Hikvision AE-DC2018-D1 Bedienungsanleitung

Hikvision Dashcam AE-DC2018-D1

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Hikvision AE-DC2018-D1 (2 Seiten) in der Kategorie Dashcam. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
D Mobile Phone ConnecǺon F CauǺons
2. Loudspeaker
Safety InstrucǺon
These instrucǺons are intended to ensure that users can use the product
correctly to avoid danger or property loss.
CauǺons: Injury or equipment damage may occur if any oĔhe cauǺons are
neglected. Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
In the use oĔ he dashcam, you must be in strict compliance with the local
laws and regulaǺons.
You are recommended to install the dashcam on the locaǺon of rear
mirror to ensure the dashcam can record with the best surveillance view.
DO NOT install the dashcam on the locaǺon that will block the driver’s sight.
Keep the user manual properly for future reference. See iniǺal
connecǺon of dashcam in user manual.
Purchase the TF card from legal channel. To ensure safe and
stable data storage, s recommended to use TF card of
Class 10 or above.
FormaÍ he new TF card first before using the card.
To protect TF card from damage, shut down the dashcam before
installing and uninstalling TF card.
he dashcam is directly connected with the vehicle power
system, you are recommended to power off the dashcam when
the engine is off. Disconnect cigareÍ e lighter to avoid insufficient
voltage and abnormal startup. Reconnect cigareÍ e lighter to
ensure dashcam work normally when you starÍ he car again.
• Operating temperature is from -20 C to 70 C (-4 F to 158 F). To
protecÍ he dashcam, DO NOT use iǺn high temperature, low
temperature, or high-humidity environment. Keep the dashcam
from rain and dust.
The manual is subjecÍ o update. The funcǺons of dashcam may
vary according to different models.
The installation height is not greater than 2 m.
Clean the windshield and paste
the electrostaǺc film onto it.
Avoid introducing air bubble.
DO NOT paste the film repeatedly.
Model
Aperture
Pixel
Max. ResoluǺon
Angle
Storage
G-Sensor
Wi-Fi
Sound Saving
Power Supply
Power ConsumpǺon
OperaǺng Temperature and Humidity
InstallaǺon Type
Dimensions (L × W × H)
Weight
AE-DC2018-D1
F2.0
200 W
1080P @ 30fps
Horizontal: 102°, Diagonal: 56°
TF card, 16 GB to 128 GB
Built-in, collision triggered recording and recording lock
Yes
Yes
5 VDC, 1.5 A
Approx. 3.5 W
less.or95%Humidity158 F).to(-4 F°C70to°C-20
General
77 × 32 × 35 mm (3.03ʺ × 1.26ʺ × 1.38ʺ)
Approx. 100 g (0.22 lb.)
SpecificaǺons
HikDashcam · D1
User Manual
A Packing List
1. Dashcam × 1
2. Car Charger × 1
3. Power Cord × 1
4. ElectrostaǺc Film × 1
5. User Manual × 1
B Parts IntroducǺon
1. Lens 3. TF Card Slot
4. USB Interface 5. 3M Tape 6. Microphone
7. Power BuÍ on 8. Reset BuÍ on
Hold the power buÍ on to restore the device to factory seÖ ngs.
Press the power buÍ on to switch between AR mode and Wi-Fi
mode.
C InstallaǺon
Suggested PosiǺon:
The center ofimage as close as
possible to the center line oĔhe front
AdjusÍ he angle to the
target direcǺon.
Plug car charger into the cigareÍ e
lighter, and plug the power cord
into the USB interface.
Scan QR Code
Scan the QR code to download and
install HikDashcam app.
1
Add the dashcam to the app.
a. Run the HikDashcam app.
b. Tap Wi-Fi ConnecǺon.
c. In Wi-Fi list, selecÍ he Wi-Fi SSID
he target dashcam and enter
Wi-Fi password to build
connecǺon.
You can seÍ he parameters he
dashcam.
For iOS, you need to go to Wi-Fi
settings of your phone to connect
to the Wi-Fi of dashcam.
If Wi-Fi cannot be searched, please
2
Dashcam Wi-Fi default parameters:
Wi-Fi SSID: HIKVISION-D1-XXXX
(XXXX refers to the lasŐour
characters of verificaǺon code.)
Wi-Fi password: 1234567890
(To edit password, please go to the
SeÖ ngs page.)
press power buÍ on to switch to
Wi-Fi mode.
E Basic DescripǺon
Start Up & Shutdown
ConnecÍ he power cord to the car baÍ ery.
Device starts recording automaǺcally once the car starts.
Device powers off when the car stalls.
Recording
Recordings are divided to ordinary video and emergency video.
You can seÍ he video voice on/off via System SeÖ ngs or
Hikdashcam APP.
Paste the device onto the
electrostaǺc film and route
cable to the disater box for
power supply. The device
interfaces should be
installed to the righŐor
easier power cord
connecǺon.
SoluǺonTrouble
The mobile phone
cannot display
recordings.
It may be relevant with the player or system oĔhe
phone. Please connect TF card to your computer and
display the recordings.
Wi-Fi connecǺon
takes a long Ǻme.
It may be caused by the interferrence oĔhe
surrounding Wi-Fi signals. Please use the dashcam in
an environment ofless interferrence.
Shut down unnecessary programs in your phone to
release some resources for HikDashcam app and
reconnect Wi-Fi.
H Legal Statement H Legal Statement
©2022 Hangzhou HikAuto Technology Co., Ltd. All rights reserved.
AbouĒ his Manual
The Manual includes instrucǺons for using and managing the Product.
Pictures, charts, images and all other informaǺon hereinaĔer are for
descripǺon and explanaǺon only. The informaǺon contained in the
Manual is subjecÍ o change, without noǺce, due to firmware updates
or other reasons.
Trademarks
and other Hikvision's trademarks and logos
are the properǺes of Hikvision in various jurisdicǺons.
Other trademarks and logos menǺoned are the properǺes of
their respecǺve owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS
MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE,
SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL
FAULTS AND ERRORS”. HIKAUTO MAKES NO WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY,
SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE
USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT
WILL HIKAUTO BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL,
INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS,
DAMAGES FOR LOSS OF BUSINESS
PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION
OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON
BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT
LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE
PRODUCT, EVEN IF HIKAUTO HAS BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR
INHERENT SECURITY RISKS, AND HIKAUTO SHALL NOT TAKE ANY
RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR
OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK,
VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER,
HIKAUTO WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL
APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING
THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY,
YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT
DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING
WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL
PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY
RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED
END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF
WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR
PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY
ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR
UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS
ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE
APPLICABLE LAW, THE LATER PREVAILS.
FCC InformaǺon
Please take attenǺon that changes or modificaǺon not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuanÍ o part 15 he
FCC Rules. These limits are designed to provide reasonable protecǺon
against harmful interference when the equipmenǺs operated in a
residenǺal environment. This equipment generates, uses and can
radiate radio frequency energy and, if noǺnstalled and used in
accordance with the instrucǺons, may cause harmful interference to
radio communicaǺons. However, there is no guarantee that
interference will not occur in a parǺcular installaǺon. IĔhis equipment
does cause harmful interference to radio or television recepǺon, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correcÍ he interference by one or more oĔhe
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separaǺon between the equipment and receiver.
—ConnecÍ he equipmenǺnto an outlet on a circuit dif ferenŐrom that
to which the receiver is connected.
—ConsulÍ he dealer or an experienced radio/TV technician for help
FCC CondiǺons
This device complies with part 15 he FCC Rules. OperaǺon is subject
to the following two condiǺons:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operaǺon.
EU Conformity Statement
This product and - if applicable - the supplied
accessories too are marked with "CE" and comply
therefore with the applicable harmonized
European standards listed under the RE DirecǺve
2014/53/EU, the EMC DirecǺve 2014/30/EU, the LVD DirecǺve
2014/35/EU, the RoHS DirecǺve 2011/65/EU.
2012/19/EU (WEEE direcǺve): Products marked
with this symbol cannot be disposed of as unsorted
municipal waste in the European Union. For proper
recycling, return this producÍ o your local supplier upon
the purchase of equivalent new equipment, or dispose ofit at
designated collecǺon points. For more informaǺon see:
www.recyclethis.info.
2006/66/EC (battery direcǺve): This product
contains a battery that cannot be disposed of as
unsorted municipal waste in the European Union.
See the product documentaǺon for specific battery
informaǺon. The battery is marked with this symbol, which may include
lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For
proper recycling, return the battery to your supplier or to a designated
collecǺon point. For more informaǺon see: www.recyclethis.info.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards
requirements.
This device complies with Industry Canada licence-exempt RSS
standard(s). OperaǺon is subjecÍ o the following two condiǺons:
(1) this device may not cause interference, and
I Regulatory InformaǺon I Regulatory InformaǺon
The equipment should be installed and operated with a minimum
distance 20 cm between the radiator and your body.
G TroubleshooǺng
Trouble SoluǺon
The dashcam drops
easily.
StarǺng the dashcam
failed.
The dashcam powers
off easily.
Recording is
abnormal and
indicator is unlit.
Recording is blurred.
Wi-Fi cannot be
searched.
Dashcam reboots
itself.
Clean the windshield beforeinstallaǺon.
Check whether the vehicle is started and power
supply is normal.
Check whether the car charger is Ǻghtly connected.
Press "RESET" to reboot device.
Restore to defaults: hold the RESET button unǺl the
startup music is heard.
Make sure the power cord is in good condiǺon.
Make sure the power cord is Ǻghtly connected to the
according interfaces.
Make sure thaÍ he dashcam started up successfully.
Check whether the TF card is inserted.
Check the status of TF card, e.g. its format, its lifespan.
Change TF card ifiǺs not well.
Make sure the protecǺve film is peeled off.
Check whether the windshield or the lens of dashcam
is blurred.
Check whether the device is in Wi-Fi mode. Wi-Fi
connecǺon is available for Android phones. Connect
Wi-Fi through System->Wi-Fi (different entries for
different phone models).
Check whether the car charger is Ǻghtly connected.
Check whether the 3M tape is tightly sticked to the
electrostatic film before the installation.
Mobile phone cannot
connecÍ o dashcam.
Make sure HikDashcam app is installed.
Please restarÍ he dashcam to the app.
G TroubleshooǺng
13 14
I Regulatory InformaǺon
(2) this device must accept any interference, including
interference that may cause undesired operaǺon oĔhe device.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radioexempts de licence. L'exploitaǺon
est autorisée aux deux condiǺons suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'uǺlisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est suscepǺble d'en
compromettre le foncǺonnement.
Under Industry Canada regulaǺons, this radio transmitter may
only operate using an antenna of a type and maximum (or lesser)
gain approved for the transmitter by Industry Canada. To reduce
potenǺal radio interference to other users, the antenna type and
its gain should be so chosen thaÍ he equivalenǺsotropically
radiated power (e.i.r.p.) is not more than that necessary for
successful communicaǺon.
Conformément à la réglementaǺon d'Industrie Canada, le présent
émetteur radio peut
foncǺonner avec une antenne d'un type et d'un gain maximal (ou
inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le
but de réduire les risques de brouillage radioélectrique à
l'intenǺon des autres uǺlisateurs, il faut choisir le type d'antenne
et son gain de sorte que la puissance isotrope rayonnée
équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à
l'établissement d'une communicaǺon saǺsfaisante.
This equipment should be installed and operated with a minimum
distance 20cm between the radiator and your body.
Cet équipement doit être installé et uǺlisé à une distance
minimale de 20 cm entre le radiateur et votre corps.
F CauǺons
• Do not replace battery with an incorrect type.
• Do not disposal battery into fire or a hot oven, or mechanically crushing or
cutting of a battery, that can result in an explosion.
• Do not leaving battery in an extremely high temperature surrounding
environment that can result in an explosion or the leakage of flammable liquid
or gas.
• Do not leaving battery subjected to extremely low air pressure that may result
in an explosion or the leakage of flammable liquid or gas.
• Do not used in low air pressure at high altitude condition.
• Do not used in high or low extreme temperatures.
*The driving assistance funcǺon oĔhe device only sends alarm or warning to
the driver and cannot replace the driver’s judgement and operaǺon. With the
device, you also should drive carefully to avoid traffic accident or violaǺon.
Pedestrian or object recogniǺon failure or recogniǺon error may occur due to
external factors. DO NOT overly rely on the driving assistance funcǺon.


Produktspezifikationen

Marke: Hikvision
Kategorie: Dashcam
Modell: AE-DC2018-D1

Brauchst du Hilfe?

Wenn Sie Hilfe mit Hikvision AE-DC2018-D1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Dashcam Hikvision

Bedienungsanleitung Dashcam

Neueste Bedienungsanleitung für -Kategorien-