Hooker 5751-90253-95 Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Hooker 5751-90253-95 (3 Seiten) in der Kategorie Bett. Dieser Bedienungsanleitung war für 20 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/3
1/3
ASSEMBLY INSTRUCTION
ITEM# 1-90251- 5/0 Panel Headboard 575 95
575 90251- 2-95 5/0 Panel Footboard
575 902671- - 6/0 & 6/6 Panel Headboard 95
575 902681- - 6/0 & 6/6 Panel Footboard 95
575 902531- - 5/0 & 6/6 Rails 95
575 902631- - 6/0 Rails 95
Caution: Please make sure you have all parts indicated below prior to assembly.
This bed is heavy and can best be assembled with the help of two or more people.
Diagram 5
Diagram 2
Diagram 3
Diagram 1
2/3
Please note the hardware bag to assemble side rails to HB&FB is in the box of side rails.
Assembly steps:
1. Insert 2 bolts (H) into holes of each side post on Headboard (A) and Footboard (B), attach the
ends of side rails (C) to bolts (H) on posts by using 2 curved washers (G) and 2 nuts (E), tighten
nuts (E) securely with spanner wrench (F). (See diagram 1)
Diagram 1
2. Take out center supports (L) from the rail box, attach center supports (L) to slats (D) by using 2
bolts (Q), 2 lock washers (V) and 2 flat washers (U). Secure bolts (Q) by using allen wrench (R).
(See diagram 2)
Diagram 2
3. Attach slats (D) to side rails (C) and tighten screws(K) on both ends of slats(D) to side rails(C), .
(See 3)diagram
Diagram 3
3/3
Note: You can change the height of slats by adjusting the height of cleats on side rail as shown in
diagram 4. Remove bo s (I), lock washers (O) and flat washers (J) from the cleats by turning lt
the bolts (I) with allen wrench (M) in anti-clockwise direction. Adjust the cleats to a desired
position, and then secure lock washers, flat washers, bolts in clockwise direction by turning
with allen wrench.
Diagram 4
You can adjust the height of center supports (L) as shown in diagram 5 to meet your need by the
following steps.
1. Unscrew bolts on center supports (L) with allen wrench (R).
2. Adjust the height of center supports, align holes on 2pcs of woods and tighten them together with
2 bolts (Q), 2 lock washers (V) and 2 flat washer (U) by turning with wrench (R) in clockwise
direction.
Diagram 5
Cleaning Instruction: Clean finished parts with a mild dishwashing liquid and water solution on a damp
cloth. Polish the finish with soft cloth and an industry recognized furniture polish.
Produktspezifikationen
| Marke: | Hooker |
| Kategorie: | Bett |
| Modell: | 5751-90253-95 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Hooker 5751-90253-95 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Bett Hooker
29 August 2024
29 August 2024
29 August 2024
29 August 2024
29 August 2024
29 August 2024
29 August 2024
29 August 2024
29 August 2024
29 August 2024
Bedienungsanleitung Bett
- Bett SilverCrest
- Bett Tchibo
- Bett IKEA
- Bett Güde
- Bett Leen Bakker
- Bett Livarno
- Bett MADE
- Bett Mio
- Bett Stompa
- Bett Tvilum
- Bett Habitat
- Bett Invacare
- Bett Jane
- Bett JYSK
- Bett Maxi-Cosi
- Bett Florabest
- Bett Beter Bed
- Bett Bopita
- Bett Dormiente
- Bett Flexa
- Bett Flintshire
- Bett KidKraft
- Bett Lifetime
- Bett Loof
- Bett Nolte
- Bett Parisot
- Bett Rauch
- Bett Talgø
- Bett Vipack
- Bett Wehkamp
- Bett BabyGO
- Bett Lionelo
- Bett Delta
- Bett Nuna
- Bett Trasman
- Bett Intex
- Bett Kogan
- Bett Paidi
- Bett Meubelco
- Bett UPPAbaby
- Bett Jensen
- Bett Boori
- Bett Gami
- Bett Fantastic
- Bett X Rocker
- Bett Calligaris .com
- Bett Burmeier
- Bett Carlson
- Bett Dorel
- Bett Bell'O
- Bett Koala
- Bett Ovela
- Bett Shangri-La
Neueste Bedienungsanleitung für -Kategorien-
4 Oktober 2024
4 Oktober 2024
4 Oktober 2024
4 Oktober 2024
3 Oktober 2024
3 Oktober 2024
3 Oktober 2024
3 Oktober 2024
3 Oktober 2024
3 Oktober 2024