waxing
Crescent
Last Quarter
bbo
us
Full
Moon
Last Q
Waning
Gibbous
12
Outdoor data signal
reception indicator
Outdoor
temperature
in ºC/ºF
Outdoor
relative
humidity
in RH%
VIEW AND RESET THE MIN/MAX DATA
VIEW THE MIN/MAX DATA
Press the MIN/MAX key several times to view
the MIN/MAX indoor temperature, and MIN/MAX
outdoor temperature sequentially.
RESET THE MIN/MAX DATA
Press and hold MIN/MAX key for 3 seconds
to reset all the indoor and outdoor
temperature to current temperatures.
LOW BATTERY INDICATOR
Low battery indicator is displayed on the LCD
when the batteries require changing.
ABOUT THE THERMO-HYGRO
TRANSMITTER
The temperature may affect the range of the
thermo-hygro transmitter. At cold temperatures
the transmitting distance may be decreased.
Please bear this in mind when positioning the
transmitters. Also the batteries may be reduced
in power for the thermo-hygro transmitter.
Low battery indicator
(transmitter)
Produktspezifikationen
| Marke: | La Crosse Technology |
| Kategorie: | Wetterstation |
| Modell: | WS-9066U-IT |
Brauchst du Hilfe?
Wenn Sie Hilfe mit La Crosse Technology WS-9066U-IT benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Wetterstation La Crosse Technology
8 Oktober 2024
30 September 2024
29 September 2024
23 September 2024
22 September 2024
13 September 2024
12 September 2024
12 September 2024
11 September 2024
11 September 2024
Bedienungsanleitung Wetterstation
- Wetterstation Clatronic
- Wetterstation Hama
- Wetterstation Lexibook
- Wetterstation Nedis
- Wetterstation Tchibo
- Wetterstation Clas Ohlson
- Wetterstation Cotech
- Wetterstation Profile
- Wetterstation Adler
- Wetterstation Camry
- Wetterstation Velleman
- Wetterstation ADE
- Wetterstation Alecto
- Wetterstation Auriol
- Wetterstation Beurer
- Wetterstation Bresser
- Wetterstation Cresta
- Wetterstation Day
- Wetterstation Denver
- Wetterstation Dexford
- Wetterstation Durabase
- Wetterstation ECG
- Wetterstation EMOS
- Wetterstation Eurochron
- Wetterstation Gira
- Wetterstation HomeMatic
- Wetterstation Irox
- Wetterstation Jacob Jensen
- Wetterstation Kemot
- Wetterstation König
- Wetterstation MarQuant
- Wetterstation Mebus
- Wetterstation Medisana
- Wetterstation Mesko
- Wetterstation National Geographic
- Wetterstation Prologue
- Wetterstation Renkforce
- Wetterstation Sempre
- Wetterstation Techno Line
- Wetterstation Technoline
- Wetterstation Telefunken
- Wetterstation TFA
- Wetterstation ThinkGizmos
- Wetterstation Thomson
- Wetterstation Trevi
- Wetterstation Ventus
- Wetterstation Weinberger
- Wetterstation Ytora
- Wetterstation Trotec
- Wetterstation Blaupunkt
- Wetterstation Braun
- Wetterstation Rocktrail
- Wetterstation Daewoo
- Wetterstation Pyle
- Wetterstation Muse
- Wetterstation Avidsen
- Wetterstation Elro
- Wetterstation GoGEN
- Wetterstation Hyundai
- Wetterstation Orion
- Wetterstation Livoo
- Wetterstation Perel
- Wetterstation Soehnle
- Wetterstation Balance
- Wetterstation Fysic
- Wetterstation Sencor
- Wetterstation Krontaler
- Wetterstation Honeywell
- Wetterstation MINOX
- Wetterstation Lowrance
- Wetterstation Globaltronics
- Wetterstation ELV
- Wetterstation Guardo
- Wetterstation Unitec
- Wetterstation Netatmo
- Wetterstation Ascot
- Wetterstation Theben
- Wetterstation Brandson
- Wetterstation Tanita
- Wetterstation JUNG
- Wetterstation Johnson
- Wetterstation OBH Nordica
- Wetterstation Optex
- Wetterstation Davis
- Wetterstation Levenhuk
- Wetterstation Vitek
- Wetterstation Prestigio
- Wetterstation EQ-3
- Wetterstation EVE
- Wetterstation Extech
- Wetterstation Daikin
- Wetterstation Fluke
- Wetterstation Oregon Scientific
- Wetterstation Homematic IP
- Wetterstation EQ3
- Wetterstation Elgato
- Wetterstation Digi-tech
- Wetterstation DMV Electronics
- Wetterstation Ea2 LABS
- Wetterstation EMOS SELECT
- Wetterstation Garni
- Wetterstation Hesdo
- Wetterstation Inovalley
- Wetterstation IT
- Wetterstation Kaindle
- Wetterstation La Crosse
- Wetterstation Meade
- Wetterstation Nasa
- Wetterstation Nor-tec
- Wetterstation Otio
- Wetterstation Paget Trading
- Wetterstation PCE Instruments
- Wetterstation Saphir
- Wetterstation Saxon
- Wetterstation Taylor
- Wetterstation Thierry Mugler
- Wetterstation UPM
- Wetterstation Uzoli
- Wetterstation Waldbeck
- Wetterstation Xeecom ApS
- Wetterstation TFA Dostmann
- Wetterstation Vimar
- Wetterstation PeakTech
- Wetterstation AcuRite
- Wetterstation Ease Electronicz
- Wetterstation Chauvin Arnoux
- Wetterstation YONO
- Wetterstation Brigmton
- Wetterstation Chacon
- Wetterstation Baldr
- Wetterstation Garin
- Wetterstation ChiliTec
- Wetterstation Global Water
- Wetterstation Greisinger
- Wetterstation Marathon
- Wetterstation Majestic
- Wetterstation Gewiss
- Wetterstation ClimeMET
- Wetterstation Buienradar
- Wetterstation Balance Meteo
- Wetterstation Rebel
- Wetterstation JDC
- Wetterstation Greenure
- Wetterstation Browin
- Wetterstation Setti+
- Wetterstation Bearware
Neueste Bedienungsanleitung für -Kategorien-
15 Oktober 2024
5 Oktober 2024
3 Oktober 2024
2 Oktober 2024
29 September 2024
24 September 2024
24 September 2024
22 September 2024
22 September 2024
21 September 2024