Fredenstein F603B Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Fredenstein F603B (5 Seiten) in der Kategorie Mischpult. Dieser Bedienungsanleitung war für 22 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/5
F603B
Low-Q four Band
EQUALIZER
Operating Manual
Fredenstein F603B Equalizer
The F603B is a high performance Low-Q four band equalizer for tracking and mixing (Q = 0.8).
The F603B features passive LC (Inductor / Capacitor) filters combined with a very short signal
pass.
The low and high frequency filters are shelving types, while the mid frequencies are band pass
filters. Each shelving filter has four different frequencies while the band pass filters offer six. The
active filter range is indicated by LEDs. To facilitate sound comparisons, a true “hard” bypass is
available. The gain range for each filter is +- 16 dB. All filters are switched by relays to guaranty
the highest possible sound quality. The F603B exhibits unrivaled silkiness , but at the same time an
extremely detailed sound stage. The high power output stage with an impedance of less than 20
Ohms and a driving capability of up to +- 200mA ensures no loss of performance with even the
most demanding complex loads.
As all Fredenstein products, the F603B is designed by a German-American team and manufactured
in Taiwan.
Overview:
Clip Indicator
Threshold + 24 dBu
Rotary Controls:
HI : High Frequency Gain
HI MID : High Mid Gain
LOW MID : Low Mid Gain
LOW : Low Frequency Gain
Switches:
HI : up/down to select High Frequency
shelving filter band
HI MID : up/down to select Hi Mid band pass
filter frequency
LOW Mid : up/down to select Low Mid band pass
filter frequency
LOW : up/down to select Low Frequency
shelving filter band
BYPASS : Hard Bypass function when lit
Fredenstein F603B Manual V1.1 July 18, 2014 Page 1
Fredenstein F603B Equalizer
Installation:
Please power down your rack or box first, before inserting the F603B. The power requirements are
maximum +/-16V, +/-200mA. In case you don't use a Fredenstein Bento, please make sure your box
or rack can support the current. Please consult your third party documentation in case of any doubt.
User Controls:
High Frequency Control:
Select the desired corner frequency for the high frequency shelving filter by flipping the switch up
or down:
7000 Hz, 9000 Hz, 11 kHz and 13 kHz
High Frequency Gain:
Apply +/- 16 dB of high frequency gain.
Hi Mid Frequency Control:
Select the desired frequency for the hi mid frequency band pass filter by flipping the switch up or
down:
1000 Hz, 1500 Hz, 2000 Hz, 3000 Hz, 4000 Hz, Hz and 5000 Hz
Hi Mid Frequency Gain:
Apply +/- 16 dB of hi mid frequency gain.
Low Mid Frequency Control:
Select the desired frequency for the low mid frequency band pass filter by flipping the switch up or
down:
200 Hz, 250 Hz, 330 Hz, 450 Hz, 600 Hz, and 800 Hz
Low Mid Frequency Gain:
Apply +/- 16 dB of low mid frequency gain.
Low Frequency Control:
Select the desired corner frequency for the low frequency shelving filter by flipping the switch up or
down:
60 Hz, 85 Hz, 120 Hz, and 230 Hz
Low Frequency Gain:
Apply +/- 16 dB of low frequency gain.
Bypass:
Hard Bypass function if switch is lit. Signal on the output is the input signal, no amplifiers are in the
signal path (Filter Frequency LEDs will turn off).
The F603A automatically stores all parameters when turned off and reloads them on the next
power up, no need to fill out recall sheets. If inserted in a Bento D box, all parameters are displayed
on the LCD display.
Fredenstein F603B Manual V1.1 July 18, 2014 Page 2


Produktspezifikationen

Marke: Fredenstein
Kategorie: Mischpult
Modell: F603B

Brauchst du Hilfe?

Wenn Sie Hilfe mit Fredenstein F603B benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Mischpult Fredenstein

Bedienungsanleitung Mischpult

Neueste Bedienungsanleitung für -Kategorien-