Kicker CompVR Bedienungsanleitung

Kicker Autofreisprechanlage CompVR

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Kicker CompVR (24 Seiten) in der Kategorie Autofreisprechanlage. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/24

COMPVR SUBWOOFER

COMPVR8

COMPVR10

COMPVR12

COMPVR15

English Version

Versión Español

Altavoz Para Sonidos Graves

Deutsche Version

Tieftöner

Version Francaise

Haut-parleur d’Extrêmes Graves

LIVIN’ LOUD

2010 CompVR f01 indd 1

2010 CompVR f01 indd 12010 CompVR f01 indd 1

2010 CompVR f01.indd 1

9/9/2009 3:49:37 PM

9/9/2009 3:49:37 PM9/9/2009 3:49:37 PM9/9/2009 3:49:37 PM

2COMPVR SUBWOOFER 3

The Kicker CompVR subwoofers were specially designed for “Livin’ Loud” out in the harsh automotive

environment. CompVR subwoofers are extremely versatile and surpass the competition in a sealed or

vented box. They are made of advanced materials and construction techniques to maintain optimal

performance for years to come.

SPECIFICATIONS

WIRING

CompVR subwoofers are available with dual 2 (ohm) or dual 4 voice coils. Both coils must be  

connected to a source of ampliﬁ cation. The dual 2 woofer will generate a 1 load if the coils are wired  

in parallel or a 4 load in series. The dual 4 woofer will provide a 2 load wired in parallel or 8 load    

wired in series. The terminals with the white dots are for the ﬁ rst voice coil. The terminals with solid-red

and solid-black markings are for the second voice coil. See Figure 1.

SEALED ENCLOSURE APPLICATIONS

The CompVR generates more sound pressure than competing subwoofers on the market and excels

when used in the recommended sealed boxes. These sealed enclosure designs give the smoothest

response with increased energy at the lowest frequencies, 20 to 30Hz. These designs deliver massive

amounts of highly-accurate bass and can be driven with punishing levels of ampliﬁ er power.

The CompVR high performance suspension system can operate in a larger sealed enclosure. This

maximum enclosure volume application is ideal for SQ (ultra sound quality) installations. The SQ enclosure

generates a very ﬂ at response curve and superbly extends the subbass response.

CompVR woofers perform well in any size

sealed enclosure between the Compact

and SQ volume recommendations. These

systems will exhibit beneﬁ ts of both designs:

Compact produces high-impact bass,

and SQ generates low bass frequency

protraction. Overall, the system will sound

more like the recommended enclosure

design it is closest to in enclosure volume.

These enclosure recommendations have

been calculated with the airspace inside the

enclosure and include the displacement of

the woofer. All sealed-enclosure airspace

should be ﬁ lled to 50% loose poly-ﬁ l

(polyester ﬁ berﬁ ll) stufﬁ ng.

CompVR Subwoofer Owner’s Manual

Authorized KICKER Dealer:

Purchase Date:

Speaker Model Number:

Speaker Serial Number:

Model CompVR CompVR8 10 CompVR CompVR12 15

Nominal Impedance [Zn], ohm 2 or 4 2 or 4 2 or 4 2 or 4

Resonance Frequency [fs], Hz 52.7 43.8 32.6 24.6

Power Handling Watts, Peak (RMS) 400 (200) 800 (400) 800 (400) 1000 (500)

Sensitivity [SPLo], dB @ 1W, 1m 82.8 83.6 86.9 89.2

Effective Excursion [EXmax™], in (mm) .408 (10.37) .501 (12.73) .501 (12.73) .492 (12.5)

DC Resistance [Re], ohm 4.1 3.7 3.5 3.7

Mechanical Q-Factor [Qms] 9.577 10.03 8.166 9.138

Electrical Q-Factor [Qes] .937 .914 .703 .398

Total Q-Factor [Qts] .853 .838 .648 .381

Equivalent Volume [Vas], ft³ (L) .279 (7.925) .570 (16.159) 2.3 (65.294) 5 (143.82)

Net Displacement, in³ (cc) 33.9 (555.5) 60.4 (989.8) 75.9 (1243.8) 176.6 (2893.9)

Outer Frame Diameter, in (cm) 8-1/2 (21.6) 10-11/16 (27.1) 12-5/8 (32) 15-1/2 (39.3)

Hole Cut-Out Diameter, in (cm) 6-15/16 (17.6) 9-3/16 (23.3) 11 (27.8) 13-11/16 (34.7)

Mounting Depth, in (cm) 4-1/4 (10.8) 5-1/2 (14) 6-1/4 (15.9) 8-3/16 (20.7)

Model Volume ft3 (L) Panel A in. (cm) Panel B in. (cm) Panel C in. (cm)

CompVR8 .4 (11.3) 11X11 (27.9X27.9) 11X8.125 (27.9X20.6) 9.5X8.125 (24.1X20.6)

CompVR10 .8 (22.7) 13.5X13.5 (34.3X34.3) 13.5X10.125 (34.3X25.7) 12X10.125 (30.5X25.7)

CompVR12 1 (28.32) 14.5X14.5 (36.8X36.8) 14.5X11 (36.8X27.9) 13X11 (33X27.9)

CompVR15 1.8 (51) 17.25X17.25 (43.8X43.8) 17.25X13.5 (43.8X34.3) 15.75X13.5 (40X34.3)

Model Volume ft3 (L) Power Handling

CompVR8 .4 (11.3) 200W RMS

CompVR10 .8 (22.7) 400W RMS

CompVR12 1 (28.3) 400W RMS

CompVR15 1.8 (51) 500W RMS

Model Volume ft3 (L) Power Handling

CompVR8 1.8 (51) 140W RMS

CompVR10 3 (85) 300W RMS

CompVR12 4.6 (130) 300W RMS

CompVR15 5.2 (147) 500W RMS

CompVR CompVR CompVR CompVR8 / 10 / 12 / 15

Models:

Panel Dimensions for Compact Sealed Enclosures using 3/4” (1.9cm) thick MDF (See Figure 2)

Sealed Compact Sealed SQ

Note: All speciﬁ cations and performance ﬁ gures are subject to change. Please visit www.kicker.com for the most

current information. To get the best performance from your new KICKER Subwoofer, we recommend using genuine

KICKER Accessories and Wiring. Please allow two weeks of break-in time for the subwoofer to reach optimum

performance.

Figure 2

Figure 1 Series WiringParallel Wiring

Dual 2 Voice Coils = 4 Load 

Dual 4 Voice Coils = 8 Load 

Dual 2 Voice Coils = 1 Load 

Dual 4 Voice Coils = 2 Load 

Coil 1+Coil 1+

Coil 2+Coil 2+

Coil 2-Coil 2-

Coil 1-Coil 1-

2010 CompVR f01 indd 2 3

2010 CompVR f01 indd 2 32010 CompVR f01 indd 2 3

2010 CompVR f01.indd 2-3

9/9/2009 3:49:40 PM

9/9/2009 3:49:40 PM9/9/2009 3:49:40 PM9/9/2009 3:49:40 PM

4COMPVR SUBWOOFER 5

For more advice on box building, refer to your Authorized

Kicker Dealer, or click on the Support tab on the Kicker

homepage, www.kicker.com. Please e-mail support@

kicker.com or call Technical Support at (405) 624-8583

for speciﬁ c or unanswered questions.

CompVR Subwoofer - Covered by one or more of the following patents:

U.S. Pat #’s 6,611,604, 6,731,773 D473,216, D456,386, D449,293, D355,193,

Taiwan Pat. #162,154; Other U.S. and foreign patents pending.

VENTED ENCLOSURE APPLICATIONS

These boxes are the enclosure of choice for outrageous street bass and high performance SPL contests.

If space is not a problem and you want to get the most from your CompVR, try one of these ported

designs. You will not be disappointed. CompVR subwoofers will handle massive amounts of power in

any of the recommended enclosures, minimum or maximum. The smaller enclosures are best for use in

limited-space applications. The larger recommended enclosures will yield slightly more bass at the lowest

frequencies.

The ported Compact design increases bass efﬁ ciency and ﬁ ts in many space-limited applications.

Although it is the smallest recommended ported enclosure, the output from 30 to 80 Hz will be

considerably higher than that of any sealed box. The SPL / Deep Bass ported design has even more

output in this crucial frequency band. The SPL / Deep Bass is the largest and most efﬁ cient enclosure

design.

BOX BUILDING NOTES

Use 3/4” (1.9cm) or thicker MDF (medium density ﬁ berboard) and seal the joints with silicone. Use the

“template” inside your CompVR’s shipping carton to mark the mounting hole, then cut directly on the line.

These designs need internal bracing. Add triangular bracing between each of the larger unsupported

panels. See Figure 3.

All the cubic feet (L) measurements in this manual include the displacement of the woofer. For the vented

enclosures the displacement of the port must be calculated and added to the internal volume of the ﬁ nal

design. Use the outer dimensions of the port and multiply “X x Y x Z”, convert to cubic feet, for example

the CompVR12 vented Compact design’s external port dimensions are, using 3/4” (1.9cm) MDF: [ (12.5”

+ 1.5” total MDF wall thickness) x (2.5” + 1.5” total MDF wall thickness) x 20”] x (1 ft

3 / 1728 in3 ) = .65 ft3,

and add this number to the internal volume of the enclosure, CompVR12’s 1.75 ft

3 + .65 ft3 = 2.4 ft3. See

Figure 4. Due to the necessary length of these ports, you may want to fold the port along the bottom and

back walls. It will be impractical to use round ports for these designs.

Do not install a port opening against a solid surface, such as an internal brace, back-panel or trunk wall,

seat or interior panel of your vehicle. The port opening must remain unobstructed. Use the smallest

dimension of the rectangular port as the minimum amount of space between the port opening and any

solid surface to insure unrestricted airﬂ ow.

If you prefer an ultra-smooth bass response, you should loosely ﬁ ll your CompVR enclosure with poly-ﬁ l

stufﬁ ng. Ported designs will require covering the end of the port (located inside the box) with grill cloth,

chicken wire, or expanded metal to prevent the poly-ﬁ l from exiting the port. The use of poly-ﬁ l will slightly

decrease efﬁ ciency, but will deepen and extend the low frequency output.

Figure 3

Figure 4

D = 3” x 3” for CVR15, CVR12

D = 2” x 2” for CVR10, CVR8

stillwaterdesigns

P.O. Box 459 • Stillwater, Oklahoma 74076 • USA • (405) 624–8510 20090909-F-2010CompVR

Vented Compact CompVR CompVR8 10 CompVR CompVR12 15

Box Volume, ft³ (L) + port displacement .8 (22.7) 1.25 (35.4) 1.75 (49.6) 3 (85)

Port Opening Size, in x in (cm x cm) 1.5X8 (3.8X20.3) 2X10.5 (5.1X26.7) 2.5X12.5 (6.4X31.8) 2.75X15.5 (7X39.4)

Port Length, in (cm) 20.75 (52) 20 (50.8) 20 (50.8) 25.75 (65.4)

Power Handling, RMS 75 300 300 500

Vented SQ CompVR CompVR8 10 CompVR CompVR12 15

Box Volume, ft³ (L) + port displacement 1.2 (34) 1.75 (49.6) 2.25 (63.7) 5 (142)

Port Opening Size, in x in (cm x cm) 2X8 (5.1X20.3) 2.5X10.5 (6.4X26.7) 3X12.5 (7.6X31.8) 3X15.5 (7.6X39.4)

Port Length, in (cm) 19.125 (48.6) 20 (50.8) 20.5 (52.1) 22 (55.9)

Power Handling, RMS 75 300 300 500

Sound Check: Poor bass response?

Check the system phasing by reversing

the positive and negative speaker

connections on the subwoofer. If the

bass improves, then the subwoofer was

out of phase in reference to the rest of

the audio system.

2010 CompVR f01 indd 4 5

2010 CompVR f01 indd 4 52010 CompVR f01 indd 4 5

2010 CompVR f01.indd 4-5

9/9/2009 3:49:40 PM

9/9/2009 3:49:40 PM9/9/2009 3:49:40 PM9/9/2009 3:49:40 PM

Produktspezifikationen

Marke:	Kicker
Kategorie:	Autofreisprechanlage
Modell:	CompVR
Breite:	- mm
Tiefe:	- mm
Produkttyp:	Subwoofer-Treiber
Produktfarbe:	Schwarz
Höhe:	- mm
Schnittstelle:	Terminal
Subwoofer-Treiberdurchmesser (imperial):	12 "
Subwoofer Effektivwert Energie:	400 W
Subwoofer Frequenzbereich:	25 - 500 Hz
Subwoofer Empfindlichkeit:	86.9 dB
Gesamtleistung des Subwoofers:	800 W
Subwoofer-Treiberdurchmesser:	30 mm
Subwoofer Widerstand:	4 Ohm
Stimmenmagnetspuele Typ:	Dual