Golden Lighting Madera 1821-M1L BI Bedienungsanleitung

Golden Lighting Erleichterung Madera 1821-M1L BI

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Golden Lighting Madera 1821-M1L BI (3 Seiten) in der Kategorie Erleichterung. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/3
Canopy Wire Connectors Hex Nut
1ea @5-1/2"X1-1/2" 3ea P4 Orange
Chain Junction Box
Screw Spring Washer
1ea 6ft x3.8mm 2ea 8/32" x 1" 1ea @15 x 2mm
Chain Connector Nipple
2ea @4.2X50mm 1ea @3/8 x 40mm x 5mm 1ea @3/8 x 50mm
Mounting Strap
w/ ground screw
1ea 3/4"X4"
Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
Fig. 1
For Customer Service, contact the place of purchase to arrange for replacement parts.
PARTS & ASSEMBLY SHEET
1821-M1L BI
Read and review installation instruction sheet before
assembling the fixture.
FIXTURE ASSEMBLY INSTRUCTIONS
This fixture assembled PO:__________ Date: ________
Fixture Name: Madera 1821-M1L BI
Canopy Loop
with Collar
ASSEMBLING THE FIXTURE (Fig. 1)
* the glass shade should come with the metal cage already
attached.
1. Place each small screw (N) and washer (P) through
holes on inside of glass shade (O), add another washer (P)
on the outside of glass shade.
2. Lower metal cage (M) over glass shade, lining the holes
up with the screws and turn the small screw until tight to
secure the cage to the glass shade.
Notice:
Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing or
damaged, please note on this sheet and contact the place of purchase to arrange for replacement parts.
PARTS LIST
Company Name:_______________________Co. Account #:_____________
to be filled out by retailer
2ea @3/8 x 3mm
M
N
OP
P
For Customer Service, contact the place of purchase to arrange for replacement parts.
d
Fig. 2
PARTS & ASSEMBLY SHEET
Fixture Name: Madera 1821-M1L BI
C
D
ASSEMBLING THE FIXTURE (Fig. 2)
4. Place the Socket/Top loop assembly (J) on
Glass shade (M/O).
5. Holding these pieces together, slide the Spacer
(Q) on socket and secure it by threading the Socket
ring (R) onto the threaded socket until tight.
6. By measuring determine correct number of links
needed for proper hanging height. Use a pair of
pliers to open one link of the Chain (K) then remove
the excess Chain (K) and discard it.
7. Use one chain connector (L) to attach one end of
the chain to the Top loop (J) and close the chain
connector.
8. Feed the fixture wires through the Chain (every
three links) and pull the wires until taut.
9. Slip Canopy loop collar (H) over the chain, then
do the same with the canopy (G).
10. When ready to complete the installation Use
the other chain connector and attach the other
end of the chain to the canopy loop (F) and close
the chain connector.
11. Make sure the weight of the chandelier will be
supported by the chain-not the electrical wire.
* You may now install the fixture.
Note: Complete these remaining steps after the
fixture is hung.
12. Install the light bulb (not provided) in
accordance with the fixture's specifications.
(DO NOT EXCEED MAXIMUM WATTAGE RATING)
Bulb
(Not Provided)
For Customer Service, contact the place of purchase to arrange for replacement parts.
Fig. 2
YOUR INSTALLATION IS NOW COMPLETE.
RETURN POWER TO THE JUNCTION BOX
AND TEST THE FIXTURE.
INSTALLATION INSTRUCTIONS
Fixture Name: Madera 1821-M1L BI
For Pendant Light Fixture
WARNING ! SHUT OFF POWER AT FUSE OR CIRCUIT BREAKER.
Fig. 1
L
B
C
A
JUNCTION BOX
(CEILING)
D
E
F
H
CHAIN
G
HANGING THE FIXTURE (Fig. 1)
1. Carefully remove the new fixture from the carton and
the yellow bag that holds all parts. Check that all parts are
included as shown in the illustration and parts list.
2. Shut off the power at the circuit breaker and remove old
fixture from ceiling, including the old mounting strap.
3. Thread Nipple(C) into Canopy Loop (F) until snug.
4. Thread other end of the Nipple (C) with Canopy Loop
attached into Mounting Strap (D).
5. Place Lock Washer (B) over end of Nipple (C)
protruding through Mounting Strap (D) and thread Hex
Nuts (A) onto Nipple until tight.
6. Take this mounting strap assembly and mount to
ceiling junction box with junction box Screws (E). Tighten
screw securely with screw driver.
7. Unscrew the Canopy loop collar (H ) from the Canopy
loop. Take the canopy and pass over the Canopy loop.
approximatly one half of the canopy loop exterior threads
should be exposed. Adjust until desired height is reached.
*the Canopy loop collar should fit snugly on the Canopy
loop after the canopy is installed. Remove Canopy and
Canopy lock collar.
8. Assemble the fixture and have an assistant or secure
support hold the weight of the fixture while you complete
the wiring connections.
9. Thread the fixture wires and ground wire of the
assembled fixture through the canopy loop and nipple and
into the outlet box.
CONNECTING THE WIRES (Fig. 2)
10. Attach the power supply wires to the fixture lead
wires by connecting BLACK to BLACK (or SMOOTH) and
WHITE to WHITE (or RIBBED).
11. Attach the GROUND wire(GREEN or COPPER) from
the Junction Box and the fixture Ground wire to the green
Ground Screw on the Mounting Bracket (D) or connect
both wires together using the correct size of wire
connectors.
NOTE: Twist the wires together in the same direction you
twist the wire connector onto the wires.
12. Tuck these wire connections neatly into the Junction
Box.
13. Raise Canopy (G) to the ceiling and secure in place
by tightening the Canopy loop collar (H) into the Canopy
Loop (F).

Produktspezifikationen

Marke: Golden Lighting
Kategorie: Erleichterung
Modell: Madera 1821-M1L BI

Brauchst du Hilfe?

Wenn Sie Hilfe mit Golden Lighting Madera 1821-M1L BI benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Erleichterung Golden Lighting

Golden Lighting

Golden Lighting Torbellino 8106-3P CDB Bedienungsanleitung

1 Oktober 2024
Golden Lighting

Golden Lighting Heartwood 8063-M1L BUS Bedienungsanleitung

1 Oktober 2024
Golden Lighting

Golden Lighting Malta 0511-3P BCB-CLR Bedienungsanleitung

1 Oktober 2024
Golden Lighting

Golden Lighting Alcott 0890-6 ABI Bedienungsanleitung

1 Oktober 2024
Golden Lighting

Golden Lighting Brigham 4305-OWL NB-CLR Bedienungsanleitung

1 Oktober 2024
Golden Lighting

Golden Lighting Olympia 1648-1W BUS Bedienungsanleitung

1 Oktober 2024
Golden Lighting

Golden Lighting Olympia 1648-M1L BUS Bedienungsanleitung

1 Oktober 2024
Golden Lighting

Golden Lighting Madera 1821-M1L BI Bedienungsanleitung

1 Oktober 2024
Golden Lighting

Golden Lighting Marco 6068-1W GMT Bedienungsanleitung

1 Oktober 2024
Golden Lighting

Golden Lighting Orwell 3306-BA3 Bedienungsanleitung

1 Oktober 2024

Bedienungsanleitung Erleichterung

Neueste Bedienungsanleitung für -Kategorien-

Goobay

Goobay 30780 Bedienungsanleitung

16 Oktober 2024
AFX

AFX Grace GRCP07CBBK Bedienungsanleitung

13 Oktober 2024
AFX

AFX Point PNTP0107L30D1BK Bedienungsanleitung

13 Oktober 2024
Smartwares

Smartwares 20.003.54 Bedienungsanleitung

9 Oktober 2024
Neewer

Neewer TL97C Bedienungsanleitung

8 Oktober 2024
Neewer

Neewer SRP18C Bedienungsanleitung

8 Oktober 2024
Qtx

Qtx Moonglow Bedienungsanleitung

7 Oktober 2024
Blumfeldt

Blumfeldt Shinecube XL Bedienungsanleitung

7 Oktober 2024
Qtx

Qtx HPWash100 Bedienungsanleitung

6 Oktober 2024
BeamZ

BeamZ DJ X5 Bedienungsanleitung

5 Oktober 2024