La Crosse Technology 308-1414MB Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für La Crosse Technology 308-1414MB (8 Seiten) in der Kategorie Wetterstation. Dieser Bedienungsanleitung war für 22 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
Model: 308 1414M- www.lacrossetechnology.com/support Page | 1
Model: 308 1414M-
Instruction Manual
DC: 103015
WIRELESS COLOR WEATHER STATION
FRONT
VIEW
TOP BUTTONS
Color Animated Forecast with Tendency
(All icons shown here)
SENSOR
TX141TH- Bv2
BACK
VIEW
Time, Calendar +
Alarm
Pullout
Stand
Sensor Battery
Compartment
2 “AA”
Indoor
Temperature
with Trend &
Temperature
Alerts
Battery
Compartment
3 “AAA
Battery
Cover
Remote Humidity
& Trends
Button Press
for Mold Risk
Indicator When
Using Remote
Sensor Indoors
AC Power Jack
GPU280500150WD00
Indoor Humidity
& Trend
Button Press for
Mold Risk
Indicator for
Weather Station
FRONT BUTTONS
Remote
Temperature
with Trend &
Temperature
Alerts
Wall Hanging Holes
Model: 308 1414M- www.lacrossetechnology.com/support Page | 2
GET STARTED
Step 1: Insert the included 5 volt AC power adapter into the -
weather station and then into wall outlet.
Step 2 (Optional): Insert 3 newAAA batteries (not included)
into the weather station. Observe the correct polarity.
Step 3: Insert 2 new “AA” batteries (not included) into
TX141TH- 2 Bv sensor. Observe the correct polarity.
The red LED will flash when transmitting.
Step 4: , After 5 minutes place the sensor in a shaded outdoor
location.
SET TIME, DATE AND TEMPERATURE UNITS
1. Hold the TIME SET button to enter time set mode.
2. P ress the or buttons to adjust the values. Hold for fast
adjustment.
3. Press the TIME SET button to confirm adjustments and
move to the next item.
Settings order:
1. WWVB ON/OFF
2. Time Zone
3. Daylight Saving Indicator ON/OFF
4. 12/24 Hour Time Format
5. Hour
6. Minutes
7. Year
8. Month
9. Date
10. F ahrenheit/Celsius
Press the TIME SET button to exit, or wait 20 seconds without
pressing buttons to return to the normal time display.
SET TEMPERATURE ALERTS
1. Hold the ALERTS button until the station beeps.
2. The temperature alert value will blink in set mode.
3. Press the or buttons to adjust the temperature
alert value.
4. Press the Next arm the ALERTS button to confirm. ,
temperature alerts (see below)
Model: 308 1414M- www.lacrossetechnology.com/support Page | 3
The temperature alert order:
1. 2. 3. 4. Remote High, Remote Low, Indoor High, Indoor Low
Press the ALERTS button to exit, or wait 20 seconds without
pressing buttons to return to normal time display
ARMS/DISARMS TEMPERATURE ALERTS
Press & release between the the ALERTS button toggleto
alerts Remote Remote HI / LOW / Indoor HI / Indoor LOW
Press the button to arm the alert.
Press the button to disarm the alert.
ALERT BELL ICON appears when armed.
ACTIVE TEMPERATURE ALERT
Beeps once per minute with flashing alert bell icon.
Press any button to stop the alert.
HEAT INDEX/DEW POINT/MOLD RISK
Press the HEAT/DEW button once to view remote
Heat Index.
Press the HEAT/DEW button twice to view remote
Dew Point.
Press the HEAT/DEW button a third time to view indoor
and remote Mold Risk.
VIEW/RESET MIN/MAX VALUES
The station automatically resets minimum and maximum values
daily at midnight (12:00 AM).
Press the button to view minimum values.
Hold the button to reset minimum values.
Press the button to view maximum values.
Hold the button to reset maximum values.
TEMPERATURE/HUMIDITY TREND INDICATORS
The temperature (2°F/1°C) and humidity (3% RH) trend
indicators update every 30 minutes or less.


Produktspezifikationen

Marke: La Crosse Technology
Kategorie: Wetterstation
Modell: 308-1414MB

Brauchst du Hilfe?

Wenn Sie Hilfe mit La Crosse Technology 308-1414MB benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Wetterstation La Crosse Technology

Bedienungsanleitung Wetterstation

Neueste Bedienungsanleitung für -Kategorien-