Gossen Metrawatt SMARTCONTROL Bedienungsanleitung

Gossen Metrawatt Smarth-Startseite SMARTCONTROL

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Gossen Metrawatt SMARTCONTROL (24 Seiten) in der Kategorie Smarth-Startseite. Dieser Bedienungsanleitung war fĂĽr 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/24
Operating Instructions
 
SMART CONTROL | ECS 3-349-423-03
Energy Management-System 4/5 9.1
2013
Please note: This software is protected by German copyright and international treaties.
Unauthorized copying or distribution of this software, either in part or in its entirely, is subject
to prosecution by law.
2 -I Messtechnik GmbH GMC
1 Range of Applications
Diverse Data Collector and Data Messenger
The SMARTCONTROL renders energy consumption measurable without delay in a detailed
fashion, and thus controllable. This, in turn, is the basic prerequisite for a great variety of
measures for the reduction of energy consumption and costs, for example with regard
to:
- Optimized utilization
- Contracting
- Component modernization
- Conversion
The SMARTCONTROL is an inexpensive, user-friendly, easy to integrate data logging
system. This is the prerequisite for quickly establishing efficient, sustainable, widespread
energy management for buildings and properties.
Amongst other data, the SMARTCONTROL is capable of recording the following:
- Meter readings (electrical power, heat, water, gas etc.)
- Temperatures (inside, outside, inlet, return etc.)
- Statuses (burner and pump on-times etc.)
- Analog signals from external signal converters and measuring transducers (pressure,
humidity etc.)
- M-Bus protocol (up to 450 meters), ModBus, SBus, CLBus, LON
One of the system’s important advantages is its ability to access all relevant data at any
t quickly and conveniently. ime –
We are at your disposal and can provide you with solutions if you want to make actual
energy consumption more transparent in the future, and optimize it as well.
Information regarding all facets of GMC-I Messtechnik GmbH, as well as other industry
information, can be accessed at:
GMC-I Messtechnik GmbH
SĂĽdwestpark 15
90449 NĂĽrnberg, Germany
Phone: +49 (0) 911 8602-111
Fax: +49 (0) 911 8602-777
e-mail: info@gossenmetrawatt.com
Internet: www.gossenmetrawatt.com
Operating Instructions
3 -I Messtechnik GmbH GMC
Table of Contents
1 SMARTCONTROL Manager Software .............................................................. 5
1.1 Installation .................................................................................................... 5
1.2 Overview ....................................................................................................... 6
1.3 User Interface ............................................................................................... 6
Menu Bar ............................................................................................................. 6
Toolbar(s) ............................................................................................................ 7
Status Line 8..........................................................................................................
Scenario Browser .................................................................................................. 9
Network Toolbar ................................................................................................... 9
Data Toolbar ...................................................................................................... 10
OPC Server Toolbar ............................................................................................. 10
Toggle Tab Bars .................................................................................................. 10
Message Window ................................................................................................ 10
Numeric Format for Entering Values ....................................................................... 11
1.4 Entering Projects, Buildings and Devices With the Application Assistant .... 11
1.5 Entering Projects, Buildings and Devices Without the Application Assistant 12
1.6 The “Configuration” Tab .............................................................................. 16
TCP/IP ............................................................................................................... 16
Router ............................................................................................................... 16
e-mail Recipients ................................................................................................ 17
TCP/IP Recipients ................................................................................................ 17
Phone Recipients ................................................................................................. 18
Configuring Error Indication Tip: Refer to the online help as well! .............................. 19
Time ................................................................................................................. 21
Modem .............................................................................................................. 23
Information ........................................................................................................ 23
1.7 The “Calibration” Tab .................................................................................. 24
Temperature Sensor ............................................................................................ 24
A-D Converter .................................................................................................... 25
Meter (digital inputs) ........................................................................................... 26
Status (digital inputs) .......................................................................................... 28
Relay Start Status ............................................................................................... 28
Access Rights ..................................................................................................... 29
1.8 The “Programming” Tab, Commands ........................................................... 30
Program Priorities ............................................................................................... 33
Program Command Attributes in Tabular View ......................................................... 34
Finding Program Commands ................................................................................. 35
Transmitting Programs to the SMARTCONTROL and Starting Them ............................. 35
Restarting the SMARTCONTROL ............................................................................36
M-Bus Command Type ......................................................................................... 37
M-Bus Application Command Type ......................................................................... 39
Calculator Command Type .................................................................................... 41
Formula Calculator Command Type ........................................................................ 43
Timer Program Command Type ............................................................................. 46
Multifunctional Timer Command Type Tip: Refer to the online help as well! ................. 48
Power Calculator Command Type Tip: Refer to the online help as well! ..................... 50

Produktspezifikationen

Marke: Gossen Metrawatt
Kategorie: Smarth-Startseite
Modell: SMARTCONTROL

Brauchst du Hilfe?

Wenn Sie Hilfe mit Gossen Metrawatt SMARTCONTROL benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Smarth-Startseite Gossen Metrawatt

Gossen Metrawatt

Gossen Metrawatt SMARTCONTROL Bedienungsanleitung

31 August 2024

Bedienungsanleitung Smarth-Startseite

Neueste Bedienungsanleitung fĂĽr -Kategorien-

Elro

Elro AB600S-2 Bedienungsanleitung

14 Oktober 2024
ETiger

ETiger ES-D4A Bedienungsanleitung

4 Oktober 2024
Netgear

Netgear Orbi RBS50Y Bedienungsanleitung

2 Oktober 2024
Shelly

Shelly Qubino Wave 1PM Mini Bedienungsanleitung

1 Oktober 2024
Abus

Abus Z-Wave Gateway Bedienungsanleitung

27 September 2024
Chacon

Chacon 54650 Bedienungsanleitung

27 September 2024
EZVIZ

EZVIZ DL01 Pro Bedienungsanleitung

24 September 2024
Busch-Jaeger

Busch-Jaeger 2CKA006220A0006 Bedienungsanleitung

23 September 2024
JUNG

JUNG A 5192 KRM TS D Bedienungsanleitung

21 September 2024
Acer

Acer Air Monitor AM100 Bedienungsanleitung

20 September 2024