La Crosse Technology WS 6826 Bedienungsanleitung
La Crosse Technology
Wetterstation
WS 6826
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für La Crosse Technology WS 6826 (4 Seiten) in der Kategorie Wetterstation. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/4
1
The Wireless Color Forecast Station features manual set time, date,
weather forecast, indoor and outdoor temperature/humidity, with
temperature alerts, and heat index and dew point, on a stylish, colorful,
and easy to read display. Use the integrated USB charging port to
charge your smartphone, camera or other device when the forecast
station operates on A/C power. Wireless transmission range of over 300
feet (90 meters) in open air, from transmitter to forecast station.
WIRELESS COLOR FORECAST STATION
THIS STATION LEARNS
Please allow 3-4 days for barometer calibration to generate an
accurate forecast.
SETUP INSTRUCTIONS STEP BY STEP
STEP 1:
• Insert the 5-volt A/C power adapter into the designated area on the
back of the forecast station.
• Plug the A/C power adapter into a wall outlet for continuous backlight
(ON/OFF), and dimmer feature.
STEP 2: (optional battery operation)
• Remove battery cover from the forecast
station: Slide tab down and pull out to remove the cover.
• Insert 3 NEW AAA batteries (not included) into the back of the
forecast station. Observe the correct polarity (see marking inside the
battery compartment).
• The forecast station will light up and show, indoor temperature,
humidity and time.
• (Press and release the HI/LOW/OFF button to illuminate the backlight
for 8 seconds when using only battery power.)
• Do Not Mix Old and New Batteries
• Do Not Mix Alkaline, Standard, Lithium or Rechargeable
Batteries
STEP 3:
• Ensure that the transmitter is within 10 feet of the forecast station.
• Remove battery cover from transmitter: Slide the battery cover down
and lift off the front.
• Insert 2 NEW AA batteries (not included) into the
transmitter. Observe the correct polarity.
• Within 3 minutes, the forecast station will show
readings in the Outdoor temperature area on the LCD.
Note: Use Alkaline batteries (or Lithium for temperatures
below - 20°F /-28.8°C).
TRANSMITTER SIGNAL STRENGTH
z After the batteries are inserted, the forecast station will search for the
outdoor temperature/humidity transmitter for 3 minutes.
z The antenna symbol will flash during reception, and temperature
display will be dashes “---“.
z The antenna symbol will scroll during transmitter synchronization.
z If synchronization fails once, the antenna will lose one bar.
z If synchronization fails twice, the antenna will lose two bars.
z If reception continuously fails to receive 5 times, the antenna symbol
will be shown as .
z The antenna will show full display with successful RF
(radio frequency) reception.
TROUBLESHOOTING
z If the outdoor temperature is not displayed after three
minutes, hold the SENSOR SEARCH button on the
forecast station for three seconds to search for
outdoor transmitter.
z Next, remove the battery cover from the transmitter then press the TX
button to send a signal.
z If it still does not receive the outdoor temperature, remove the A/C
cord and batteries from both the forecast station and the transmitter
for 15 minutes repeat setup instructions from step 1.
TIME/DATE
The SETTINGS button moves through the program menu
and confirm settings.
Use the UP ARROW button to increase a value.
Use the DOWN ARROW button to decrease a value.
SET TIME/DATE
Hold the SETTINGS button for three seconds to enter time set mode.
z LANGUAGE : The language will flash. Use the ARROW buttons to
select the language for weekday display (French, Italian, Dutch,
Spanish, Danish, English or German) and press the SETTINGS
button to confirm and move to 12/24 hour.
z 12/24-HOUR: The time format will flash. Use the ARROW buttons to
choose 12-hour or 24-hour time format and press the SETTINGS
button to confirm and move to hour.
z HOUR: The Hour will flash. Use the ARROW buttons to choose the
hour, and press the SETTINGS button to confirm and move to
minutes.
z MINUTES: The Minutes will flash. Use the ARROW buttons to
choose the minutes, and press the SETTINGS button to confirm and
move to the year.
z YEAR: The Year will flash. Use the ARROW buttons to choose the
year, and press the SETTINGS button to confirm and move to the
month.
z MONTH: The Month will flash. Use the ARROW buttons to choose
the month, and press the SETTINGS button to confirm and move to
the date.
z DATE: The Date will flash. Use the ARROW buttons to choose the
date, and press the SETTINGS button to confirm and move to
Fahrenheit/Celsius.
z FAHRENHEIT/CELSIUS: °F or °C will flash. Use the ARROW buttons
to select Fahrenheit or Celsius. Press and release the SETTINGS
button to confirm and exit the program menu.
Note: When no buttons are pressed for ten seconds, the forecast station
will save the last change and default back to normal time and
temperature display mode.
ALARM TIME
The TIME ALARM button moves through the alarm
set mode and confirms settings.
Use the UP ARROW button to increase a value.
Wireless Color Forecast Station
WS6826 | Quick Setup Guide
2
Use the DOWN ARROW button to decrease a value.
SET ALARM TIME
From normal time and temperature display mode, press and release the
TIME ALARM button once to show alarm time. Hold the TIME ALARM
button for three seconds to enter alarm set mode.
z HOUR: The Hour will flash. Use the ARROW buttons to set the hour,
and press TIME ALARM button to confirm and switch to minutes.
z MINUTES: The Minutes will flash. Use the ARROW buttons to set the
minutes, and press TIME ALARM button to confirm.
z Press the SETTINGS button to return to normal mode
Note: When no buttons are pressed for ten seconds, the forecast station
will save the last change and default back to normal mode.
ACTIVATE/DEACTIVATE TIME ALARM
z In normal mode, press and release the TIME ALARM button once to
show alarm time.
z Press and release the TIME ALARM button repeatedly to turn
ON/OFF alarm. The alarm icon appears when alarm is activated.
Note: The alarm will ring for 2 minutes then turn off if no buttons are
pressed.
SNOOZE ALARM
When the alarm sounds, press the HI/LOW/OFF button to snooze the
alarm for 10 minutes. The snooze option can be repeated three times.
The alarm icon will flash while the snooze feature is
active.
Note: while the alarm sounds press any button except
the TIME ALARM button to turn the alarm off.
BACKLIGHT
Operating on A/C adapter, the backlight is on continuously when
operating the forecast station with the 5-volt A/C adapter.
Note: When the adapter is NOT in use, the Hi/Low/Off light feature is
not available.
• HIGH: The backlight is defaulted to HI at setup when the Adapter is in
use.
• LOW: Press and release the HI/LOW/OFF button to dim the backlight.
• OFF: Press and release the HI/LOW/OFF button again to turn the
backlight off. Press and release the HI/LOW/OFF button again to return
to full strength.
Note: When the backlight is off, press any button to activate the
backlight for 10 seconds.
Operating on battery power only, press and release the any button
and the backlight will show for 10 seconds.
TEMPERATURE TREND ICONS
The indoor and outdoor temperature trend indicators will update every
30 minutes or less. These trends represent temperature changes over
the past three hours.
Temperature rising more than 2°F /1°C in the past three
hours
Temperature has not changed more than 2°F/1°C
in the past three hours.
Temperature falling more than 2°F /1°C in the past three
hours
USB CHARGE PORT
The integrated USB charging port (on back) will charge your smart
phone, camera or other devices when the forecast station is plugged
into a power outlet with the included 5V A/C adapter.
Note: This is a power-output charging port. The charging port does not
supply power to the forecast station.
Begin charging your external device by connecting the device’s USB
charging cable (not included) to the USB
charging port on the back of the forecast station. Charging times will
vary.
Note: Some USB cables are for data transfer only and cannot be used
for charging. Make sure that the USB cable you use will charge your
device. Most USB cables included with mobile devices will work for
charging.
-USB Power Output: 1A maximum current
-Do NOT overload USB port. Charge 1A devices or less only
HEAT INDEX & DEW POINT TEMPERATURE
HEAT INDEX
Heat Index combines the effects of heat and humidity. It is the apparent
temperature of how hot it feels to a human being. As humidity increases,
the body is unable to cool effectively. The temperature will feel warmer.
View Heat Index: From normal time and temperature display mode,
press the HEAT/DEW button once and Heat Index will show instead of
the outdoor ambient temperature.
Note: Heat index will be the same number as the
temperature until the outdoor temperature is above 80
degrees °F (26.7°C).
DEW POINT TEMPERATURE
Dew Point Temperature is the saturation point of the air, or the
temperature to which the air has to cool in order to create condensation.
The higher the dew points, the higher the moisture content of the air at a
given temperature.
View Dew Point Temperature: From normal time and
temperature display mode, press the HEAT/DEW button
twice and Dew Point temperature will show instead of the
outdoor ambient temperature. The words Dew Point will
show near outdoor temperatures.
Note: Dew Point temperature is lower than the actual temperature.
TEMPERATURE ALERTS
Press and release the TEMP ALERT button to toggle between the
temperature alerts. Hold the TEMP ALERT button to set individual high
and low alerts.
The bell icon indicates each alert that is active.
The MAX TEMP button will turn a temperature alert ON.
This button will increase an alert value in Temp Alert set
mode.
The MIN TEMP button will turn a temperature alert OFF.
This button will decrease an alert value in Temp Alert set
mode.
One or all of the HI and LO temperature alerts may be set.
z Range for indoor temperature alert:
+32°F to +122°F (0°C to 50°C)
z Range for outdoor temperature alert:
-40°F to 140°F (-40°C to 60°C)
SELECT TEMPERATURE ALERT VALUE
Hold the TEMP ALERT button for five seconds, until the forecast station
beeps, to select and set temperature alert values.
z OUTDOOR HI alert will flash. Press the ARROW buttons to set the
alert value, and press the TEMP ALERT button to confirm. Then
press the TEMP ALERT button again switch to OUTDOOR LOW
setting.
z OUTDOOR LO alert will flash. Press the ARROW buttons to set the
alert value, and press the TEMP ALERT button to confirm. Then
press the TEMP ALERT button again switch to INDOOR HI setting.
z INDOOR HI alert will flash. Press the ARROW buttons to set the alert
value, and press the TEMP ALERT button to confirm. Then press the
TEMP ALERT button again switch to INDOOR LOW setting.
3
z INDOOR LO alert will flash. Press the ARROW buttons to choose the
value, and press the TEMP ALERT button to confirm and exit.
Note: After selecting temperature alert values use the next step to turn
individual alerts ON or OFF.
TEMPERATURE ALERTS ON/OFF
z In normal mode, hold then release the TEMP ALERT button to toggle
between:
o Outdoor HI
o Outdoor LO
o Indoor HI
o Indoor LO
z Press the MAX TEMP button to turn the selected
alert ON. The alert icon appears when alarm is
activated.
z Press the MIN TEMP button to turn the selected
alert OFF.
Note: When no temperature alerts are set, the
Temperature Alert area will show ALERTS OFF.
TEMPERATURE ALERT SOUNDS
z When temperature alert sounds, the corresponding alert icon will
flash.
z The alert beeps once every minute, until the temperature is out of
alert range.
z Press any button to stop alert. The alert symbol will still show.
z Turn alert OFF: In normal mode, hold and release the TEMP ALERT
button to select the alert to turn off. With HI or LO alert selected, press
the MIN button to turn that alert OFF.
MIN/MAX TEMPERATURES
The forecast station will show the daily minimum and maximum
temperatures each day starting at midnight (12:00 AM). The forecast
station automatically resets the min/max temperatures
at midnight (12:00 AM).
• View MIN data: Press and release the MIN TEMP
button to view the minimum Indoor and Outdoor
Temperatures.
• Reset MIN data: Hold the MIN TEMP button for 5 seconds and the
Indoor and all Outdoor Minimum Temperatures will be reset. The
temperature area will show dashes briefly then return to current
temperatures.
• View MAX data: Press and release the MAX TEMP
button to view the maximum Indoor and Outdoor
Temperatures.
• Reset MAX data: Hold the MAX TEMP button for 5
seconds and the Indoor and all Outdoor Maximum
Temperatures will be reset. The temperature area will show dashes
briefly then return to current temperatures.
LOW BATTERY
• When this low battery icon appears in the indoor (IN) reading
section, replace the batteries in the forecast station.
• When this low battery icon appears in the outdoor (OUT) readings
section, replace the batteries in the outdoor transmitter.
FORECAST TENDENCY INDICATOR
The forecast tendency indicators in the upper right corner of the forecast
display indicate the rising or falling pressure trend.
Rising Pressure Falling Pressure
The up trending arrow indicates the weather is improving. The down
trending arrow indicates the weather may worsen. When there is no
arrow the pressure is steady.
WEATHER FORECAST ICONS
The forecast station predicts weather condition of the next 12-hours
based on the change of atmospheric pressure with 70-75% accuracy.
Note: As weather conditions cannot be 100% correctly forecasted we
are not responsible for any loss caused by an incorrect forecast.
The forecast station samples the barometric pressure every twelve
minutes. These samples are averaged hourly and daily then stored in
nonvolatile memory. The three hour pressure icon change is based off of
the last four average hourly readings.
THIS STATION LEARNS
The forecast station calibrates barometric pressure based on its
location over a period of time to generate an accurate, personal
forecast. Please allow 3 to 4 days for barometer calibration.
IMPORTANT: As the forecast station builds memory, it will compare the
current average pressure to the past forty day average pressure for
increased accuracy. The longer the forecast station operates in one
location the more accurate the forecast icons will be.
CARE AND MAINTENANCE
• Do Not Mix Old and New Batteries
• Do Not Mix Alkaline, Standard, Lithium or Rechargeable
Batteries
• Do not expose the forecast station to extreme temperatures, vibration
or shock.
• Keep forecast station dry.
• Clean forecast station with a soft damp cloth. Do not use solvents or
scouring agents.
• The forecast station is not a toy. Keep it out of reach of children.
• The forecast station is not to be used for medical purpose or for public
information; it is for home use only.
• The specifications of this forecast station may change without prior
notice.
• Improper use or unauthorized opening of housing will void the
warranty.
POSITION THE FORECAST STATION
Choose a location for the forecast station that is within range
(300 feet, 90 meters) of the outdoor transmitter. The forecast
station has a built in base stand to sit on a table or desk.
• Choose a location 6 feet or more from electronics such as
cordless phones, gaming systems, televisions,
microwaves, routers, baby monitors, etc., which can
prevent signal reception.
• Be aware of electrical wires and plumbing within a wall.
• Best reception is achieved when the front or the back of the
forecast station is facing the outdoor transmitter. This allows a larger
portion of the antenna to receive a signal.
POSITION THE OUTDOOR TRANSMITTER
Once the forecast station shows the outdoor temperature/humidity,
place it and the transmitter in the desired locations and wait
approximately 1-hour before permanently mounting the transmitter to
ensure that there is proper reception. The transmitter should be
mounted vertically, in a shaded, protected area, at least 6 feet from the
ground to avoid damage and ensure accurate readings. The transmitter
Produktspezifikationen
| Marke: | La Crosse Technology |
| Kategorie: | Wetterstation |
| Modell: | WS 6826 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit La Crosse Technology WS 6826 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Wetterstation La Crosse Technology
8 Oktober 2024
30 September 2024
29 September 2024
23 September 2024
22 September 2024
13 September 2024
12 September 2024
12 September 2024
11 September 2024
11 September 2024
Bedienungsanleitung Wetterstation
- Wetterstation Clatronic
- Wetterstation Hama
- Wetterstation Lexibook
- Wetterstation Nedis
- Wetterstation Tchibo
- Wetterstation Clas Ohlson
- Wetterstation Cotech
- Wetterstation Profile
- Wetterstation Adler
- Wetterstation Camry
- Wetterstation Velleman
- Wetterstation ADE
- Wetterstation Alecto
- Wetterstation Auriol
- Wetterstation Beurer
- Wetterstation Bresser
- Wetterstation Cresta
- Wetterstation Day
- Wetterstation Denver
- Wetterstation Dexford
- Wetterstation Durabase
- Wetterstation ECG
- Wetterstation EMOS
- Wetterstation Eurochron
- Wetterstation Gira
- Wetterstation HomeMatic
- Wetterstation Irox
- Wetterstation Jacob Jensen
- Wetterstation Kemot
- Wetterstation König
- Wetterstation MarQuant
- Wetterstation Mebus
- Wetterstation Medisana
- Wetterstation Mesko
- Wetterstation National Geographic
- Wetterstation Prologue
- Wetterstation Renkforce
- Wetterstation Sempre
- Wetterstation Techno Line
- Wetterstation Technoline
- Wetterstation Telefunken
- Wetterstation TFA
- Wetterstation ThinkGizmos
- Wetterstation Thomson
- Wetterstation Trevi
- Wetterstation Ventus
- Wetterstation Weinberger
- Wetterstation Ytora
- Wetterstation Trotec
- Wetterstation Blaupunkt
- Wetterstation Braun
- Wetterstation Rocktrail
- Wetterstation Daewoo
- Wetterstation Pyle
- Wetterstation Muse
- Wetterstation Avidsen
- Wetterstation Elro
- Wetterstation GoGEN
- Wetterstation Hyundai
- Wetterstation Orion
- Wetterstation Livoo
- Wetterstation Perel
- Wetterstation Soehnle
- Wetterstation Balance
- Wetterstation Fysic
- Wetterstation Sencor
- Wetterstation Krontaler
- Wetterstation Honeywell
- Wetterstation MINOX
- Wetterstation Lowrance
- Wetterstation Globaltronics
- Wetterstation ELV
- Wetterstation Guardo
- Wetterstation Unitec
- Wetterstation Netatmo
- Wetterstation Ascot
- Wetterstation Theben
- Wetterstation Brandson
- Wetterstation Tanita
- Wetterstation JUNG
- Wetterstation Johnson
- Wetterstation OBH Nordica
- Wetterstation Optex
- Wetterstation Davis
- Wetterstation Levenhuk
- Wetterstation Vitek
- Wetterstation Prestigio
- Wetterstation EQ-3
- Wetterstation EVE
- Wetterstation Extech
- Wetterstation Daikin
- Wetterstation Fluke
- Wetterstation Oregon Scientific
- Wetterstation Homematic IP
- Wetterstation EQ3
- Wetterstation Elgato
- Wetterstation Digi-tech
- Wetterstation DMV Electronics
- Wetterstation Ea2 LABS
- Wetterstation EMOS SELECT
- Wetterstation Garni
- Wetterstation Hesdo
- Wetterstation Inovalley
- Wetterstation IT
- Wetterstation Kaindle
- Wetterstation La Crosse
- Wetterstation Meade
- Wetterstation Nasa
- Wetterstation Nor-tec
- Wetterstation Otio
- Wetterstation Paget Trading
- Wetterstation PCE Instruments
- Wetterstation Saphir
- Wetterstation Saxon
- Wetterstation Taylor
- Wetterstation Thierry Mugler
- Wetterstation UPM
- Wetterstation Uzoli
- Wetterstation Waldbeck
- Wetterstation Xeecom ApS
- Wetterstation TFA Dostmann
- Wetterstation Vimar
- Wetterstation PeakTech
- Wetterstation AcuRite
- Wetterstation Ease Electronicz
- Wetterstation Chauvin Arnoux
- Wetterstation YONO
- Wetterstation Brigmton
- Wetterstation Chacon
- Wetterstation Baldr
- Wetterstation Garin
- Wetterstation ChiliTec
- Wetterstation Global Water
- Wetterstation Greisinger
- Wetterstation Marathon
- Wetterstation Majestic
- Wetterstation Gewiss
- Wetterstation ClimeMET
- Wetterstation Buienradar
- Wetterstation Balance Meteo
- Wetterstation Rebel
- Wetterstation JDC
- Wetterstation Greenure
- Wetterstation Browin
- Wetterstation Setti+
- Wetterstation Bearware
Neueste Bedienungsanleitung für -Kategorien-
15 Oktober 2024
5 Oktober 2024
3 Oktober 2024
2 Oktober 2024
29 September 2024
24 September 2024
24 September 2024
22 September 2024
22 September 2024
21 September 2024