Extech 445713 Bedienungsanleitung

Extech Messung 445713

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung fĂŒr Extech 445713 (1 Seiten) in der Kategorie Messung. Dieser Bedienungsanleitung war fĂŒr 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/1
445713 en- -US_V1.3 10.20
User Guide
Big Digit Indoor/Outdoor
Hygro-Thermometer
Model 445713
 Simultaneously displays indoor/outdoor temperature and RH
 Selectable temperature units oC/oF
 MIN/MAX memory and recall
 For wall-mount or desktop use
Two-year Warranty
FLIR Systems, Inc. warrants this Extech brand to be free instrument
of defects in parts and workmanship for from date of shipment two years
(a six-month limited warranty applies to sensors and cables). To view the
full warranty text please visit: http://www.extech.com/support/warranties.
Calibration and Repair Services
FLIR Systems, Inc. oers calibration and repair services r the fo
Extech brand products we sell. We oer NIST traceable calibration for
most of our products. Contact us for information on calibration and repair
availability, refer to the contact information below. Annual calibrations
should be performed to verify meter performance and accuracy. Product
specications are subject to change without notice. Please visit our
website for the most up- -date product information: to www.extech.com.
Copyright - FLIR Systems, Inc. ©2013 2020
All rights reserved including the right of reproduction in whole or in part in any form
www.extech.com
Introduction
Congratulations on your purchase of Extech’s Big Digit Indoor/Outdoor
Hygro-Thermometer. This professional meter, with proper care, will
provide years of safe reliable service.
Specications
Range
Accuracy
Temperature
-10 to 60oC
14 to 140oF
+ 1.0oC within -10oC to 50oC
+ 1.8oF within 14oF to 122oF
Humidity
10% to 99%
+ 5% RH within 25% to 85% RH
(@ 73oF/23oC)
Battery
1.5V 'AAA' cell
Operation
1. Open the battery compartment by pushing the cover on the rear of
the instrument downward as indicated by the arrow. Remove the
battery safety strip and the protective cover on the LCD display. The
instrument is now ready for use.
2. The temperature units ( C) are selected via the switch located on °F/°
the rear of the instrument.
3. The upper display indicates the indoor humidity and temperature.
The lower display indicates outdoor, remote probe, humidity and
temperature.
4. Displaying the minimum and maximum values.
a. Press the MAX/MIN button. The highest value measured since the
Reset button was last pressed appears on the display.
b. Press the MAX/MIN button again to display the lowest value
measured since the Reset button was last pressed.
c. Press the MAX/MIN button again to return to normal display
operation.
5. Resetting (clearing) the MAX/MIN memory.
a. Press and hold the RESET button for 1 second while in the MAX/MIN
display mode to clear the memory and start recording new max/min
values.
6. The unit can be wall-mounted or placed on a at surface using the
fold-out footing.
7. The low battery ag will appear on the display when the battery
voltage is low. Replace the battery when this occurs.
Maintenance
Battery Replacement
Open the battery compartment by sliding the battery cover on the rear of
the instrument downward as indicated by the arrow. Replace the 1.5V
‘AAA’ battery and replace the cover.
Contact Customer Support
Customer Support Telephone List: https://support.ir.com/contact
Calibration, Repair, and Returns: repair@extech.com
Technical Support: https://support.ir.com


Produktspezifikationen

Marke: Extech
Kategorie: Messung
Modell: 445713

Brauchst du Hilfe?

Wenn Sie Hilfe mit Extech 445713 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Messung Extech

Bedienungsanleitung Messung

Neueste Bedienungsanleitung fĂŒr -Kategorien-