EXSYS EX-3517 Bedienungsanleitung

EXSYS Regler EX-3517

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für EXSYS EX-3517 (4 Seiten) in der Kategorie Regler. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
1
Thank you for purchasing this 4-Port SATA3 PCI PCIe Card (non-RAID). It is designed
to support up to 4 SATA3 ports with 1 built-in SATA3 Port Mulplier ). It (PM
supports 4 SATA3 devices over one single PCI Express Slot and provides an ideal
soluon to add more SATA drives for your system.
Features:
Supports 2-lane PCIe Gen 2 up to 10Gb/s
Provides 4 Internal SATA3 Host Ports
4 Ports with 2 Double Deck Connectors
Supports up to 4 SATA Devices, no RAID Support
Supports Low Prole Form Factor
Supports SATA3 transfer rate of 6.0Gb/s
Supports Nave Command Queuing (NCQ)
Supports FIS-based switching with Port Mulpliers
Co-resides with Motherboard IDE and SATA devices
Supports AHCI (Advanced Host Controller Interface) Mode
Supports Win 2003, 2008, XP, Vista, Win 7, 8 , 10, .x
Linux and Mac OS
EX- 3517
4-Port SATA3 P e (x2) Card (non-RAID) CI
1. Introducon
2. Board Layout
Low Profile
Bracket
Up: Port 2
Down: Port 1
Up: Port 4
Down: Port 3
Gen 2 PCIe (x2)
Golden Fingers
4-Port SATA3 PCIe (x2) Card
2
Note: Due to the limitaon of the Port Mulpliers, only Port 1
can be the System Boot Drive. Other ports won’t support Boot funcon.
1. Power down the peripherals, then the computer.
2. Remove the computer cover and save the screws.
3. Choose an unused PCI Express bus slot.
4. Unscrew and remove the slot cover. Retain the screw; you will use it when you install
the SATA3 PCIe Card.
5. Place the SATA3 PCIe Card into the slot. Carefully press the board into the slot unl it
seats rmly.
6. Secure the SATA3 PCIe Card with the slot cover screw.
7. Install the internal SATA cables from the SATA connectors to your SATA devices.
8. Carefully reinstall the computer cover. Insert andghten the computer cover screws.
9. Power up the PC and observe the monitor. The BIOS lists all Serial ATA devices
aached to the SATA3 PCIe Card. For example:
If the informaon displayed on your monitor is correct (the installed devices are listed
with the correct device name, etc.), congratulaons! You have successfully installed the
SATA3 PCIe Card in your computer.
Asmedia 106x SATA Controller Ver 1.50 AHCI Mode
Copyright (C) Asmedia Technologies, Inc. All Right
reserved. S.M.A.R.T. Supported
Using PCIE Gen2 p2-x2
Firmware version 150910_00_00_00
Port PMP Model
0 0 KINGSTON SHFS37A120G SATA3
4 0 KINGSTON SHFS37A120G SATA3
5 0 ST3000DM001-9YN166 SATA3
6 0 ST3000DM001-9YN166 SATA3
4-Port SATA3 PCIe (x2) Card
3
The SATA3 PCIe Card supports Advanced Host Controller Interface ( ) mode which gives AHCI
soware developers and hardware designers a standard method for detecng, conguring,
and programming SATA/AHCI adapters. It exposes SATA's advanced capabilies (such as hot
swapping nave command queuing) so it does not need extra drivers for the modern and
operang systems. The following table lists the operaon system supported:
Operang Systems
Support
Windows Server 2012
Yes
Windows Vista (x86, x64)
Yes
Windows 7 (x86, x64)
Yes
Windows 8.x (x86, x64)
Yes
Windows 10.x (x86, x64)
Yes
Mac OS
Yes
Linux Based
Yes (with Kernel 2.6.19 or later)


Produktspezifikationen

Marke: EXSYS
Kategorie: Regler
Modell: EX-3517

Brauchst du Hilfe?

Wenn Sie Hilfe mit EXSYS EX-3517 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Regler EXSYS

Bedienungsanleitung Regler

Neueste Bedienungsanleitung für -Kategorien-