Kicker Comp 10C124 Bedienungsanleitung

Kicker Autofreisprechanlage Comp 10C124

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Kicker Comp 10C124 (4 Seiten) in der Kategorie Autofreisprechanlage. Dieser Bedienungsanleitung war für 34 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

COMP WOOFERSUB

CCCC15, 12, 10, 8

4 or 8

40.2

200 (100)

85.6

.34 (8.76)

3.98

10.00

.544

.516

.69 (19.54)

38 (620)

8 1/2 (21.6)

7 1/16 (18)

4 1/8 (10.4)

InfiniteBaffleMounting

The infinite baffle mounting method effectively utilizes the rear deck and trunk space of most sedan

type vehicles. The Comp subwoofer does not require a sealed enclosure for thump’in performance.

Carefully install the subwoofer in the baffle. Mark the rear deck or parcel shelf for the hole cut-out

diameter of the subwoofer and cut the hole. The rear deck may need to be reinforced to help hold the

weight of the subwoofer and to keep it from flexing during playback. Mount 3/4” (1.9 cm) thick MDF

(Medium Density Fiberboard) to the bottom of the deck. Mark the MDF and cut the holes. If MDF is not

available in your area, use high grade plywood. It is important to isolate the sound coming off the front

of the subwoofer from the sound radiating from the back of the subwoofer. This isolation is usually

accomplished by using the driver in a factory speaker location, or in a location with a semi-isolated rear

chamber. See Figure 1.

PERFORMANCE

Congratulations on your

KICKER purchase

Please record your purchase

information and keep your sales

receipt for validation of warranty.

Note: All specifications and performance figures are subject to change. Measurements based on 4 ohm voice coil models.

Please visit the www.kicker.com for the most current information.

INSTALLATION

COMP WOOFERSUB

Owner’sManual

C C C C15 /12 /10 /8

Models:

F uig re 1

COMP WOOFERSUB

R ear Seat

Tr n S a eu k / Storage p c R dear Soun

W va es

F o dr nt Soun

W va es

Authorized Kicker Dealer:

Purchase Date:

Subwoofer Model Number:

Subwoofer Serial Number:

_________________________

Comp oofSubw er

SealedEnclosureApplications

The Comp generates more sound pressure than competing subwoofers on the market and excels when

used in the recommended sealed boxes. These sealed enclosure designs give the smoothest response

with increased energy at the lowest frequencies, 20 to 30Hz. These designs deliver massive amounts of

highly-accurate bass and can be driven with punishing levels of amplifier power.

The Comp high performance suspension system can operate in a larger sealed enclosure. This

maximum enclosure volume application is ideal for SQ (ultra sound quality) installations. The SQ

enclosure generates a very flat response curve and superbly extends the subbass response.

Comp woofers perform well in any size sealed enclosure between the Compact and SQ volume

recommendations. These systems will exhibit benefits of both designs: Compact produces high-impact

bass, and SQ generates low bass frequency protraction. Overall, the system will sound more like the

recommended enclosure design it is closest to in enclosure volume. These enclosure recommendations

have been calculated with the airspace inside the enclosure and include the displacement of the woofer.

All sealed-enclosure airspace should be filled to 50% loose poly-fil (polyester fiberfill) stuffing.

Model:

C10

C12

C15

Sealed Maximum VolumeSQ (Enclosure )

1.2 ft3(34L) Power Handling = 100W RMS

2.4 ft3(68L) Power Handling = 150W RMS

3.5 ft3(99.1L) Power Handling = 150W RMS

5.0 ft3(141.6L) Power Handling = 250W RMS

Sealed Minimum VolumeCompact (Enclosure )

.5 ft3(14.2L) Power Handling = 100W RMS

1.0 ft3(28.3L) Power Handling = 150W RMS

1.25 ft3(35.4L) Power Handling = 250W RMS

2.25 ft3(63.7L) Power Handling = 250W RMS

Model:

C10

C12

C15

Panel B, in (cm)

11x9.5 (27.9x24.1)

13.5x12 (34.3x30.5)

14.5x13 (36.8x33)

17.25x15.75 (43.8x40)

Panel A, in (cm)

11x11 (27.9x27.9)

13.5x13.5 (34.3x34.3)

14.5x14.5 (36.8x36.8)

17.25x17.25 (43.8x43.8)

Volume, ft3(L)

.5 (14.2)

1.0 (28.3)

1.25 (35.4)

2.25 (63.7)

Panel C, in (cm)

9.5x9.5 (24.1x24.1)

12x12 (30.5x30.5)

13x13 (33x33)

15.75x15.75 (40x40)

P m o u hanel Di ensi ns forCompact Enclosures Sealed sing 3/4” (1.9cm) t ick MDF:

F u ig re 2

Model:

Nominal Impedance [Zn], ohm

Resonance Frequency [fs], Hz

Power Handling Watts, Peak (RMS)

Sensitivity [SPLo], dB @ 1W, 1m

Effective Excursion [EXmax™], in (mm)

DC Resistance [Re], ohm

Mechanical Q-Factor [Qms]

Electrical Q-Factor [Qes]

Total Q-Factor [Qts]

Equivalent Volume [Vas], ft

3(L)

Net Displacement, in

3(cc)

Outer Frame Diameter, in (cm)

Hole Cut-Out Diameter, in (cm)

Mounting Depth, in (cm)

C15

4 or 8

21.7

500 (250)

90.2

.45 (11.53)

3.32

11.20

.397

.383

9.61 (272.33)

199 (3257)

15 3/8 (39)

13 7/8 (35.2)

7 3/8 (18.8)

C12

4 or 8

26.5

300 (150)

89.1

.38 (9.76)

3.69

9.61

.447

.427

4.5 (127.65)

105 (1719)

12 1/2 (31.7)

11 1/8 (28.3)

5 13/16 (14.8)

C10

4 or 8

29.4

300 (150)

87.3

.38 (9.76)

3.70

9.65

.473

.451

2.27 (64.38)

60 (982)

10 11/16 (27.1)

9 1/4 (23.5)

4 13/16 (12.3)

Performance

The Kicker Comp subwoofers were specially designed for “Livin’ Loud” out in the harsh automotive

environment. Comp subwoofers are extremely versatile, excel in a sealed or vented box, and surpass

the competition on an infinite baffle (free-air) installation. They are made of advanced materials and

construction techniques to maintain optimal performance for years to come.

Please allow two weeks of break-in time for the subwoofer to reach optimum performance. To get the best performance

from your new Kicker subwoofers, we recommend using genuine Kicker Accessories and Wiring.

Comp Subwoofer - Covered by one or more of the following patents:

U.S. Pat #'s 6,611,604, 6,731,773 D473,216, D456,386, D449,293,

D355,193, Taiwan Pat. #162,154; Other U.S. and foreign patents pending.

Carefully mount loudspeakers in the trunk space or in other compartments

of the vehicle. Pay attention to cable lines, trunk springs, hinges and seat

mechanisms that could cause problems with the operation of the vehicle

or stereo system. Carefully lay the stereo system cables; pay attention to

seat fasteners and other items that could harm the cables.

4 5

COMP WOOFERSUB

INSTALLATION

Pro Tip: You are one ZX

Mono-Amplifier and a few

cables away from a slamm’in

system! The Kicker ZX line of

mono-amplifiers make it easy

to upgrade to rock-solid bass

with your existing or stock

source unit. Please ask your

dealer about the Kicker ZX

Amplifier upgrades.

Vented ApplicationsEnclosure

Ported Comps? Absolutely...and with a vengeance! These enclosures incorporate massive slot-loaded

(rectangular) ports with ultra low air velocity for ground pounding street bass that will make your “skin

bounce on your bones!”

These boxes are the enclosure of choice for outrageous street bass and high performance SPL

contests. If space is not a problem and you want to get the most from your Comp, try one of these

ported designs. You will not be disappointed.

The ported Compact design increases bass efficiency and fits in many space-limited applications.

Although it is the smallest recommended ported enclosure, the output from 30 to 80 Hz will be

considerably higher than that of any sealed box. The SPL / Deep Bass ported design has even more

output in this crucial frequency band.

The SPL / Deep Bass is the largest and most efficient enclosure design. The SPL / Deep Bass delivers

the sonic output needed to win SPL contests and it produces bass notes “all the way down to the

cella”. This design turns heads and jump starts your heart.

Model:

C10

C12

C15

Vented Deep Maximum VolumeSPL/Bass (Enclosure )

1.2 ft3(34L) + port displacement

1.5 x 8” (3.8x20.3cm) port, 12.25” (31.1cm) long

Power Handling = 55W RMS

1.75 ft 3(49.6L) + port displacement

1.5 x 10.5” (3.8x26.7cm) port, 13.25” (33.7cm) long

Power Handling = 150W RMS

2.25 ft 3(63.7L) + port displacement

2 x 12.5” (5.1x31.8cm) port, 16.375” (41.6cm) long

Power Handling = 150W RMS

4.0 ft3(113.3L) + port displacement

3 x 15.5” (7.6x39.4cm) port, 16.5” (41.9cm) long

Power Handling = 250W RMS

Vented Minimum VolumeCompact (Enclosure )

.66ft3(18.7L) + port displacement

1.5 x 8” (3.8x20.3cm) port, 18” (45.7cm) long

Power Handling = 55W RMS

1.25 ft3(35.4L) + port displacement

1.5 x 10.5” (3.8x26.7cm) port, 14.5” (36.8cm) long

Power Handling = 150W RMS

1.75 ft3(49.6L) + port displacement

2 x 12.5” (5.1x31.8cm) port, 16” (40.6cm) long

Power Handling = 150W RMS

3.0 ft3(85.0L) + port displacement

2.75 x 15.5” (7x39.4cm) port, 17” (43.2cm) long

Power Handling = 250W RMS

Box NotesBuilding

Use 3/4” (1.9cm) or thicker MDF (medium density fiberboard) and seal the joints with silicone. Use the

“template” inside your Comp’s shipping carton to mark the mounting hole, then cut directly on the line.

These designs need internal bracing. Add triangular bracing between each of the larger unsupported

panels. See Figure 3.

All the cubic feet (L) measurements in this manual include the displacement of the woofer. For the

vented enclosures the displacement of the port must be calculated and added to the internal volume of

the final design. Use the outer dimensions of the port and multiply “X x Y x Z”, convert to cubic feet, for

example the C12 vented compact design’s external port dimensions are, using 3/4” (1.9cm) MDF:

[ (12.5” + 1.5” total MDF wall thickness) x (2” + 1.5” total MDF wall thickness) x 16”] x (1 ft

3/ 1728 in3)

= .45 ft3, and add this number to the internal volume of the enclosure, C12’s 1.75 ft3+ .45 ft

3= 2.20

ft3

. See Figure 4. Due to the necessary length of these ports, you may want to fold the port along the

bottom and back walls. It will be impractical to use round ports for these designs.

Do not install a port opening against a solid surface, such as an internal brace, back-panel or trunk wall,

seat or interior panel of your vehicle. The port opening must remain unobstructed. Use the smallest

dimension of the rectangular port as the minimum amount of space between the port opening and any

solid surface to insure unrestricted airflow.

A Note on P CowerHandling apacity

Comp subwoofers will handle massive amounts of power in any of the recommended enclosures,

minimum or maximum. The smaller enclosures are best for use in limited-space applications.

The larger recommended enclosures will yield slightly more bass at the lowest frequencies.

The infinite baffle (free-air) mounting method will handle moderate amounts of power

and take up less trunk or passenger space.

If you prefer an ultra-smooth bass response, you should loosely fill your Comp enclosure with

poly-fil stuffing. Ported designs will require covering the end of the port (located inside the box) with grill

cloth, chicken wire, or expanded metal to prevent the poly-fil from exiting the port. The use of poly-fil

will slightly decrease efficiency, but will deepen and extend the low frequency output.

For more advice on box building, refer to your Authorized Kicker Dealer, or click on the tab onSupport

the Kicker homepage, www.kicker.com. Choose the Technical Manuals link and then download or view

the corresponding information. Please E-mail or call Technical Services support@kicker.com

(405) 624-8583 for specific or unanswered questions.

Note: The use of a subsonic filter will significantly increase the power handling.

The power handling specifications in these charts are calculated using a 25Hz, 24dB per octave subsonic filter.

F uig re 4

D r 2 = 3 x 3 fo C15, C1

D 2 2 r 0 = x fo C1 , C8

F uig re 3

INSTALLATION

The displac me ent of t eh port must be a e t t e l e t e cal late ancu d d dd d o h internal vo um of h final esign d .

Th , e dimensions for X Y, d d an Z may vary based on t e t i h h ckness of t eh material use to ma e t ek h port.

Produktspezifikationen

Marke:	Kicker
Kategorie:	Autofreisprechanlage
Modell:	Comp 10C124
Breite:	- mm
Tiefe:	- mm
Produkttyp:	Subwoofer-Treiber
Produktfarbe:	Schwarz
Höhe:	- mm
Einbauraum Tiefe:	148 mm
Schnittstelle:	Terminal
Subwoofer-Treiberdurchmesser (imperial):	12 Zoll
Subwoofer Effektivwert Energie:	150 W
Subwoofer Frequenzbereich:	27 - 500 Hz
Subwoofer Empfindlichkeit:	88.3 dB
Gesamtleistung des Subwoofers:	300 W
Subwoofer-Treiberdurchmesser:	300 mm
Subwoofer Widerstand:	4 Ohm