Gasmate Odyssey 2T Bedienungsanleitung

Gasmate Grill Odyssey 2T

Lesen Sie kostenlos die šŸ“– deutsche Bedienungsanleitung fĆ¼r Gasmate Odyssey 2T (24 Seiten) in der Kategorie Grill. Dieser Bedienungsanleitung war fĆ¼r 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/24
Important: Retain these instructions for future use.
Powerful 28MJ/h stainless steel burners for true
BBQ performance
Rotary ignition for easy lighting
Removable grill circular section for wok cooking
Substantial cooking area of 2130cm2, satin enamel
cast iron cooking surface ā€“ Ā²/Ā³ grill and Ā¹/Ā³ hotplate
Durable die cast aluminium bowl and hood
Integrated temperature gauge ā€“ a must when roasting
Convenient side shelves for easy food preparation and
cooking ā€“ when not in use, they can be dropped down
High dome hood ā€“ 21cm ā€“ allows you to roast easily
Integrated trolley features wheels, BBQ tool hooks and
screen to discreetly hide gas cylinder and storage area
Supplied with hose and regulator so itā€™s ready to use
with a POL gas cylinder
Gas certiļ¬ed to Australian Standards
Model No. BQ10622
03397 07/20
GasmateĀ® is a registered trademark of:
Sitro Group Australia Pty Ltd www.gasmate.com.au
Aber Living, N.Z. www.gasmate.co.nz
2
READ ME FIRST
GAS LEAK TESTING
It is important that you leak test the BBQ before ļ¬rst use and every time the gas cylinder is reļ¬lled and
reconnected to the BBQ.
To Complete Leak Test
ā€¢ Make sure all the control knobs are OFF.
ā€¢ In a small container, mix up a solution of water and detergent/soap.
ā€¢ Mix the solution well (about the same concentrate as washing up water).
ā€¢ Turn the cylinder ON by rotating the knob to open position.
ā€¢ Using a brush or spray bottle apply the soap solution to the gas line and each join in the gas line including:
- the gas connection at the inlet of the BBQ
- all gas hose connections
- the gas connection at the gas cylinder
ā€¢ If bubbles appear, there is a gas leak.
ā€¢ If the leak is at the connection, re-tighten and re-seal.
ā€¢ If the leak is anywhere else or you cannot resolve the leak by tightening the connection DO NOT PROCEED.
ā€¢ Replace gas hose and regulator.
ā€¢ Replacement hose and regulators can be purchased from your local BBQ retail specialist.
3
GENERAL INFORMATION
Gas Installation Codes
ā€¢ Barbecues must be used in accordance with the
installation requirements of your gas supply authority,
or the Australian Standard AS 5601.
ā€¢ Barbecues for use with bottled gas are labelled
ā€˜propane gasā€™ or ā€˜Universal L.P.Gā€™.
ā€¢ Barbecues for use with natural gas are labelled
ā€˜natural gasā€™ and must be installed by an authorised
person. Check the gas type sticker attached to the
barbecue.
Clearances
Minimum Clearances from combustible materials
must be:
Rear - 300mm Sides - 300mm Above - 1000mm
Speciļ¬cations
Barbecue speciļ¬cations can be found on the data label
attached to the barbecue body.
Hose connection thread is 5/8ā€-18 UNF.
IMPORTANT
Read these instructions carefully prior to use.
Familiarise yourself with the appliance before
connecting it to itā€™s gas container. Keep these
instructions for future reference.
IF YOU SMELL GAS
1. Shut off gas to the barbecue at its source,
if possible.
2. Extinguish any open ļ¬‚ame.
3. Open hood.
4. If odour continues immediately call your gas
supplier or ļ¬re department.
Hose & Regulator Safety
The regulator and hose assembly supplied with the
barbecue are suitable for Propane Gas or Universal
L.P.G. only.
A gas regulator adjusted to have an outlet pressure of
2.75kPa is supplied for connection to the propane gas
cylinder. The pressure regulator and hose assembly
supplied with the barbecue must me used. Replacement
pressure regulators and hose assemblies must be those
speciļ¬ed by the barbecue manufacturer.
When connecting the hose and regulator assembly to the
gas cylinder, take care to avoid unnecessary twisting of
the ļ¬‚exible hose.
After the assembly has been secured, turn on the gas
and check for leaks by brushing a soap and water
solution over all connections.
If you are unable to correct the leak by tightening the
connections, turn off the gas and contact the supplier
immediately.
Always ensure the barbecue is kept away from ļ¬‚ammable
materials and the gas cylinder clear of any heat source.
When changing over from an empty gas cylinder to a
full one make sure this procedure is carried out in a well
ventilated location, preferably outside, away from people
and away from any sources of ignition; such as naked
ļ¬‚ames, pilot ļ¬‚ames, electric heaters/equipment.
Gas Cylinder Use & Safety
While changing over empty gas cylinder check hose
and regulator for damage and if necessary replace.
Replacement pressure regulators and hose assemblies
must be those speciļ¬ed by the barbecue manufacturer.
This is a low pressure barbecue and must only be used
with the regulator supplied. Your barbecue is designed
for use with 4.5Kg or 9Kg propane gas cylinders certiļ¬ed
to AS 2469.
The gas cylinder should be ļ¬lled by a reputable gas
supplier and visually inspected and re-qualiļ¬ed at each
ļ¬lling.
Always keep cylinder in an upright position. Always close
the cylinder valve when the barbecue is not in use.
Do not subject gas cylinder to excessive heat.
NEVER STORE YOUR GAS CYLINDER INDOORS.
If you store your barbecue indoors, ALWAYS disconnect
the gas cylinder ļ¬rst and store the cylinder safely outside.
Cylinders must be stored outdoors in a well ventilated
area out of reach of children, and must not be stored in a
building, garage or any other enclosed area.


Produktspezifikationen

Marke: Gasmate
Kategorie: Grill
Modell: Odyssey 2T

Brauchst du Hilfe?

Wenn Sie Hilfe mit Gasmate Odyssey 2T benƶtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Grill Gasmate

Bedienungsanleitung Grill

Neueste Bedienungsanleitung fĆ¼r -Kategorien-