GE ZKHTC1 Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr GE ZKHTC1 (40 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂĽr 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/40
GE Monogram®
36" Bottom Mount
Refrigerators
Custom
Options Guide
and
Installation
Instructions
With Custom Panel Dimensions
and Trim Kit Installation Instructions
Models:
ZIC36N RH
ZIC36N LH
These Monogram refrigerators are
designed to be customized with decorator
door and grille panels. Field installed
panels are required.
Factory installed trim will accommodate
1/4" thick custom panels or optional
Lexan® and stainless steel panel kits.
Optional trim kits allow an even broader
range of custom appearance options.
Read this booklet carefully to accomplish the
desired appearance and to insure a trouble free
installation.
This booklet contains information and
illustrations to demonstrate custom
possibilities. Custom door and grille panel
sizes vary to accommodate the kit being
used. Dimensions for each application are
included and can be faxed or sent to the
cabinet manufacturer so that the panels can
be constructed accurately.
Before you begin - Read these instructions completely and carefully.
IMPORTANT - Save these instructions for local inspector’s use.
IMPORTANT - OBSERVE ALL GOVERNING CODES AND ORDINANCES.
Note to Installer - Be sure to leave these instructions with the Consumer.
Note to Consumer - Keep these instructions with your Use and Care Book for future reference.
This appliance must be properly grounded. See “Grounding the Refrigerator,” page 12.
Monogram
36" Bottom Mount Refrigerator
2
Contents
Design Information
Flush or Semi-Flush Enclosure Installations ............................................................................................................................... 3
Enclosure Cutout and Product Dimensions ................................................................................................................................. 3
Installation Examples, Between Base & Wall Cabinets ........................................................................................................... 4
Installation at End-of-Run ............................................................................................................................................................... 4
Frameless Cabinets .......................................................................................................................................................................... 4
Accessory Panel Kits ....................................................................................................................................................................... 4
Models Available .............................................................................................................................................................................. 5
Advance Planning Exterior Appearance Options ....................................................................................................................... 5
Trim Kit Descriptions ........................................................................................................................................................................ 6
Custom Panel Dimensions
Product and Cutout Information .................................................................................................................................................... 7
1/4" Thick Custom Panels or Panels Secured to 1/4" thick backing ........................................................................................ 8
3/4" Thick Panels with Supplied Handle, ZKTC36L or ZKTC36R ............................................................................................... 9
3/4" Thick Panels with Custom Handle ....................................................................................................................................... 10
Side Panel or Filler Options .......................................................................................................................................................... 11
Installation Instructions ........................................................................................................................................................... 12-17
Trim Kits
ZGC2 Trim Kit, Grille Panel Frame Adjustment .......................................................................................................................... 18
ZKHC1 Trim Kit (for 1/4" Panels), Support for Custom Handles ......................................................................................... 19-21
ZKTC36L/ZKTC36R Trim Kit, 3/4" Custom Panels .................................................................................................................. 22-27
ZKHTC1 Trim Kit (for 3/4" Panels), Support for Custom Handles ...................................................................................... 28-31
ZKHCSS1 Trim Kit (for 1/4" Panels), Tubular Stainless Steel Handles .............................................................................32-35
ZKHTCSS1 Trim Kit (for 3/4" Panels), Tubular Stainless Steel Handles ...........................................................................36-38
ZFC1 Trim Kit, for side to side installation .................................................................................................................................. 39
If you have a question concerning the installation of this
product, call the GE Answer Center® Consumer
Information Service at 800.626.2000, 24 hours a day,
7 days a week.
If you received a damaged refrigerator, you should
immediately contact your dealer or builder.
Proper installation is the responsibility of the installer.
Product failure due to improper installation is not
covered under the GE Appliance Warranty. See the
Use & Care Guide for warranty information.
WARNINGS:
• Use this appliance only for its intended purpose.
• Immediately repair or replace electric service cords
that become frayed or damaged.
• Unplug the refrigerator before cleaning or making
repairs.
• Repairs should be made by a qualified service
technician.
For Monogram local service in your area,
1-800-444-1845.
For Monogram service in Canada
1-888-880-3030
For Monogram Parts and Accessories, call
1-800-626-2002.
3
Design Information
36" Bottom Mount Refrigerators
Flush or
Semi-Flush
Enclosure
Installations
Side Panels Requirements:
• Side panels are not required whenever the
refrigerator is installed into an enclosure or between
pantry and oven cabinets.
• Side panels are required whenever the sides of the
refrigerator are exposed.
• Side panel sizes vary depending on the type of
installation being made.
To accomplish an attractive installation, you must:
1. Determine the need for side panels.
2. Determine side panel thickness.
3. Order matching side panels from the cabinet
manufacturer. Be sure to provide the exact dimen-
sions.
True Flush Installation
In a flush installation,
the refrigerator doors
will align evenly with the
front face of adjacent cabinet
doors. The refrigerator blends
into the surrounding cabinetry.
Semi-Flush Installation
These refrigerators
can also be installed
semi-flush into an enclosure
using the minimum cutout
width. The case trim creates a
frame around the opening.
Monogram built-in refrigerators can be installed flush
with typical 24-3/4" deep cabinetry.
When installed semi-flush, the case trim will conceal
slight gaps around the enclosure. The refrigerator will
project forward approximately 3/4" beyond the front
face of surrounding cabinetry.
In any installation situation, a wide range of appear-
ance options can be accomplished through the use of
one or more trim kits. See trim kit descriptions and
appearance options on page 6.
Enclosure
Cutout and
Product
Dimensions
• To achieve a flush fit the finished cutout width must
be at least 36" wide.
• A semi-flush installation requires 35-1/2" min. finished
cutout width.
• The electrical and water locations must be located as
shown for either type of installation.
*36" Min. for a flush installation
35-1/2" Min. for a semi-flush installation
Note: Additional cutout width may be required when
side panels are used. Add side panel thickness to the
finished cutout to calculate rough-in width. See
installation examples on the following page.
Advance Planning
0"
3/4"
36"
83-1/2" Min
84-1/2" Max
24-3/4"
7"
Wall View
Electrical
Area
84 1/2" max
83 1/2" min
Finished
Opening
74" From Floor
to
Bottom
of Electrical
5"
5" 3 1/2"
5"
3 1/2"
Water Supply
24 3/4" Total
Depth
*Finished Width
7 1/2"


Produktspezifikationen

Marke: GE
Kategorie: Nicht kategorisiert
Modell: ZKHTC1

Brauchst du Hilfe?

Wenn Sie Hilfe mit GE ZKHTC1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert GE

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂĽr -Kategorien-