FiiO BTA30 Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr FiiO BTA30 (5 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂĽr 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/5
Skip to content
Manuals+
User Manuals Simplified.
FiiO BTA30 DAC Transmitter User Guide
Home » » Fiio FiiO BTA30 DAC Transmitter User Guide
Quick Start Guide
Model: BTA30
Hi-Res Bluetooth Receiver and Transmitter
Buttons and Ports Labeled
A. Power button G. Line out
B. Power indicator light H. Optical output
C. Bluetooth state/Codec/Sampling rate indicator light I. Coaxial input/output
D. Pair/Pause button J. Optical input
E. Receiving/Transmitting/DAC mode switch K. External antenna port
F. Volume knob L. Power/Data port
Functions and Operations Instructions
Turn on: Short press button A after connecting to a USB device.
Turn off: When the device is on, hold button A for about 2s until indicator light B and C turn off.
Play/Pause: In RX/TX mode, short press button D.
Clear pairing: When the device is powering on and in RX/TX mode (not pairing state), hold button A+D at the same time for about 5s.
Force to pair: When the device is powering on and in RX/TX mode, hold button D for about 3s until indicator light C flashes alternately in red
and green.
Reconnecting state: Indicator light C quickly flashes twice every 2 seconds in green.
How to use the BTA30 with two Bluetooth devices simultaneously
Bluetooth receiving (RX): After a successful pairing with Device 1, hold the button D for around 3s to enter pairing mode again. Search for
“BTA30” on Device 2 and pair it with the BTA30. On Device 1, select “BTA30” in the device list and reconnect. You could also restart the BTA30
after a successful pairing with Device 2 in order to use the BTA30 with two Bluetooth devices simultaneously.
Bluetooth transmitting (TX): The connecting steps are similar to the RX connection. After successful pairings with the two receiving devices
respectively, restart the BTA30 in order to use it with the two Bluetooth receiving devices simultaneously. Note: When working in LDAC and
aptX LL Bluetooth codec in TX mode, the BTA30 cannot be connected to two Bluetooth devices simultaneously.
Audio input/output
Bluetooth receiving (RX): Bluetooth devices can search for “BTA30” and complete the connection through Bluetooth, outputting audios via the
BTA30’s line, coaxial or optical port ;
Note: Under this mode, the coaxial, optical, and line output can work at the same time.
Bluetooth transmitting (TX): The BTA30 can be connected to Bluetooth receiving devices, such as the BTR5 and BTR3K. (Audios can be
input to the BTA30 through its USB input, coaxial or optical port.)
Note:
1. Under the mode of USB in and Bluetooth out, the volume knob cannot work, and the LDAC codec is not supported.
2. IF it is connected to a Bluetooth receiving device, double click the PAIR button to switch Bluetooth codecs of the BTA30.
DAC: Connect the BTA30 to computers through the USB port, outputting audios via the BTA30’s line out, coaxial output or optical output; Or
decoding audio signals input by the BTA30’s coaxial and optical port, and output audios through the line out port.
Note:


Produktspezifikationen

Marke: FiiO
Kategorie: Nicht kategorisiert
Modell: BTA30
Bluetooth: Ja
Bluetooth-Version: 5.0
Breite: 120 mm
Tiefe: 55 mm
Produktfarbe: Schwarz
Höhe: 23.5 mm
Zweck: Haus
Digital Audio-Ausgang (koaxial): 1
Optischer Audio-Digitalausgang: 1
Line-Ausgänge (RCA): 1
Anzahl der USB-AnschlĂĽsse: 1

Brauchst du Hilfe?

Wenn Sie Hilfe mit FiiO BTA30 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert FiiO

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂĽr -Kategorien-