La Crosse Technology 331-09667V2 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für La Crosse Technology 331-09667V2 (2 Seiten) in der Kategorie Wetterstation. Dieser Bedienungsanleitung war für 24 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
Page 3 Page 4Page | 2
WIRELESS POOL THERMOMETER
INSTRUCTION MANUAL
Model: 331-1409/331-09667
DC:091021
For more product information visit: bit.ly/laxtech_support
P O W E R U P
1. Insert 2-AA batteries into the Pool Sensor’s Battery
Compartment. Securely reattach the twist-on Battery Cover,
ensuring the lines meet correctly to prevent water from entering.
2. Insert 2-AA batteries into the Pool Station.
3. Configure Basic Settings.
4. Once the sensor is reading to your pool station you can
place it in your pool.
S E T T I N G S
1. Hold the HI/LO button to enter the Settings Menu.
2. Press the + or - button to adjust values.
3. Press the HI/LO button to confirm, move to the next item or exit.
Settings Menu Order:
• 12/24 Hour Format
• Hour
• Minutes
• Fahrenheit/Celsius
Pool Station
331-1409/331-09667
HOUR MINUTES
FAHRENHEIT
CELSIUS
12 or
24 HOUR
Pool Sensor
LTV-POOL
AA
+-
AA
+-
Antenna
Battery
Compartment
(Slides Out)
Battery Cover Note: Battery Compartment slides out
partway to insert batteries.
B U T TO N F U N C T I O N S
V I E W I N D O O R TE M P E R AT U R E / H U M I D I T Y
• Press the button to toggle between Indoor Temperature and
Indoor Humidity readings, or activate Auto-Scroll.
• When the Auto-Scroll Icon appears in the bottom right corner,
the display will switch between these readings every 5 seconds.
A D D - O N T E M P E R AT U R E / H U M I D I T Y S E N S O R
To add an add-on sensor (sold separately) to this 331-1409 display:
1. Insert 2-AA batteries into the new TH sensor.
2. Hold the button to search for the sensor.
3. Press the TX button on the sensor to force a signal.
HI
LO
Pool Sensor showing Add-on Sensor showing
The Pool Icon shows when pool sensor is displayed.
The Sensor Icon shows when the add-on sensor is displayed.
Press to toggle between Pool and add-on TH sensor, or to activate
Auto-Scroll to cycle every five seconds. Hold to search for all sensors.
Press to view HI/LO records. All HI/LO record reset at midnight each day.
Hold to enter Settings Menu.
In Settings Menu, press to decrease
settings. Hold to decrease quickly.
When viewing HI/LO records, hold to reset record.
Press to toggle between Indoor Temperature and Indoor Humidity, or
activate Auto-Scroll to cycle every five seconds.
Page 6Page 5 Page 7 Page 8
LO W B AT T E R Y I N D I CATOR S
When a Low Battery Indicator appears by the time, replace the
batteries in the Pool Station
When a Low Battery Indicator appears by the Pool Sensor,
replace the batteries in the Pool Sensor.
CONNECT TO LA CROSSE VIEW APP
If you require additional support, get in touch with our friendly
customer support team based out of La Crosse, Wisconsin.
Phone: 1.844.200.8752
Online: bit.ly/contact_techsupport
Our knowledgeable customer support team is available:
Monday-Friday, 8am-6pm CST.
JOIN TH E CONVE R S ATION
Ask questions, watch detailed setup videos, and provide feedback
on our social media outlets!
W E R E H E R E TO H E L P
S PE C I F I C AT I ON S
Pool Sensor (LTV-POOL):
Temperature Range: 50°F to 122°F (Fahrenheit only)
Transmission Range: Over 330 ft. (100 meters) RF 915MHz (open air)
Transmission Interval: About every 60 seconds
(samples every 30 seconds)
Power: 2-AA, IEC, LR6 batteries (not included)
Battery Life: Over 24 months
Dimensions: 6.67‘L x 3.87’’ W x 4.18’H (16.95cm L x 9.84cm W x 10.61cm H)
Pool Station (331-1409):
Temperature Range: 32°F to 122°F (0ºC to 5C)
Humidity Range: 10% to 99% RH
Power: 2-AA, IEC, LR6 batteries (not included)
Battery Life: Over 12 months
Dimensions: 3.55” L x 1.19” W x 3.35” H (9.02cm L x 3.02cm W x 8.52cm H)
WA R R A N T Y I N F O
La Crosse Technology, Ltd. provides a (from date of purchase) on this product 1-year limited time warranty
relating to manufacturing defects in materials & workmanship.
La Crosse Technology, Ltd, 2830 S. 26th St., La Crosse, WI 54601
For Full Warranty Details, Visit: www.lacrossetechnology.com/support
F C C S TAT E ME N T
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also
complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with
provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any
other antenna or transmitter. End-users and installers must be provided with antenna installation instructions
and consider removing the no-collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
WARNING: This product can expose you to chemicals including styrene,
which is known to the State of California to cause cancer.
For more information go to: www.P65Warnings.ca.gov
All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed
using electronic, mechanical or chemical process without the written permission
of the publisher.
This booklet may contain errors or misprints. The information it contains is regularly checked and corrections
are included in subsequent editions. We disclaim any responsibility for any technical error or printing error, or
their consequences. All trademarks and patents are recognized.
C A R E + M A I N T E N A N C E
Do not mix old and new batteries.
Do not mix Alkaline, Lithium, standard, or rechargeable batteries.
Always purchase the correct size and grade of battery most suitable for intended
use.
Clean the battery contacts and also those of the device prior to battery
installation.
Ensure the batteries have with correct polarity (+ / -).
Remove batteries from equipment that will not to be used for an extended period.
Promptly remove expired batteries.
If you already own a La Crosse View connected display,
you can use your La Crosse View app to monitor your Pool
Sensor’s readings, as well as set temperature alerts right on
your phone.
1. Open your La Crosse View app and select ADD DEVICES
from the main menu.
2. Scan the Bar Code or type in the Device ID on the
side of the Battery Compartment.
3. Give the device a Name and Location, and press Save.
Within the next few minutes you should begin seeing your
Pool Sensor’s data within your app.
Note: The LTV-POOL sensor is fully functional without being
connected to the La Crosse View app.
HI/LO TEMPERATURE AND HUMIDTY READINGS
• Press the HI/LO button to view HI and LO records.
• The HI/LO Record from the pool sensor are constantly displayed.
• The records will reset automatically each day at midnight.
• To manually reset the HI/LO records press the HI/LO button to
view the records. Then hold the (-) MINUS button to reset each
record individually when viewed.


Produktspezifikationen

Marke: La Crosse Technology
Kategorie: Wetterstation
Modell: 331-09667V2

Brauchst du Hilfe?

Wenn Sie Hilfe mit La Crosse Technology 331-09667V2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Wetterstation La Crosse Technology

Bedienungsanleitung Wetterstation

Neueste Bedienungsanleitung für -Kategorien-