IFi Audio nano iGalvanic 3.0 Bedienungsanleitung

IFi Audio Nicht kategorisiert nano iGalvanic 3.0

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für IFi Audio nano iGalvanic 3.0 (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 24 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
Ver.1.1
1. USB3.0 'Type B' input port
For USB cable input from the computer audio source.
2. USB3.0 'Type A' output port
For USB cable to connect from iGalvanic3.0 to the DAC.
3. Ground Link®
As the iGalvanic3.0 is a dedicated high-performance audio
product, it is designed to work in different computer audio
systems:
No Earth (sub-optimal)
One Earth (optimal)
Multiple Earths (sub-optimal)
The Ground Link switch is to optimise isolation in systems
where:
• Full Isolation
(default – centre position). Start from this setting.
• DC to RF soft ground-link
(to avoid hum in systems without earth – up position)
• RF soft ground-link
(to avoid audio drop-outs in systems without RF earth –
down position)
Tip: Earth/ground loops are commonly found and this switch
deals with NO or Multiple Earths/Grounds. If you have
determined that your system has no Earth, it is recommended
that an Earth/Ground is added such as by using the
. Please see your nearest iFi retailer for more
details.
Tip: It is more preferable to use a USB 3.0 port over using a
USB 2.0 port on the PC. Make the connection between Audio
Device (DAC) and iGalvanic3.0 first before connecting the
iGalvanic3.0 to the Host PC. While this sequence is NOT
mandatory, it ensures correct detection.
Tip: When adding the iGalvanic3.0 to the USB chain under
Windows, it may be necessary to re-install a fresh version of
the USB Audio Driver.
Tip: The iGalvanic3.0 is powered by the Host PC via the USB
bus and has an ultra-clean 0.5uV stealth converter. There is no
benefit powering the iGalvanic3.0 with other power supplies.
7. LEDs
IN PU T
1
ifi-audio.com
iGalvanic3.0
ISO
DC -R F
RF
GR OU ND
LINK
OU TP UT
G
G
G
GGal
al
al
alalv
v
v
vva
a
a
aan
n
n
nni
i
i
iic
c
c
c c
I
I
I
IIso
so
so
sosol
l
l
lla
a
a
aa


o
o
o
oon
n
n
nn
3 2
Computer conected
USB3.0/2.0 conected
Specications:
Output Voltage:
Output Current:
Output Noise oor:
USB Standards:
Connector host-side:
Connector device-side:
Input Voltage:
Power consumption:
Electrical Safety Standard:
Isolation Device max Voltage:
Dimensions:
Weight:
Warranty period:
Specifications are subject to change without notice.
5V ± 3% @ 500mA load
900mA max.
0.5uV(0.0000005V) @ 500mA
load
USB 3.0 Super-speed 5.0Gbps
USB 2.0 Hi-speed 480Mbps
USB 2.0 Full-speed 12Mbps
USB 2.0 Low-speed 1.5Mbps
USB 3.0 B-Type
USB 3.0 A-Type
DC 4.5V to 5.5V USB Bus
Power
< 6W (includes powered USB
device)
BS 7671:2008 ELV
3000 Vrms Isolation Voltage
per UL 1577
93 (l) x 67 (w) x 28 (h) mm
128g (0.28lbs)
12months
Terms and Conditions
iFi guarantees that this iFi product shall be free from defects in materials and
workmanship for a period of 1 year for parts and labour.
The warranty period begins at the date of retail sale by an authorized iFi
distributor/dealer and is subject to the following requirements and
understandings:
• It is the responsibility of the buyer within 30 days from the original sale, to
register and activate the product warranty with the iFi w ebsite.
• The original invoice must be produced for authentication prior to any
warranty claim.
• The iFi product must not have been modified in any manner whatsoever,
or the warranty will immediately become void.
• The iFi warranty is only valid in the country of original sale and is not
transferable.
• The product must not have been stored in a humid environment; nor
subjected to weather, water, or saltwater spray.
• iFi shall not, under any circumstances, be liable for any incidental or
consequential damages arising from the loss of property or other damage
or losses due to the failure of an iFi product. iFi is not liable for loss of use or
inconvenience caused by the failure of an iFi product. iFi is not liable for
damage caused to other audio components because of the failure of an iFi
product.
• During the warranty period, iFi will repair the product to working order, or,
at iFi's discretion, replace the defective module with a similar available
product.
• All repairs per formed after expiry of the warranty period will be charged to
the owner and will carry a 180-day warranty on parts and labour. The
customer is responsible for shipping the unit to the iFi distributor in the
original packaging. This includes the payment of any shipping charges and
related taxes.
• Should any warranty issues arise, iFi’s decision is full and final.


Produktspezifikationen

Marke: IFi Audio
Kategorie: Nicht kategorisiert
Modell: nano iGalvanic 3.0

Brauchst du Hilfe?

Wenn Sie Hilfe mit IFi Audio nano iGalvanic 3.0 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert IFi Audio

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-