JBL Tune 500BT Bedienungsanleitung

JBL Kopfhörer Tune 500BT

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für JBL Tune 500BT (14 Seiten) in der Kategorie Kopfhörer. Dieser Bedienungsanleitung war für 74 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/14

8888.989.2534.1 (8/8/2017)

BRE610-BRE652

>75% recycled paper

>75% papier recyclé

English

General Description Fig. 1

1 Handle

2 Speed lights (I and II)

3 On/off button

4 Battery indicator

5 Release button

6 Socket for small plug

7 Epilating head

8 Integrated light

9 Massage cap

10 Facial cap

11 Delicate area cap

12 Skin stretcher cap

13 Shaving head

14 Foil

15 Trimmers

16 Comb for shaving head

17 Trimming head

18 Comb for trimming head

19 Callus removal attachment

20 Callus removal disk

21 Protection cap

22 Coupling unit

23 Body massage head

24 Body exfoliation brush

25 Protection cap for body exfoliation brush

26 Supply unit

27 Tweezers with light

28 Tweezers

Not shown: Pouch

Not shown: Exfoliation glove

Not shown: Cleaning brush

Note: The heads and accessories supplied vary for different type numbers.

Consult the overview illustration for the heads and accessories supplied

with your particular appliance, or consult the information on the box.

Charging

Note: Charge the appliance fully before you use it for the first time.

Note: This appliance can only be used without cord.

To charge the appliance, insert the small plug into the socket in the bottom

of the appliance and put the supply unit in the wall socket.

- The charge indicator flashes white (Fig. 2): the appliance is charging.

Charging takes up to 1.5 hours. 

- The charge indicator lights up white continuously (Fig. 3): the appliance is

fully charged and has a cordless operating time up to 40 minutes.

- The charge indicator does not light up when the appliance is switched

on: the appliance contains enough energy to be used.

- The battery indicator flashes orange (Fig. 2): the battery is almost empty

and needs to be charged. Charge the appliance when you have finished

using it.

Note: If the appliance is fully charged but still connected to the wall socket,

the battery indicator flashes a few times when you press the on/off button.

This indicates that you should disconnect the appliance from the wall

socket before you can switch it on.



Quick charge

- When the battery is completely empty and you start charging it, the

battery indicator flashes white quickly.

- After approximately 15 minutes, the battery indicator starts flashing white

slowly. At this point, the battery contains enough energy for up to 10

minutes of use.

Using the appliance

Attaching and detaching heads

1 To attach a head, press it onto the handle ('click') (Fig. 4).

2 To detach a head, press the release button on the back of the appliance

(Fig. 5).

Attaching and detaching accessories

1 To attach an accessory, simply snap it onto the head ('click') (Fig. 6).

2 To detach an accessory, grab its front and back and pull it upwards off

the head (Fig. 7). To detach a comb, pull its back upwards with a

fingernail (Fig. 8).

Switching the appliance on and off

1 To switch on the appliance, press the on/off button once. Speed 2 is

selected automatically and speed light II lights up (Fig. 9).

2 If you want to select speed 1, press the on/off button again. Speed light I

lights up (Fig. 10).

3 To switch off the appliance, press the on/off button once more.

The integrated light goes on automatically to give you a better view while

you use the epilating head (Fig. 11). If you want to switch off the integrated

light, keep the on/off button pressed for 3 seconds when you switch on the

appliance.

Epilating, shaving and trimming

The appliance is suitable for use in the bath or shower, but it can also be

used dry. If you want to use creams or body lotion, apply them after you

have used the appliance.

For gentle, less painful epilation, use the appliance on wet skin with or

without your regular shower gel.

Slight skin irritation like red skin or red dots may occur after epilation. This is

normal. We advise you to epilate before you go to bed at night, as any

redness or skin irritation usually disappears overnight.

Note: The appliance can only be used without cord.

1 When you epilate (with or without an accessory on the epilating head),

place the appliance on the skin at the angle shown in the illustration (Fig.

12).

2 When you use the appliance with other heads and accessories than the

epilating head, make sure you place the heads and accessories flat onto

the skin (Fig. 13).

3 When you use the appliance on sensitive areas, stretch the skin with

your free hand. When you use the appliance on your underarms, raise

your arm and put your hand on the back of your head to stretch the skin

(Fig. 14).

4 Move the appliance slowly against the direction of hair growth (Fig. 15).

Note: If you move the appliance over your skin too fast, you may not obtain

a smooth result.

Note: If your hairs are longer than 3-4mm, pretrim them for easier and more

comfortable epilation.

Epilating head

You can use the epilating head to epilate your legs, underarms and bikini

line.

Select speed 2 for most efficient epilation. Select speed 1 for areas with little

hair growth and for hard-to-reach areas such as knees and ankles.

Massage cap

You can attach the massage cap onto the epilating head to massage the

skin and minimize the pulling sensation of epilation during use.

Skin stretcher cap

You can attach the skin stretcher cap onto the epilating head. It keeps the

skin tight during epilation to reduce pain.

Delicate area cap

You can attach the delicate area cap onto the epilating head for more

comfortable epilation of delicate areas (e.g. the underarms and bikini line).

24 25

192021

2728

BRE652/10

BRE652/00

BRE651/00

BRE650/10

BRE650/00

BRE644/10

BRE644/00

BRE640/10

BRE640/00

BRE632/00

BRE631/00

BRE630/10

BRE630/00

BRE619/00

BRE652/10

BRE652/00

BRE651/00

BRE650/10

BRE651/00

BRE631/00

BRE652/10

BRE652/00

BRE651/00

BRE650/10

BRE650/00

BRE644/10

BRE644/00

BRE640/10

BRE640/00

BRE634/10

BRE632/00

BRE630/10

BRE630/00

BRE620/10

BRE620/00

BRE619/00

BRE610/00

BRE652/10

BRE652/00

BRE651/00

BRE650/10

BRE650/00

BRE644/10

BRE644/00

BRE640/10

BRE640/00

BRE634/10

BRE632/00

BRE631/00

BRE630/10

BRE630/00

BRE619/00

BRE611/00

BRE652/10

BRE652/00

BRE644/10

BRE644/00

BRE640/10

BRE640/00

BRE632/00

BRE631/00

BRE611/00

BRE651/00

BRE650/00

BRE650/10

BRE640/10

BRE640/00

BRE634/10

BRE631/00

BRE630/10

BRE630/00

BRE620/10

BRE620/00

BRE652/10 BRE652/00

BRE652/10

BRE652/00

BRE651/00

BRE650/10

BRE650/00

BRE644/10

BRE644/00

BRE640/10

BRE640/00

BRE634/10

BRE619/00

BRE650/00

BRE644/10

BRE644/00

BRE652/10

BRE652/00

BRE651/00

BRE650/10

BRE644/10

BRE644/00

BRE650/10

BRE650/00

BRE652/10

BRE652/00

BRE651/00

BRE650/10

BRE650/00

Facial cap

You can attach the facial cap onto the epilating head for precise epilation of

facial hair (e.g. above your upper lip).

Do not use the appliance to epilate eyelashes, eyebrows or scalp hair.

Shaving head

You can use the shaving head to shave your legs and body.

Note: The appliance can be moved in two directions, for easier shaving of

underarms.

Note: Always check the foil before use. If it is damaged in any way, replace

the cutting unit right away (see 'Replacement').

Comb for shaving head

You can attach the comb onto the shaving head to trim hairs to a length of

3mm.

Trimming head

You can use the trimming head to trim hard-to-reach areas in the bikini

zone.

Place the trimming head flat onto the skin to trim (Fig. 16). Place the

trimming head perpendicularly onto the skin for styling and shaping (Fig. 17).

Comb for trimming head

You can attach the comb onto the trimming head to trim hairs in the bikini

area to a length of 3mm (Fig. 18).

Body massage head

The body massage head rotates firmly to relax your muscles.

Note: You have to put the body massage head on the coupling unit before

you can attach it onto the handle (Fig. 19).

Body exfoliation brush

You can use the body exfoliation brush to remove dead skin cells.

Do not use the body exfoliation brush on your face.

Note: You have to put the body exfoliation brush on the coupling unit

before you can attach it onto the handle (Fig. 20).

Callus removal head

Note: This appliance is only intended to be used on the feet.

You can use the callus removal disk in 3 different ways, depending on the

area or callus you want to treat.

1 To treat a large, flat area, Use the entire disk (Fig. 21). Make sure you

place the disk flat onto the skin for good control during use.

2 For precision treatment of smaller areas and good visibility of the treated

area (Fig. 22), use the top part of the disk that sticks out beyond the top

of the head (Fig. 23).

3 For precision treatment and for buffing away hard skin very quickly, use

the narrow edge of the protruding top part of the disk (Fig. 24).

Move the disk back and forth gently over the skin you want to treat. Do not

push too hard. When you push too hard, the disk might stop rotating.

Cleaning and storage

Keep the supply unit dry.

1 To clean the epilating head, use the cleaning brush to brush away any

hairs, hold the appliance upside down, switch it on and rinse it with cold

water for 15 seconds after every use (Fig. 25).

2 To clean the shaving head: use the cleaning brush to brush away any

hairs that have collected under the trimmers. Grab the two trimmers of

the cutting unit and pull the cutting unit out of the shaving head (Fig. 26).

Clean all parts of the shaving head with the cleaning brush, except the

foil.

Note: Lubricate trimmer teeth and foils with a drop of sewing machine oil

every six weeks for optimal performance.

3 Rinse the cutting unit, heads and accessories under the tap. Shake them

firmly to remove water drops.

4 To clean the callus removal head and disk (if supplied): clean the outside

of the head and disk with the cleaning brush supplied (Fig. 27). Then

remove the disk off the head and clean the inside of the head with the

cleaning brush supplied (Fig. 28). If you prefer, you can rinse the callus

removal head and disk under a running tap.

5 Let all parts dry completely.

6 Place the cutting unit back into the shaving head ('click').

7 Put protection caps or combs on the heads to prevent damage to the

heads when you store them.

8 Store the appliance, its heads and accessories in the pouch.

Replacement

To buy accessories or spare parts, visit or gowww.shop.philips.com/service

to your Philips dealer. You can also contact the Philips Consumer Care

Center in your country (see the international warranty leaflet for contact

details).

Body exfoliation brush (if supplied): If you use the body exfoliation brush

2-3 times a week, it lasts approximately 3 months. Replace the body

exfoliation brush every 3 months with one of the original type (BRE394).

Callus removal head (if supplied): Replace the callus removal disk with one

of the original type (BCR372) when its effectiveness decreases. We advise

you to replace the disk at least once every year.

Shaving head (if supplied): For optimal performance, we advise you to

replace the cutting unit of the shaving head every two years. If you use the

shaving head twice or more times a week, replace the cutting unit more

often. Always replace the cutting unit with one of the original type (BRL384).

Troubleshooting

This chapter summarizes the most common problems you could encounter

with the appliance. If you are unable to solve the problem with the

information below, visit for a list of frequentlywww.philips.com/support

asked questions or contact the Consumer Care Center in your country.

Problem Solution

The appliance

does not work as

well as it should.

Make sure you hold the appliance at the correct

angle (Fig. 12) and move it across the skin slowly,

against the direction of hair growth.

Clean the heads and accessories after every use.

After charging, the

battery indicator

flashes when I

press the on/off

button, but the

appliance does not

switch on.

The appliance is still connected to the wall socket. In

this case, the battery indicator flashes to indicate

that you should disconnect the appliance from the

wall socket before you can switch it on.

During use, the

appliance becomes

hot and suddenly

stops operating.

Then both speed

lights flash for 4

seconds.

The overheat protection has been activated. The

overheat protection switches off the appliance

automatically if it becomes too hot. To reset the

overheat protection, let the appliance cool down and

then switch it on again. To avoid overheating of the

appliance, do not press it too hard onto your skin.

My skin is irritated

after I have used

the appliance.

When you use the epilating head or the shaving

head, slight skin irritation like red skin or red dots

may occur. This is normal. To avoid irritated skin,

make sure that you gently move the appliance

against the direction of hair growth. Do not apply too

much pressure. If the irritation lasts longer than 3

days, we advise you to consult a doctor.

When you use the epilating head or the shaving

head, always stretch the skin with your free hand.

When you use the appliance on your underarms,

raise your arm and put your hand on the back of

your head to stretch the skin (Fig. 14).

Epilation causes

ingrown hairs.

You can use the body exfoliation brush 24 hours

before or 48 hours after epilating, to help prevent

ingrown hairs.

Note: Do not exfoliate immediately after epilation, as

this may intensify possible skin irritation caused by

epilation.



Čeština

Všeobecný popis (obr. 1)

1 Rukojeť

2 Kontrolky rychlosti (I a II)

3 Vypínač

4 Indikátor baterie

5 Uvolňovací tlačítko

6 Zásuvka pro malou zástrčku

7 Epilační hlava

8 Integrovaná svítilna

9 Masážní nástavec

10 Nástavec na obličej

11 Nástavec pro citlivé oblasti

12 Krytka napínače pokožky

13 Holicí hlava

14 Fólie

15 Zastřihovače

16 Hřeben pro holicí hlavu

17 Zastřihovací hlava

18 Hřeben pro zastřihovací hlavu

19 Nástavec k odstraňování ztvrdlé kůže

20 Kotouč k odstraňování ztvrdlé kůže

21 Ochranný kryt

22 Spojovací jednotka

23 Hlava pro masáž těla

24 Kartáč pro peeling těla

25 Ochranný kryt kartáče pro peeling těla

26 Napájecí jednotka

27 Pinzeta se světlem

28 Pinzeta

Není na obrázku: Pouzdro

Není na obrázku: Exfoliační rukavice

Není na obrázku: Čisticí kartáč

Produktspezifikationen

Marke:	JBL
Kategorie:	Kopfhörer
Modell:	Tune 500BT
USB Anschluss:	Nein
Bluetooth:	Ja
Bluetooth-Version:	4.1
Bluetooth-Profile:	A2DP, AVRCP, HFP, HSP
Akku-/Batteriekapazität:	300 mAh
Gewicht:	155 g
Produkttyp:	Kopfhörer
Empfohlene Nutzung:	Anrufe/Musik
Headset-Typ:	Binaural
Tragestil:	Kopfband
Produktfarbe:	Pink
3,5-mm-Anschluss:	Nein
Übertragungstechnik:	Kabellos
Position Kopfhörerlautsprecher:	Ohrumschließend
Kopfhörerfrequenz:	20 - 20000 Hz
Akku-/Batterietyp:	Integrierte Batterie
Akkuladezeit:	2 h
Akku-/Batterietechnologie:	Lithium Polymer (LiPo)
Mikrofon-Typ:	In-line
Faltbar:	Ja
2,5-mm-Anschluss:	Nein
Treibereinheit:	32 mm
Akku-/Batteriespannung:	3.7 V
Frequenzband:	2.48 GHz
Akku:	Ja
Kontinuierliche Audiowiedergabezeit:	16 h
6,35-mm-Stecker:	Nein
RF-Konnektivität:	Nein
Mikrofon-Geräuschunterdrückung:	Ja