FiiO UTWS5 Bedienungsanleitung

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für FiiO UTWS5 (5 Seiten) in der Kategorie niet gecategoriseerd. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/5
快速入门指
Quick Start Guide
型号:UTWS5
Instructions for multifunction button of the earhook
Instructions for multifunction button of the charging case & indicator
light
(Notes: Before using, please tear the insulated gummed paper off on the metal contact of the
earhook.)
Triple click: Activate voice assistant
L
R
Long press: Next track, hang up, decline
a call
Double click: Pause
Single click: Resume playback,
decrease volume, answer a call
Long press: Previous track, hang
up, decline a call
Left and right earhooks are fully
charged: White light keeps
constantly on for about 15s before
going off. (The indicator light will
stay ON if the charging case (case
lid closed) is connected to a USB
or if the earhooks are charged with
the case lid opened.)
Remaining power indication (indicates
when opening the case every time.)
21%~100%: White light constantly on for 5s
20%~0%: Red light constantly on for 5s.
Double click: Pause
Operation instructions for the multifunction
button of the charging case:
Enter pairing state: Long press the
multifunction button for about 3s;
Reset: Long press the multifunction button for
about 12s;
Short press: Display the remaining power of
the charging case.
Charging case status indication:
Charging: White light pulses (case lid
closed);
Fully charged: White light constantly on (case
lid closed).
Earhook (in the case) status indication:
Pairing: Red&white light flash alternately.
Triple click: Activate voice assistant
Single click: Resume playback,
increase volume, answer a call
Notes:
1) When the charging case is opened, the earhooks will power on and enter the
pairing/reconnecting state, which means they can be searched for and connected to.
2) After taking the 2 earhooks out of the charging case and then putting them back,
they will enter the charging state. The corresponding indicator light of the charging
case indicates the charging state of each earkook.
3) When opening the case, the middle indicator light will indicate the remaining
power of the charging case.
Power on
1) When opening the charging case, the UTWS5 will turn on automatically. (The one
never been connected will auto-enter pairing state when powering on for the first
time.)
2) If the UTWS5 is outside the charging case (off state), hold the multifunction button
for about 1s to turn it on. After being turned on, it can automatically reconnect to the
last-connected device.
Power off
If the UTWS5 is outside the case (on state), hold the multifunction button for about 5s
to turn it off. Or to turn it off in the Settings menu of the FiiO Control APP.
Pairing mode
1) If the UTWS5 is inside the charging case, it can enter pairing state by pressing the
multifunction button on the case for about 3s after opening the case.
2) If the UTWS5 is outside the case, it can enter pairing state by corresponding
operation in the Settings menu of the FiiO Control APP.
(Note: When the charging case is opened over 3 minutes, the UTWS5 will no longer
respond to any commands of the multifunction button of the case. So please keep the
UTWS5 in the case and operate it within valid time.)
Factory data reset/Bluetooth pairing
Charging port of the charging case

Produktspezifikationen

Marke: FiiO
Kategorie: niet gecategoriseerd
Modell: UTWS5

Brauchst du Hilfe?

Wenn Sie Hilfe mit FiiO UTWS5 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung niet gecategoriseerd FiiO

Bedienungsanleitung niet gecategoriseerd

Neueste Bedienungsanleitung für -Kategorien-