JVC GL-MS4015SZG Bedienungsanleitung

JVC Nicht kategorisiert GL-MS4015SZG

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für JVC GL-MS4015SZG (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
INSTRUCTION MANUAL
DLA-SH4KNL Projector Lens
GL-MS4015SZG Zoom Lens
GL-MS4016SZG
GL-MS4021SZG
GL-MS4011SG Short Focal Length Lens
Safety Precautions
Zoom Lens
GL-MS4015SZG/GL-MS4016SZG
GL-MS4021SZG
Short Focal Length Lens
Dimensional Outline Drawing
Thank you for purchasing this product.
Before using, please read through the “Instruction
Manual” to ensure proper use of this product.
In particular, read through the “Safety Precautions” to
ensure safe use of this product.
After you have read through the manual, please store it
carefully and use it as reference whenever necessary.
The manufacturing number is important for quality
control purposes. During purchase, check to ensure
that the manufacturing number is correctly indicated at
the side of the main unit.
Precautions Regarding this Manual
(1) Unauthorized reproduction of this manual without
permission is strictly prohibited.
(2) Specifications and appearance of this product may
be subject to change for improvement without prior
notice.
(3) Please note that some of the pictures and
illustrations may have been abridged, enlarged or
contextualized in order to aid comprehension.
Images may differ from the actual product.
Mass : 3.4 kg
Focus Motor
Focus Motor
182
5.5
113.5
1.2
4.34
Focus Motor
Zoom Motor
Focus Motor
Zoom Motor
182
5.5
113.5
98 98
1.5
2.38
Mass : 3.6 kg
Lens unit ................................................................................................................................... 1 set
Screw ................................................................................................................................... 5 pieces
Lens cap .............................................................................................................................. 2 pieces
Attached to the lens unit.
Instruction Manual .................................................................................................................. 1 copy
Warranty Card ........................................................................................................................ 1 copy
Maintenance Procedures
Remove dirt from the lens using commercial blowers or lens cleaning papers (for cleaning glasses
and cameras). Do not use fluid-type cleaning agents. This may lead to peeling of the surface coating
film. The lens surface is fragile. Avoid rubbing it hard or knocking it.
Accessories
- To install the lens, special expertise and skills are necessary. Be sure to ask our authorized dealer
(or a technician) to install the lens. Installation by personnel without the necessary expertise and
skills may result in injuries or electric shock.
- Do not look into the projection lens while the illumination lamp is turned on. Exposure of your
eyes to the strong light can result in impaired eyesight. Pay particular attention to keep out of
reach of children.
- Do not modify the lens. Modifying the lens may cause fire or electric shock.
- Connect the power cord only after all necessary equipment has been connected. Connecting the
equipment with the power cord plugged into the outlet may cause electric shock.
Focus Motor
Zoom Motor
Focus Motor
Zoom Motor
191
5.5
112
107 1.7
2.33
Mass : 3.6 kg
This product has been engineered and manufactured to assure your personal safety. But
IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order
not to defeat the safeguards incorporated into this product, observe the following basic rules for its
installation, use and service. Please read carefully before use.
Printed in Japan
© 2011 Victor Company of Japan, Limited 0211TTH-SW LCT2476-002B
GL-MS4011SG
Positioning Pin
Lens Cap
Lens Sheet
Front Cover
Top Panel
Positioning Pin
CN80Z0CN80F0
Motor
Lens Cap
Shift Lock
Screw
Shift Lock Screw
Mounting the Lens
When removing the lens cap, pull out without turning it.
Do not scratch or knock the lens surface.
Insert the lens with the motor facing upward.
Align the positioning pin of the projector (1 each on left
and right sides) with the positioning pin of the lens.
2 Remove the lens sheet attached to the lens
mount at the front cover
3 Remove the lens cap of the end to be inserted
into the projector
4 Insert lens into the mounting hole
5 Tighten the 5 screws using the hexagonal
wrench with a diagonal size of 3 mm (Bondhus
type recommended) to fasten the lens
7 Clamp the motor cable
When a zoom lens is used
When a short focal length lens is used
Connect the zoom motor cable (3 pin) to
“CN80Z0”, and the focus motor cable (2 pin) to
“CN80F0”.
Connect the focus motor cable (2 pin) to “CN80F0”.
6 Connect the motor cable
Retain these shift lock screws for future
use during transportation.
8 Unscrew the 2 shift lock screw
NOTE:
Remove the top panel if possible to ease the mounting
process. For details on how to remove the top panel, please
consult your authorized dealer or refer to the service
manual.
Remove the lens cap before projection.
9 Attach the front cover, and fasten using
the 6 screws using a Phillips screwdriver
CAUTION:
Before attaching the lens, check to make sure
that the power of the projector is not turned on and
the power cord is not connected. Failure to do so
may cause electric shock or injuries.
1 Unscrew the 6 screws using a Phillips
screwdriver to remove the front cover
54
1
2
6
7
Clamp
Zoom Motor Cable
Focus Motor
Cable
CAUTION:
Keep the cable away from the motor gear
when clamping the motor cable.


Produktspezifikationen

Marke: JVC
Kategorie: Nicht kategorisiert
Modell: GL-MS4015SZG

Brauchst du Hilfe?

Wenn Sie Hilfe mit JVC GL-MS4015SZG benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert JVC

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-