Eurolite LVH-8 Bedienungsanleitung

Eurolite Regler LVH-8

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Eurolite LVH-8 (4 Seiten) in der Kategorie Regler. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/4
www.eurolite.de
USER MANUAL
BEDIENUNGSANLEITUNG
LVH-8
VIDEO CONTROLLED RELAY
© Copyright
Nachdruck verboten!
Reproduction prohibited!
INPUT
VI DE O CO N T R O L L E D RE L AI S
L
L
L
LL
VH-8
VH-8
VH-8
VH-8VH-8
SYNC
LOOP
T HR U
LVH-8 VIDEO CONTROLLED RELAY
Video signal from equipment [NTSC/PAL]
Videosignal von Videogerät [NTSC/PAL]
12-24 V DC
Relay contacts connected to other units
Relaiskontakte angeschlossen an andere Geräte
Acceptor or 75 terminator plugW
Endgerät oder 75 AbschlussW
INPUT
VI DE O C O NT RO L L E D RE L AI S
L
L
L
L
L
VH-8
VH-8
VH-8
VH-8
VH-8
SYNC
LOOP
THRU
POWER
LVH-8 VIDEO CONTROLLED RELAY
VIDEO CONTROLLED RELAY
The LVH-8 serves as a video presence detector for an audio/video system. The unit
generates a control signal based on the absence or presence of valid video signals. The unit
responds to NTSC and PAL signals and features a feed-through output. Power connections
are made using block terminals.
SAFETY INSTRUCTIONS
• Before your initial start-up, please make sure that there are no transport damages. Should
there be any, do not take the device into operation and immediately consult your dealer.
• Operate the device only after having familiarized with its functions. Do not permit operation
by persons not qualified for operating the device.
• Protect the device against humidity and heat. Keep away from heaters and other
heating sources!
• We recommend a frequent cleaning of the device. Disconnect from mains first. Use
a soft lint-free and moistened cloth. Never use alcohol or solvents!
• There are no serviceable parts inside the device. Maintenance and service operations are
only to be carried out by authorized dealers.
• Damage, caused by manual modifications on the device are not subject to warranty. If the
device is used for other purposes than originally intended or if it is not correctly connected,
the product may suffer damages and the guarantee becomes void.
• This product is allowed to be operated with 12-24 V DC. This device falls under protection
class 3 and was designed for indoor use only.
OPERATION
Prior to connecting switch off all units and do not turn them on again until you have made all
necessary connections.
1 Connect your signal source via a 75 coaxial cable with BNC plugs to the jack INPUT.
The input signal fed through is available at the output LOOP THRU. The detection circuit
bridges a 1 volt video line. The LVH-8 may be inserted in a video line with the LOOP THRU
video output feeding a terminated load. It may alternatively be installed at the end of a
video line by installing the supplied 75 terminator plug to the jack LOOP THRU. The unit
responds to valid NTSC or PAL sync while ignoring 50 Hz and 60 Hz hum related to
induction artifacts. Weak signals as low as 0.5 V can be detected. When a valid signal is
detected, the control indicator SYNC lights up and the relay contacts close. Both a
normally-open and a normally-closed contact is provided, permitting the LVH-8 to be
connected as a video presence detector or as a video loss detector.
2 To control another unit with the LVH-8 connect it to the relay contacts.
3 To power the unit 12-24 V DC are required. For this purpose, connect a power source (e.g.
power supply unit, battery) to the terminals DC 12-24. Always observe the correct polarity.
Connect the marked core to the left contact "+".
TECHNICAL SPECIFICATIONS
Power supply: ....................................12-24 V DC, 74 mA
1x video input:....................................0.5-1 Vpp/ 75 BNC, ground referenced
1x video output:..................................Feed-through/ BNC, ground referenced
Control output: ..................................N/O or N/C contacts
Relay contacts: .................................Single-pole, double-throw
Max. switching power: .......................60 W, 125 VA
Max. switching voltage: .....................220 VAC, 250 V DC
Max. switching current: .....................2A
Max. continuous switching current: ...3A
Dimensions (LxWxH):........................76 x 41 x 31 mm
W
W
W
Please note: Every information is subject to change without prior notice. 20.01.2009 ©

Produktspezifikationen

Marke: Eurolite
Kategorie: Regler
Modell: LVH-8

Brauchst du Hilfe?

Wenn Sie Hilfe mit Eurolite LVH-8 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Regler Eurolite

Eurolite

Eurolite DMX Operator 192 Bedienungsanleitung

13 August 2024
Eurolite

Eurolite LVH-5 Bedienungsanleitung

12 August 2024
Eurolite

Eurolite LVH-4 Bedienungsanleitung

12 August 2024
Eurolite

Eurolite LVH-8 Bedienungsanleitung

10 August 2024
Eurolite

Eurolite VSD-108 Bedienungsanleitung

10 August 2024
Eurolite

Eurolite DMX Scene Setter 24/48 Bedienungsanleitung

10 August 2024
Eurolite

Eurolite AVS-402 Bedienungsanleitung

8 August 2024
Eurolite

Eurolite DPMX-1216 Bedienungsanleitung

7 August 2024
Eurolite

Eurolite LVH-6 Bedienungsanleitung

6 August 2024

Bedienungsanleitung Regler

Neueste Bedienungsanleitung für -Kategorien-

PCE Instruments

PCE Instruments PCE-RE100P Bedienungsanleitung

16 Oktober 2024
PCE Instruments

PCE Instruments PCE-RE21R Bedienungsanleitung

16 Oktober 2024
Thrustmaster

Thrustmaster T3PA Add-On Gaming Pedal Set Bedienungsanleitung

6 Oktober 2024
Hori

Hori Battle Pad Bedienungsanleitung

5 Oktober 2024
Saitek

Saitek PS2700 Bedienungsanleitung

4 Oktober 2024
Razer

Razer Wolverine V3 Pro Bedienungsanleitung

3 Oktober 2024
Axor

Axor Citterio E 36771001 Bedienungsanleitung

1 Oktober 2024
Hori

Hori Force Feedback Truck Control System Bedienungsanleitung

1 Oktober 2024
Balam Rush

Balam Rush Kontrol Glow G595 Bedienungsanleitung

30 September 2024
Razer

Razer Panthera Bedienungsanleitung

27 September 2024