König KN-WS500UK Bedienungsanleitung

König Wetterstation KN-WS500UK

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für König KN-WS500UK (43 Seiten) in der Kategorie Wetterstation. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/43
1
KN-WS500
MANUAL (p. 2)
Weather Station
MODE D’EMPLOI (p. 8)
Station météo
MANUALE (p. 15)
Stazione Meteorologica
BRUKSANVISNING (s. 29)
Väderstation
MANUAL DE UTILIZARE (p. 35)
Staţie meteo
HASZNÁLATI ÚTMUTATÓ (o. 22.)
Időjárásjelző állomás
KÄYTTÖOHJE (s. 26)
Sääasema
GEBRUIKSAANWIJZING (p. 12)
Weerstation
ANLEITUNG (s. 5)
Wetterstation
MANUAL DE USO (p. 19)
Estación Meteorológica
NÁVOD K POUŽITÍ (s. 32)
Meteorologická stanice
ΕΓΧΕΙΡΙΔΙΟ XPHΣHΣ (σελ. 39)
Μετεωρολογικός Σταθμός
2
ENGLISH
Part I
This weather station has 7 different language options: English German, French, Italian, Spanish, Dutch
and Danish.
The weather station has 6 different buttons: CH ALERT MAX/MIN C/F 12/24 SNOOZE/LIGHT. These
buttons are used for the following functions:
1. The CH button is used to select channel 1, 2 or 3 while receiving the signal from the transmitter.
Please note that the selected channel must comply with the selected channel on the transmitter.
For example: if the transmitter is set to channel 1, the weather station needs to be set to channel 1
as well.
2. ALERT Button
* While in normal display mode, press this button to activate or deactivate the temperature alert
function. An arrow icon will appear to indicate the function has been activated, or the arrow icon will
disappear to indicate the alarm is deactivated.
* While in normal display mode, press and hold this button for 3 seconds to enter the temperature
alert settings. The indoor temperature digits will start ashing; press the DOWN button at the rear
to set the temperature (0° - 50°) at which the station has to sound an alarm.
3. MAX/MIN Button
* Press this button to display the maximum temperature and humidity of both indoors and outdoors.
* Press again to display the minimum temperature and humidity of both indoors and outdoors.
4. Set Alarm
* Press ALARM button at the back to display the alarm time.
* To set the alarm time, press ALARM time once, the alarm time displays, hold the button for
3 seconds, alarm HOUR digit ashes, use UP or DOWN to set the alarm hour.
* Press the ALARM button again, the alarm MINUTE digit ashes, use UP or DOWN to set the alarm
minutes.
5. Activate / Deactivate the Alarm Function
Under Alarm Mode , press “ALARM” button at the rear to activate or deactivate the alarm function.
Alarm bell sign will appear or disappear accordingly
6. C/F Button
Press the C/F button to switch the temperature display between C/F. Press and hold button for
3 seconds to force the unit to enter the RCC reception.
7. 12/24 Hr Button
Press 12/24-hour button to toggle between 12/24-hour formats.
8. Use Snooze
When alarm activates, press SNOOZE to stop the alarm sound, alarm will sound again after 5 minutes
9. MOON PHASE
It will calculate the moon phase automatically according to the calculator, the moon phase being
divided into 8 degrees.
3
Temperature and Humidity:
1. Temperature range indoors: 0ºC -50ºC (32ºF -122ºF) Temperature range outdoors: -50ºC -70ºC
(-58ºF-158ºF).
2. Range of humidity: 20%-99%.
3. Tendency of temperature change: one check per hour, compared to previous data. If the
temperature changes more than 1 ºC the arrow will be at.
RCC Reception Mode:
1. RCC reception format: DCF, the reception time is about 10 minutes.
2. RCC reception way.
3. It will begin to receive the RCC 3 minutes after turning on the unit.
4. RCC reception graphic:
The tower graphic ashes when receiving, the tower graphic will also ash when lost or no signal. The
tower graphic will not ash when synchronizing the signal, but the arc-shaped antenna symbol on top
of the tower graphic is ashing. The whole RCC reception graphic will display when the reception is
successful: The tower graphic will turn off and exit RCC when the signal reception fails.
Part II
There are 7 buttons at the rear: LIGHT CHANNEL RESET DOWN UP ALARM/SET TIME/SET. These
buttons are used for the following functions:
1. LIGHT button
* In normal display mode press this button, the LED will light up.
2. Press CH button to select between channel 1, 2, and 3 when receiving a signal from transmission.
Please note that the selected channel must comply with the channel set for transmission, e.g. if the
transmission is set to channel 1, then the station needs to be set to channel 1 as well.
3. UP Button (at the rear)
* The function for this button is the same as the 12/24 on the front; it can toggle between 12/24-hour
formats.
4. DOWN Button (at the rear)
* In normal display mode press this button to toggle between degrees Celsius or Fahrenheit.
5. Alarm/Set Button
* Press ALARM button at the rear to display the alarm time.
* To set the alarm time, press ALARM once, the alarm time displays. Press and hold the button for
3 seconds, the alarm HOUR digit ashes, use UP or DOWN to set the alarm hour.
* Press the ALARM button again, the alarm MINUTE digit ashes, use UP or DOWN to set the alarm
minutes. Then press ALARM again to nish the alarm setting.
* The alarm icon will display after nishing the alarm setting. Press ALARM/SET again to turn off the
alarm icon.
6. TIME/SET Button
* Press TIME/SET button and hold for 3 seconds when beep sounds, YEAR digit ashes. Use UP or
DOWN button at the rear to set the YEAR.
* Press TIME/SET again twice, the MONTH digit ashes, use UP or DOWN at the rear to set the
MONTH
* Press TIME/SET button again , the DATE digit ashes, use UP or DOWN at the rear to set the
DATE


Produktspezifikationen

Marke: König
Kategorie: Wetterstation
Modell: KN-WS500UK

Brauchst du Hilfe?

Wenn Sie Hilfe mit König KN-WS500UK benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Wetterstation König

Bedienungsanleitung Wetterstation

Neueste Bedienungsanleitung für -Kategorien-