Gasmate Voyager BQ1075 Bedienungsanleitung

Gasmate Grill Voyager BQ1075

Lesen Sie kostenlos die šŸ“– deutsche Bedienungsanleitung fĆ¼r Gasmate Voyager BQ1075 (16 Seiten) in der Kategorie Grill. Dieser Bedienungsanleitung war fĆ¼r 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/16
1
Important: Retain these instructions for future use.
Powerful 12MJ/h stainless steel burner for true
BBQ performance
Rotary ignition for easy lighting
Generous cooking area of 1600cm2
Satin enamel cast iron cooking surface
Integrated temperature gauge
Includes hose and regulator
LPG Caravan bayonet suitable (bayonet hose
not included)
Gas certiļ¬ed to Australian and
New Zealand Standards
Model No. BQ1075
03451 06/16
GasmateĀ® is a registered trademark of: Sitro Group Australia Pty Ltd www.gasmate.com.au
Aber Holdings Ltd - Hamilton, N.Z. www.gasmate.co.nz
For any queries or assistance call
Customer Service (Australia Only)
1300 174 876
Hours of operation: Monday to Friday 8am - 5pm EST
Do not return to place of purchase.
Keep your purchase receipt, this will be required to
make any claims under the 12 month warranty.
2
READ ME FIRST
GAS LEAK TESTING
It is important that you leak test the BBQ before ļ¬rst use and every time the gas
cylinder is reļ¬lled and reconnected to the BBQ.
To Complete Leak Test
ā€¢ Make sure all the control knobs are OFF.
ā€¢ In a small container, mix up a solution of water and detergent/soap.
ā€¢ Mix the solution well (about the same concentrate as washing up water).
ā€¢ Turn the cylinder ON by rotating the knob to open position.
ā€¢ Using a brush or spray bottle apply the soap solution to the gas line and each
join in the gas line including:
- the gas connection at the inlet of the BBQ
- all gas hose connections
- the gas connection at the gas cylinder
ā€¢ If bubbles appear, there is a gas leak.
ā€¢ If the leak is at the connection, re-tighten and re-seal.
ā€¢ If the leak is anywhere else or you cannot resolve the leak by tightening the
connection DO NOT PROCEED.
ā€¢ Replace gas hose and regulator.
ā€¢ Replacement hose and regulators can be purchased from your local BBQ
retail specialist.
3
GENERAL INFORMATION
Gas Installation Codes
ā€¢ Barbecues must be used in accordance with
the installation requirements of your gas
supply authority, or the Australian Standard
AS 5601.
ā€¢ Barbecues for use with bottled gas are
labelled ā€˜propane gasā€™ or ā€˜Universal L.P.Gā€™.
ā€¢ Barbecues for use with natural gas are
labelled ā€˜natural gasā€™ and must be installed by
an authorised person. Check the gas type sticker
attached to the barbecue.
Clearances
Minimum Clearances from combustible materials
must be:
Rear - 300mm
Sides - 300mm
Above - 1000mm
Speciļ¬cations
Barbecue speciļ¬cations can be found on the
data label attached to the barbecue body.
Hose connection thread is 5/8ā€-18 UNF.
IMPORTANT
Read these instructions carefully prior to
use. Familiarise yourself with the appliance
before connecting it to itā€™s gas container.
Keep these instructions for future reference.
IF YOU SMELL GAS
1. Shut off gas to the barbecue at its
source,
if possible.
2. Extinguish any open ļ¬‚ame.
3. Open hood.
4. If odour continues immediately call your
gas supplier or ļ¬re department.
Hose & Regulator Safety
The regulator and hose assembly supplied with
the barbecue are suitable for Propane Gas or
Universal L.P.G. only.
A gas regulator adjusted to have an outlet
pressure of 2.75kPa is supplied for connection to
the propane gas cylinder. The pressure regulator
and hose assembly supplied with the barbecue
must me used. Replacement pressure regulators
and hose assemblies must be those speciļ¬ed by
the barbecue manufacturer.
When connecting the hose and regulator
assembly to the gas cylinder, take care to avoid
unnecessary twisting of the ļ¬‚exible hose.
After the assembly has been secured, turn on
the gas and check for leaks by brushing a soap
and water solution over all connections.
If you are unable to correct the leak by tightening
the connections, turn off the gas and contact the
supplier immediately.
Always ensure the barbecue is kept away from
ļ¬‚ammable materials and the gas cylinder clear of
any heat source.
When changing over from an empty gas cylinder
to a full one make sure this procedure is carried
out in a well ventilated location, preferably
outside, away from people and away from any
sources of ignition; such as naked ļ¬‚ames, pilot
ļ¬‚ames, electric heaters/equipment.
Gas Cylinder Use & Safety
This is a low pressure barbecue and must
only be used with the regulator supplied. Your
barbecue is designed for use with 4.5Kg or 9Kg
propane gas cylinders certiļ¬ed to AS 2469.
The gas cylinder should be ļ¬lled by a reputable
gas supplier and visually inspected and re-
qualiļ¬ed at each ļ¬lling.
Always keep cylinder in an upright position.
Always close the cylinder valve when the
barbecue is not in use.
Do not subject gas cylinder to excessive heat.
NEVER STORE YOUR GAS CYLINDER INDOORS.
If you store your barbecue indoors, ALWAYS
disconnect the gas cylinder ļ¬rst and store the
cylinder safely outside.
Cylinders must be stored outdoors in a well
ventilated area out of reach of children, and must
not be stored in a building, garage or any other
enclosed area.


Produktspezifikationen

Marke: Gasmate
Kategorie: Grill
Modell: Voyager BQ1075

Brauchst du Hilfe?

Wenn Sie Hilfe mit Gasmate Voyager BQ1075 benƶtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Grill Gasmate

Bedienungsanleitung Grill

Neueste Bedienungsanleitung fĆ¼r -Kategorien-