HP Aruba Unified AP-345 Bedienungsanleitung

HP Zugangspunkt Aruba Unified AP-345

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für HP Aruba Unified AP-345 (17 Seiten) in der Kategorie Zugangspunkt. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/17
Aruba 340 Series Campus Access Point
Installation Guide
Installation Guide | January 2018 1
Aruba 340 Series Campus Access Point 340 Series (AP-344 and AP-345) are high-performance dual-radio wireless devices.
These access points (AP) provide secure wireless connectivity for 2.4GHz 802.11 b/g/n and 5GHz 802.11a/n/ac Wi-Fi
networks. The optional dual-5GHz radio mode allows both radios to operate in the 5GHz radio mode simultaneously,
doubling the 5GHz capacity of the access point. The 340 Series can be deployed in either a controller-based (ArubaOS) or
controllerless (InstantOS) network environment. Two wired Ethernet ports located on the back of this access point are
available to connect the access point to the wired infrastructure and to deliver power the device.
This access point can be attached to a standard flat 9/16" or 15/16” suspended ceiling rail using the mount adapters
provided. Other mounting options are supported by additional mount kits (sold separately).
Aruba 340 Series Campus Access Point 340 Series provide the following capabilities:
Wireless access
Wireless mesh
Air Monitor (AM)*
Spectrum Monitor (SM)*
Support for selected USB peripherals
Integrated Bluetooth Low Energy (BLE) radio
* Air Monitor and Spectrum Monitor features are not supported while this device operates in dual-5GHz mode.
Package Contents
The following materials are included with this product:
Aruba 340 Series Campus Access Point
9/16" and 15/16” ceiling rail mount adapters
Hardware Overview
The following sections describe the hardware components of the 340 Series access point.
Figure 1 Aruba AP-345 (front view)
Inform your supplier if there are any incorrect, missing, or damaged parts. If possible, retain the carton, including the
original packing materials. Use these materials to repack and return the unit to the supplier if needed.
2Aruba 340 Series Campus Access Point | Installation Guide
LED
The LED displays located on the front panel of the access point indicate the following functions:
System Status
The System Status LED indicates the operating condition of the access point, See Table 1.
1 Blinking: one second on/one second off
2 Flashing: mostly on, shortly off every two seconds
Radio Status
The Radio Status LED indicates the operating mode of the access point’s radios. See Table 2.
3 Alternating: light cycles alternate between green/amber; one second on/one second off.
Table 1 System Status LED
Color/State Meaning
Off Device is powered off
Green - blinking 1Device is booting; not ready
Green - solid Device is ready; fully functional, no network restrictions
Green - flashing 2Device is ready; either uplink is operating at sub-optimal speed (<1Gbps)
Amber - solid Device is ready; operating in Power Save mode due to one of the following conditions:
powered by an 802.3af POE source
Intelligent Power Monitoring (IPM) restrictions applied
No network restrictions
Amber - flashing Device is ready; operating in Power Save mode due to one of the following conditions:
powered by an 802.3af POE source
Intelligent Power Monitoring (IPM) restrictions applied
Either uplink is negotiating at suboptimal speed (<1Gbps)
Red - solid Error condition - immediate action required
Table 2 Radio Status LED
Color/State Meaning
Off Meets one of the following conditions:
device is powered off
both radios are disabled
Green - solid Both radios operating in access mode
Green - blinking One radio operating in access mode; one radio disabled
Amber - solid Both radios operating in monitor mode
Amber - blinking One radio operating in monitor mode; one radio disabled
Alternating3One radio operating in access mode; one radio in monitor mode
Blue - Solid Both radios operating in dual 5GHz mode
Aruba 340 Series Campus Access Point | Installation Guide 3
LED Display Settings
The LEDs have three operating modes that can be selected in the system
management software:
Default mode: Refer to Table 1 and Table 2
Off mode: LEDs are off
Blink mode: LEDs blink green
To cycle through the modes, press the push button located on the back-right corner of the device using a small, narrow
object, such as a paperclip.
Antenna Connectors
The AP-344 access point supports up to 8 external antennas, which can be attached to the RP-SMA connectors located on
the front of the access point. See Figure 3.
The primary antenna ports, labeled A0-A3, correspond with the radio chains 0, 1, 2, and 3. This set of antennas can be
used in dual-radio mode (dual band, diplexed), for either upper or lower 5GHz channels in dual-5GHz mode.
The secondary antenna ports, labeled B0-B3, correspond with radio chains 0, 1, 2, and 3. This set if antennas can be used
for either upper or lower 5GHz channels in dual-5GHz mode, but are unable to operate in dual-radio mode. These
connectors are located beneath a removable plate on the front cover of the device.
Figure 2 Opening the antenna cover of the AP-344
To remove the cover, insert a flathead screwdriver into the slotted rubber bushing located on the top edge of the access
point, then use the screwdriver to pry off the cover. See Figure 2.
To determine which external antennas are compatible with this device, refer to the product data sheet at
www.arubanetworks.com.
!
!
!
!!
Holding the button for 10 seconds or longer will cause the device to return the access point to its original factory
settings.

Produktspezifikationen

Marke: HP
Kategorie: Zugangspunkt
Modell: Aruba Unified AP-345

Brauchst du Hilfe?

Wenn Sie Hilfe mit HP Aruba Unified AP-345 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Zugangspunkt HP

HP

HP Aruba Instant On AP22 Bedienungsanleitung

30 Juni 2024
HP

HP M330 Bedienungsanleitung

28 Juni 2024
HP

HP ProCurve MSM410 Bedienungsanleitung

28 Juni 2024
HP

HP Aruba AirMesh MST200 Bedienungsanleitung

28 Mai 2024
HP

HP Aruba Unified AP-515 Bedienungsanleitung

8 September 2023
HP

HP Aruba AP-565 Bedienungsanleitung

8 September 2023
HP

HP 417 Bedienungsanleitung

8 September 2023
HP

HP Aruba Unified AP-505 Bedienungsanleitung

8 September 2023
HP

HP Aruba Unified AP-345 Bedienungsanleitung

12 Oktober 2022

Bedienungsanleitung Zugangspunkt

Neueste Bedienungsanleitung für -Kategorien-

DrayTek

DrayTek VigorAP 920R Bedienungsanleitung

13 Oktober 2024
Cisco

Cisco Aironet 3700P Bedienungsanleitung

11 Oktober 2024
Cisco

Cisco Aironet 1815m Bedienungsanleitung

8 Oktober 2024
TP-Link

TP-Link Festa F65-Wall Bedienungsanleitung

4 Oktober 2024
Cisco

Cisco AIR-CAP702I-I-K9 Bedienungsanleitung

4 Oktober 2024
EnGenius

EnGenius ENH200 Bedienungsanleitung

1 Oktober 2024
Mikrotik

Mikrotik OmniTIK 5 PoE ac Bedienungsanleitung

1 Oktober 2024
Dell

Dell PowerConnect W-IAP3WNP Bedienungsanleitung

29 September 2024
Mikrotik

Mikrotik Cube Lite60 Bedienungsanleitung

28 September 2024
D-Link

D-Link DWL-1000AP+ Bedienungsanleitung

24 September 2024