Gabor UPM-360 Bedienungsanleitung
Gabor
Projector accessoire
UPM-360
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Gabor UPM-360 (12 Seiten) in der Kategorie Projector accessoire. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/12
User Manual
UPM-360
360° UNIVERSAL
PROJECTOR MOUNT
2
The Gabor UPM-360 Universal Projector Mount provides an easy solution for
mounting your projector to a flat or slanted ceiling or wall. Preassembled parts
make the installation process quick and simple. This mount offers a 1.5 NPT
universal attachment which allows for adaptable hardware installations, and
360° placement with adjustable sizing to fit most projectors. Mount your
projector at home, in your office’s conference room, or a school classroom for
unobstructed overhead viewing.
If you have safety concerns about installing this product, contact a qualified
professional or installation contractor.
If this product is missing hardware or there are defective parts,
visit www.madebygabor.com or call Customer Service at 212-594-2353.
Thank you for choosing Gabor.
• Read through the instructions carefully, and save this manual for future
reference.
• When installing this product, be sure to refer to the mounting instructions
detailed in this manual; failure to abide by the mounting instructions may
void the product warranty.
• It is strongly recommended that this product be installed by a qualified
professional or installation contractor; Gabor takes no responsibility for any
product damage or personal injury resulting from mishandling, incorrect
mounting, faulty assembly, or improper use of this product.
• Do not use this product for any device other than what it is intended for; the
exact specifications, size parameters, and weight limits are found in this
instruction manual.
• The provided hardware is for attaching the projector mount to wood studs or
to solid concrete.
• Do not exceed the maximum load capacity of 33 lb. (15 kg), as you risk
personal injury or damage to your equipment.
• Failure to provide adequate structural support for this product can result in
serious personal injury or damage to your equipment; it is the installer’s
responsibility to make sure the structure to which the product is attached
can support four times the combined weight of all the equipment.
• Do not overtighten the screws or supports, as this can lead to damage.
• Do not mount this product on structures that may be affected by vibrations
or noticeable impacts; do not install near a heater, fireplace, or any other
source of direct heat.
• This product contains small parts which can pose a choking hazard; keep out
of reach of children and pets.
• All images are for illustrative purposes only.
Safety Warnings
3
Produktspezifikationen
Marke: | Gabor |
Kategorie: | Projector accessoire |
Modell: | UPM-360 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Gabor UPM-360 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Projector accessoire Gabor
18 August 2024
Bedienungsanleitung Projector accessoire
- Projector accessoire Da-Lite
- Projector accessoire Sanyo
- Projector accessoire BenQ
- Projector accessoire Manhattan
- Projector accessoire Sony
- Projector accessoire Panasonic
- Projector accessoire Auna
- Projector accessoire Optoma
- Projector accessoire ViewSonic
- Projector accessoire Vogel's
- Projector accessoire Vision
- Projector accessoire Barco
- Projector accessoire NEC
- Projector accessoire Sanus
- Projector accessoire NewStar
- Projector accessoire Speaka
- Projector accessoire Projecta
- Projector accessoire Peerless
- Projector accessoire Chipolino
- Projector accessoire XGIMI
- Projector accessoire Chief
- Projector accessoire Konig & Meyer
- Projector accessoire Tempest
- Projector accessoire Gravity
- Projector accessoire Unicol
- Projector accessoire Roadinger
- Projector accessoire My Wall
Neueste Bedienungsanleitung für -Kategorien-
15 September 2024
13 September 2024
6 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024