Korg Nu:Tekt ODS Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Korg Nu:Tekt ODS (31 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/31
- 1 -
E J 1
2019
OD-S
NUTUBE OVERDRIVE KIT
Table of Contents
Main features 2
.............................................................
Cautions Before Assembly.......................................5
Tools to prepare 5 ......................................................................
Checking the parts 5 .................................................................
Assembly Parts List 6
.................................................
Assembly 7
...................................................................
Adjusting and setting the main circuit board
...................
9
Operation Check 9
........................................................
Troubleshooting
......................................................................
9
Part Names and Functions 10
....................................
Specifications 10
..........................................................
Recommended Settings........................................... 11
Normal OVERDRIVE 11
..............................................................
Tube OVERDRIVE 11
...................................................................
Hard Drive 11
................................................................................
Mounting Diagram 13 ....................................................
List of mounted parts 14
.............................................
CIRCUIT DIAGRAM 16
.................................................
- 2 -
Thank you for purchasing the Nu:Tekt OD-S NUTUBE OVERDRIVE KIT.
To help you get the most out of your new instrument, please read this
manual carefully.
Main features
• The Nu:Tekt OD-S is a kit used to assemble effectors that use the Nutube.
• Use the Nutube on the OD-S to get an authentic tube overdrive sound.
• This kit includes a TUBE GAIN knob, which allows you to easily change
the distortion waveform.
• Use the internal dipswitch to switch between a full-range overdrive with a
full low end and a sparkling high end, and a midrange overdrive sound
with plenty of bite, on which the low and high end frequencies are cut off
at just the right amount.
• The operational amplifier uses an IC socket, and thus can be easily
replaced.
• A machined aluminum die-cast case is included.
• If you are concerned about whether you can assemble this kit or whether
you might make a mistake, refer to the video explanations available on
the Web (nutekt.org), or use our assembly service support (chargeable).
About Nutube
Nutube is a new vacuum tube developed by KORG INC. and Noritake Itron
Corporation and that utilizes technology from vacuum fluorescent displays.
As with conventional vacuum tubes, the Nutube is constructed with an
anode, grid and filament, and operates as a complete triode tube.
Furthermore, it generates the response and same rich harmonic character-
istics of conventional vacuum tubes.
If a strong impact is applied to this unit, noise at the high-frequency
range may be output. This is due to the structure of the Nutube; it is
not a malfunction.


Produktspezifikationen

Marke: Korg
Kategorie: Nicht kategorisiert
Modell: Nu:Tekt ODS

Brauchst du Hilfe?

Wenn Sie Hilfe mit Korg Nu:Tekt ODS benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Korg

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-