Golden Lighting Torbellino 8106-3P CDB Bedienungsanleitung

Golden Lighting Erleichterung Torbellino 8106-3P CDB

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Golden Lighting Torbellino 8106-3P CDB (3 Seiten) in der Kategorie Erleichterung. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/3

Canopy

1ea

Mounting

Screws 2ea Top loop 1ea

Chain 6ft Wire connectors 3ea Bottom cap 1ea

Chain connector 2ea

Canopy loop

and Canopy

loop collar

1ea Nipple 2ea

Mounting Strap 1ea Hex Nut 2ea Finial 1ea

Part Needed Quantity

Reason why ( missing, scratched, broken glass, bent, bad nish)

Comments

F A IIXTURE SSEMBLY NSTRUCTIONS

For Customer Service, contact the place of purchase to arrange for replacement parts.

NOTE: INSTALL THE GLASS ASSEMBLY

AFTER THE FIXTURE IS HUNG.

1. Thread the Body (L) onto the Coupling (M) and

until tight.

2. Then screw the Top Loop (J) to the threaded

Nipple (K) at top of Frame until tight.

8106-3P CDB

Read and review installation instruction sheet before

assembling the xture.

Fig 1

PARTS & ASSEMBLY SHEET

This xture assembled PO:__________ Date: ________

Fixture Name: Torbellino 8106-3P CDB

Notice: Please review the parts listing and check for all parts before assembling the xture. If any parts are

missing or damaged, please note onthis sheet and contact the place of purchase to arrange for

replacement parts.

PARTS LIST Company Name:_______________________Co. Account #:_____________

to be lled out by retailer

For Customer Service, contact the place of purchase to arrange for replacement parts.

3. By measuring determine correct number of links

needed for proper hanging height. Use a pair of

pliers to open one link of the Chain (C2) then

remove the excess Chain (C2) and discard it.

4. Use one chain connector(E2) to attach one end of

the chain to the Top loop (D2) and close the chain

connector.

5. Feed the xture wires through the Chain (every

three links) and pull the wires until taut.

6. Slip Canopy loop collar (B2) over the chain, then

do the same with the canopy (F2).

7. When ready to complete the installation Use the

other chain connector and attach the other end of

the chain to the canopy loop (A2) and close the

chain connector.

8. Make sure the weight of the chandelier is

supported by the chain-not the electrical wire.

* You may now install the xture.

Fig 2

PARTS & ASSEMBLY SHEET

Fixture Name: Torbellino 8106-3P CDB

NOTE: Complete these remaining steps after the

xture is hung.

9. Thread the Nipple (P) into the Coupling (N), and

then thread the Hex Nut (Q) onto Nipple (P) until

tight.

10. Install the light bulbs in accordance with the

xture’s specications.

11. Place Glass Shade (R) over the Metal Ring .

The Nipple (P) shall protrude through the bottom

hole of the Glass Shade (R).

12. While holding the Glass Shade slide the

13. Slide Bottom Cap (U) over Nipple (P) and thread

the Finial (V) until tight.

(DO NOT EXCEED THE MAXIMUM WATTAGE

RATING)

Fig 3

CHAIN

For Customer Service, contact the place of purchase to arrange for replacement parts.

7. Unscrew the Canopy loop collar (H) from the Canopy loop. Take the

canopy and pass over the Canopy loop. approximatly one half of the

canopy loop exterior threads should be exposed. Adjust until desired

height is reached. *the Canopy loop collar should t snugly on the

Canopy loop after the canopy is installed. Remove Canopy and Canopy

lock collar.

8. Assemble the xture and have an assistant or secure support hold the

weight of the xture while you complete the wiring connections.

9.Thread the xture wires and ground wire of the assembled xture

through the canopy loop and nipple and into the outlet box.

WARNING ! SHUT OFF POWER AT FUSE OR CIRCUIT BREAKER.

HANGING THE FIXTURE (Fig.1)

1. Carefully remove the new xture from the carton and the yellow bag

that holds all parts. Check that all parts are included as shown in the

illustration and parts list.

2. Shut o the power at the circuit breaker and remove old xture from

ceiling, including the old mounting strap.

3. Thread Nipple(C) into Canopy Loop (F) until snug.

4. Thread other end of the Nipple (C) with Canopy Loop attached into

Mounting Strap (D).

5. Place Lock Washer (B) over end of Nipple (C) protruding through

Mounting Strap (D) and thread Hex Nuts (A) onto Nipple until tight.

6. Take this mounting strap assembly and mount to ceiling junction box

with junction box Screws (E). Tighten screw securely with screw driver.

Fig. 1

CONNECTING THE WIRES (Fig 2)

10. Attach the power supply wires to the xture lead wires by connecting

BLACK to BLACK (or SMOOTH) and WHITE to WHITE (or RIBBED).

11. Attach the GROUND wire(GREEN or COPPER) from the Junction

Box and the xture Ground wire to the green Ground Screw on the

Mounting Bracket (D) or connect both wires together using the correct

size of wire connectors.

NOTE: Twist the wires together in the same direction you twist the wire

connector onto the wires.

12. Tuck these wire connections neatly into the Junction Box.

Fig. 2

13. Raise Canopy (G) to the ceiling and secure in place by tightening the

Canopy loop collar(H) into the Canopy Loop(F)

14. Install the light bulbs and glass shade as per the xture assembly

sheet.

YOUR INSTALLATION IS NOW COMPLETE.

RETURN POWER TO THE JUNCTION BOX

AND TEST THE FIXTURE.

INSTALLATION INSTRUCTIONS

Fixture Name: Torbellino 8106-3P, BP3 CDB

For Chandelier Light Fixture

CHAIN

JUNCTION BOX

(CEILING)

Produktspezifikationen

Marke:	Golden Lighting
Kategorie:	Erleichterung
Modell:	Torbellino 8106-3P CDB

Brauchst du Hilfe?

Wenn Sie Hilfe mit Golden Lighting Torbellino 8106-3P CDB benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Erleichterung Golden Lighting

Golden Lighting Torbellino 8106-3P CDB Bedienungsanleitung

1 Oktober 2024

Golden Lighting Heartwood 8063-M1L BUS Bedienungsanleitung

1 Oktober 2024

Golden Lighting Malta 0511-3P BCB-CLR Bedienungsanleitung

1 Oktober 2024

Golden Lighting Alcott 0890-6 ABI Bedienungsanleitung

1 Oktober 2024

Golden Lighting Brigham 4305-OWL NB-CLR Bedienungsanleitung

1 Oktober 2024

Golden Lighting Olympia 1648-1W BUS Bedienungsanleitung

1 Oktober 2024

Golden Lighting Olympia 1648-M1L BUS Bedienungsanleitung

1 Oktober 2024

Golden Lighting Madera 1821-M1L BI Bedienungsanleitung

1 Oktober 2024

Golden Lighting Marco 6068-1W GMT Bedienungsanleitung

1 Oktober 2024

Golden Lighting Orwell 3306-BA3 Bedienungsanleitung

1 Oktober 2024

Bedienungsanleitung Erleichterung

Neueste Bedienungsanleitung für -Kategorien-

Goobay 30780 Bedienungsanleitung

16 Oktober 2024

AFX Grace GRCP07CBBK Bedienungsanleitung

13 Oktober 2024

AFX Point PNTP0107L30D1BK Bedienungsanleitung

13 Oktober 2024

Smartwares 20.003.54 Bedienungsanleitung

9 Oktober 2024

Neewer TL97C Bedienungsanleitung

8 Oktober 2024

Neewer SRP18C Bedienungsanleitung

8 Oktober 2024

Qtx Moonglow Bedienungsanleitung

7 Oktober 2024

Blumfeldt Shinecube XL Bedienungsanleitung

7 Oktober 2024

Qtx HPWash100 Bedienungsanleitung

6 Oktober 2024

BeamZ DJ X5 Bedienungsanleitung

5 Oktober 2024