König KN-WS540N Bedienungsanleitung

König Wetterstation KN-WS540N

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für König KN-WS540N (101 Seiten) in der Kategorie Wetterstation. Dieser Bedienungsanleitung war für 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/101
KN-WS540N
MANUAL (p. 2)
ANLEITUNG (S. 6)
MODE D’EMPLOI (p. 10)
GEBRUIKSAANWIJZING (p. 14)
MANUALE (p. 18)
MANUAL DE USO (p. 22)
MANUAL (p. 26)
HASZNÁLATI ÚTMUTATÓ (o. 30)
KÄYTTÖOHJE (s. 34)
BRUKSANVISNING (s. 38)
NÁVOD K POUŽITÍ (s. 42)
MANUAL DE UTILIZARE (p. 46)
ΕΓΧΕΙΡΙΔΙΟ XPHΣHΣ (σελ. 50)
BRUGERVEJLEDNING (s. 54)
VEILEDNING (s. 58)
ИНСТРУКЦИЯ (62 стр.)
KILAVUZ (s. 66)
KASUTUSJUHEND (lk. 70)
NÁVOD (s. 74)
ROKASGRĀMATA (lpp. 78)
NAUDOJIMO VADOVAS (82 p.)
PRIRUČNIK (str. 86)
РЪКОВОДСТВО (p. 90)
INSTRUKCJA OBSŁUGI (str. 94)
PRIROČNIK (str. 98)
Weather Station
2
ENGLISH
Part I
This weather station has 7 dierent language options: English, German, French, Italian,
Spanish, Dutch and Danish.
The wather station has 6 dierent buttons: SET, ALARM, +, –/RCC, MAX/MIN and CH. These
buttons are sued for the following functions:
1. Set year, month, date, day and time
Press SET button and hold for 3 seconds, When the beep sounds, the YEAR digit ashes,
Use + or –/RCC button on the front to set the YEAR.
Press SET again twice, the MONTH digit ashes, use + or –/RCC to set the MONTH.
Press SET button again, the DATE digit ashes, use + or –/RCC to set to set the DATE.
Press SET button again twice, HOUR digit ashes, use + or –/RCC to set the HOUR.
Press SET button again, MINUTE digit ashes, use + or –/RCC to set the MINUTE.
Press SET again twice to resume normal display mode.
2. Set ALARM
There are two alarm times you can set: ALARM 1 and ALARM 2.
Press ALARM button in the front to display the rst alarm time and press again to display
the second alarm time.
To set the rst alarm time, press ALARM time once, rst alarm time displays, hold the
button for 3 seconds, alarm HOUR digit ashes, use + or –/RCC to set the alarm hour.
Press ALARM button again, alarm MINUTE digit ashes, use + or –/RCC to set the alarm
minute.
After setting the rst alarm time, use the same way to continue setting the second alarm
time if needed.
3. Activate/Deactivate the Alarm Function
In normal display mode press “+” button on the front to activate or deactivate the alarm
function. The alarm bell sign will appear or disappear accordingly.
4. Use SNOOZE
When the alarm activates, press SNOOZE to stop the alarm sound, the alarm will sound
again after 5 minutes.
5. CH Button
Press CH button to select between channel 1, 2, and 3 when receiving signals from the
transmitter. Please note that the selected channel must comply with the channel set for
the transmitter, e.g. if the transmitter is set to channel 1, then the station needs to be set
to channel 1 as well.
6. MAX/MIN Button
Press this button to display the maximum temperature and humidity of both indoors and
outdoors.
Press again to display the minimum temperature and humidity of both indoors and
outdoors.
3
ENGLISH
7. MOON PHASE
It will calculate the moon phase automatically, the moon phase being divided into
8degrees.
Temperature and Humidity:
1. Temperature range indoors: 0 °C~50 °C (32 °F~122 °F);
Temperature range outdoors: -50°C~70°C (-58°F~158°F).
2. Range of humidity: 20%–99%.
3. Tendency of temperature change: one check per hour, compared to previous data. If the
temperature changes more than 1 °C the arrow will be at.
Pressure and Weather Forecast:
1. Turn on power to set the height, or it will be 0.
2. Two kinds of pressure units: Hpa/Mb or in Hg.
3. Records the pressure data of the past 12 hours.
4. Compares the pressure data with the previous data every 60 minutes. If the change is
more than 2 hpa the pressure arrow will change.
5. Checks data every hour and will display the weather graphics according to the result.
RCC Reception Mode:
1. RCC reception format: DCF, the reception time is about 10 minutes.
2. RCC reception way.
3. It will begin to receive the RCC 3 minutes after turning on the unit.
4. RCC reception graphic:
The tower graphic ashes when receiving, the tower graphic will also ash when lost or
has no signal. The tower graphic will not ash when synchronizing the signal, but the arc-
shaped antenna symbol on top of the tower graphic is ashing. The whole RCC reception
graphic will display when the reception is successful: The tower graphic will turn o and
exit RCC when the signal reception fails.
Part II
There are 5 buttons at the rear: UP, DOWN, HISTROY, MAX/MIN, ALERT. These buttons are
used for the following functions:
1. ALERT Button
While in normal display mode, press this button to activate or deactivate the temperature
alert function. An arrow icon will appear to indicate the funcion has been activated, or
the arrow icon will disappear to indicate the alarm is deactivated.
While in normal display mode, press and hold this button for 3 seconds to enter the
temperature alert settings. The door temperature digits will start ashes. Press the ALERT
button at the rear to set the temperature (0 °C~50 °C) at which the statio nhas to sound
an alarm.
2. UP Button at the rear
In normal display mode press this button to select pressure unit between Hpa/Mb or Hg.
In normal display mode press and hold this button for 3 seconds to enter weather
forecast display mode, select by pressing the DOWN button (at the rear) among sunny,
cloudy, rainy, etc.


Produktspezifikationen

Marke: König
Kategorie: Wetterstation
Modell: KN-WS540N

Brauchst du Hilfe?

Wenn Sie Hilfe mit König KN-WS540N benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Wetterstation König

Bedienungsanleitung Wetterstation

Neueste Bedienungsanleitung für -Kategorien-